1 Remote Level Controller - Preset Levels
Remote Level Controller - Preset Levels | | - Remote Selection of Preset Audio Levels
- Pushbutton Level Selection
- 4 Selectable System Levels, or 3 Levels Plus Off
- LED Indication (Green)
- Premium‑Quality Remote Panel
- Professional Aesthetic Appearance
| The RLC3 is designed to directly interface with RDL® control modules which feature a 0 to 10 Vdc control input utilizing an external 10 kΩ resistive control, such as the ST‑VCA2, RU‑VCA2 and RU‑VCA2D voltage controlled amplifiers. The RLC3 has four momentary pushbuttons, each corresponding to one of four levels selected. In a typical installation, the RLC3 is wired to an RDL VCA. The RLC3 runs from the same power supply as the VCA. When power is applied, the RLC3 defaults to the NORM level. One higher level, HIGH, and two lower levels, LOW and MIN, are then available for selection. When the RLC3 is set to the HIGH position, the VCA is at maximum gain. The NORM, LOW, and MIN levels are each adjustable by the installer using trimpots on each side of the RLC3’s body. Once installed, the adjustments are concealed from the user. | Typical Performance: | Interface: | | Direct connection with RDL modules using 0 to 10 Vdc, 10 kΩ resistive control (see ST‑VCA2, RU‑VCA2) | Output: | | Selectable resistance (CTRL Terminal ) to ground in 4 steps: | | | RLC3 OUTPUT ST‑VCA2 GAIN | High: | | 10 kOhm, 0 dB | Norm: | | Adjustable, ‑3 dB to ‑30 dB | Low: | | Adjustable, ‑5 dB to ‑40 dB | Min: | | Adjustable, ‑10 dB to Off | Mounting: | | Mounts in US electrical box or RDL international wall boxes WB‑1U, WB‑2U; decorative plate available separately. | Power Requirement: | | Ground‑referenced, 24 to 33 Vdc @ 30 mA |
|
|
 WB-1U
Universal Wall Box - Single - Mounts RDL Remotes
|  CP-1
Single Cover Plate - white
|  CP-2
Double Cover Plate - white
|  SMB-1G
Surface Mount Boxes for Remote Controls and Panels
|  SMB-2W
Surface Mount Boxes for Remote Controls and Panels
|  SMB-3W
Surface Mount Boxes for Remote Controls and Panels
| SMB-1G
Surface Mount Boxes for Remote Controls and Panels | SMB-2W
Surface Mount Boxes for Remote Controls and Panels | SMB-3W
Surface Mount Boxes for Remote Controls and Panels |  SMB-4W
Surface Mount Boxes for Remote Controls and Panels
|  SMB-2G
Surface Mount Boxes for Remote Controls and Panels
|  SMB-3G
Surface Mount Boxes for Remote Controls and Panels
|  SMB-4G
Surface Mount Boxes for Remote Controls and Panels
|  DC-1W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
|  DC-1G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
|  DC-2W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
|  DC-3W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
|  DC-2G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
|  DC-3G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
|  DC-4G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
|  DC-4W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
|
RU-VCA2D
Local/Remote Control Audio Attenuator - Stereo | ST-VCA2
Voltage Controlled Amplifier - 0 to 10 Vdc | RUC-4
ULTRASTYLE Universal Remote Control |
|
|
|
Copyright © 2008 Radio Design Labs, Inc. RDL, Radio Design Labs, the RDL logo, STICK-ON, RACK-UP and the Rack-Up logo are registered trademarks of Radio Design Labs, Inc. Flat-Pak, RCX, SourceFlex, SupplyFlex, Sure-Lok, TX, ULTRASTYLE, and Specialists in Practical Precision Engineering are trademarks of Radio Design Labs, Inc. All other trademarks are the property of their respective owners. Typical Performance reflects product at publication time exclusive of EMC data, if any, supplied with product. Date last modified: July 22 2008
|
