Press Releases: << FIRST < PREV Page 1 of 17 NEXT > LAST >>

RDL Wall-Mounted Dante Audio Network Interfaces Now Shipping

Release date: 2016-11-29

RDL is pleased to announce the immediate availability of five new wall-mounted Dante™ audio network interface products. These bi-directional products interface microphone and line level audio with a Dante network and are packaged in a dual-Decora® form factor. Each product is available in white, stainless steel or black.

Click here for complete story...


RDL Introduces Format-A Three-Pair Combiner to Single-Pair Sender

Release date: 2016-02-02

RDL is pleased to introduce the TX-TPSA1A Format-A Three-Pair Combiner to Single-Pair Sender for combining three Format-A signals to a single pair. The TX-TPSA1A is part of the Format-A family of products that send, receive and distribute analog audio and DC power over standard CATx cable and connectors. Three pairs (referred to as Pair A, B and C) of each CATx cable are used for audio signals while one pair distributes 24 Vdc power to connected Format-A products.

Click here for complete story...


RDL Introduces Format-A Power Inserter / Signal Breakout Product

Release date: 2016-02-02

RDL is pleased to introduce the TX-TP4PW Format-A Power Inserter / Signal Breakout module. This product can insert power into Format-A CATx cable runs and also can break out each signal pair to or from Format-A home runs. The TX-TP4PW is part of the Format-A family of products that send, receive and distribute analog audio and DC power over standard CATx cable and connectors. Three pairs (referred to as Pair A, B and C) of each CATx cable are used for audio signals while one pair distributes 24 Vdc power to connected Format-A products.

Click here for complete story...


RDL Introduces Format-A Decora® Dual Mic Preamp with Automatic Gain

Release date: 2015-10-29

RDL is pleased to introduce the D SERIES-TPSM2A Dual Microphone Preamplifier Format-A Sender. The D SERIES-TPSM2A is the latest addition to the expanding group of Format-A products. It provides two XLR microphone inputs with P48 phantom power in a single-gang Decora package. The -TPSM2A connects to other Format-A modules using standard CATx cable or to a Dante™ audio network using RDL’s Format-A / Dante interface products. One of the features that sets the -TPSM2A apart from other in-wall microphone preamplifiers is the automatic gain feature. When the rear-panel GAIN switch is set by the installer for AUTO (automatic) gain, the module automatically sets the gain to 60 dB for dynamic microphones or 40 dB for condenser microphones. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. If the module is used only with condenser microphones, the switch may be set to LOW gain. RDL’s Format-A system utilizes 3 pairs of a standard CATx cable for audio and one pair for distributing 24 Vdc power. These modules drive only two cable pairs, therefore they accept a signal and power from another mic-level or line-level Format-A sender. Like most of RDL’s Decora products the front-panel graphic labels may be customized to meet customer needs. A number of mounting options are available for the -TPSM2A including wall mounts, surface mounts, desktop chassis, Decora cover plates, rack mounts and international wall boxes. Models are available in white, stainless steel or black.

Click here for complete story...


RDL to Introduce a Suite of Dante-enabled Audio Products at InfoComm 2015

Release date: 2015-05-20

RDL is pleased to announce the introduction of a suite of Dante™-enabled products at InfoComm 2015. The new products will provide flexibility, economy and simplicity to Dante networked audio systems. The products will interface standard microphone and line-level audio signals, and the entire group of RDL FORMAT-A endpoints to a Dante audio network. Dante is a complete, reliable solution for high-performance audio distribution over standard IP networks, supporting hundreds of simultaneous channels of uncompressed audio with ultra-low latency and sub-microsecond synchronization accuracy. RDL’s FORMAT-A system is a proven industry-standard family of compatible products that send, receive and distribute audio over standard CATx cable and connectors. The integration of Dante audio networking with FORMAT-A endpoints provides several unique advantages: Locate each mic and line input or output endpoint exactly where it is needed Daisy chain multiple audio endpoints through a single CATx home run Select from a comprehensive array of endpoints including amplifiers, headphone amplifiers, mic/line XLR and stereo audio wall plates Overcome the distance limitations of IP networks with FORMAT-A modules while using standard CATx cable and connectors Simplify the installation and reduce equipment cost with FORMAT-A/Dante integration FORMAT-A products include a popular array of more than 60 standard and customizable Decora®-style, rack-mount and utility-mount endpoints and user interfaces. Other new Dante-enabled products interface any OEM product or jack plate, and RDL and OEM power amplifiers and mixers to a Dante network. The products being introduced at InfoComm will be available in PoE (Power over Ethernet) and non-PoE models. “RDL has been grateful for industry recognition and acceptance as the leader in signal interface for 3 decades. As the industry has moved toward embracing Dante as the preferred networking standard, RDL has developed a broad offering of Dante products to meet everyone’s interface needs. We have a unique position as a U.S. manufacturer of economical, high-quality wall-mounted preamps and jack plates, as well as having a devoted following in the digital audio and studio markets, to incorporate Dante connectivity,” says Joel Bump, President of RDL. “We are glad to contribute to the convergence of AV/IT and share our expertise with RDL” states Lee Ellison, Audinate’s CEO. Ellison adds, “RDL has an aggressive plan to connect their wide variety of products into integrated systems using Dante.” RDL will be displaying its new Dante-enabled products at InfoComm 2015, booth # 359. These products will also be on display at Audinate’s AV networking World (AVNW) training seminar on June 16th at InfoComm 2015. To learn more about the suite of Dante-enabled products being introduced at InfoComm 2015, please stop by InfoComm booth # 359 and visit www.rdlnet.com/Dante. RDL is a leading manufacturer of electronic audio, video, control and interface products. Its products are distributed worldwide for use in commercial and residential audio and video installations and in broadcast and recording facilities. Dante provides manufacturers and users alike with a full suite of tools and capabilities for full plug-and-play operation, including automatic device discovery, software-based signal routing, and complete integration with PCs.

Click here for complete story...


  • US Sales
  • Phone: (800) 281-2683
  • (928) 443-9391
  • Fax: (800) 289-7338
  • (928) 443-9392
  •  
  • US Technical Support
  • Phone: (800) 933-1780
  • (928) 778-3554
  • European Sales & Support
  • Phone: (31) 20-6238983
  • Fax: (31) 20-6225287
Subscribe to our newsletter
Subscribe to our Newsletter
Email: