-
SF-MA100A
Format-A to 100 W Mono Audio Mixer-Amplifier - 70 V or 100 V
• 100 Watts RMS Constant Voltage Amplifier
• 70 V or 100 V Output
• Three Operating Modes
• Mode 1: 3-Input Mixer Amp with No Remote Control
• Mode 2: 3-Input Mixer Amp with VCA for Remote Level Control of Audio Output
• Mode 3: 3-Input Mixer Amp with VCA Remote Control of Each Mixer Input
• Mixes Audio Inputs from Format-A Pair A, Pair B and Pair C
• Format-A Signal and Power Pairs Pass Through to LOOP OUT Jack
• External Level Control Using RDL Type D*-RLC10KM (Mode 2) or D*-RC3 (Mode 3) Remote Controls with RJ45
• Special Software Not Required for Module Setup
• LED Indicators: Amplifier Output Level and Status, and Correct dc Voltage on Format-A Output
• High-Efficiency Class D Operation
• Thermal and Short-Circuit Protection
• Plenum Rated per UL 2043 Standard
SF-NP100A
Network to 100 W Mono Audio Amplifier - 70 V or 100 V
- 100 Watts RMS Constant Voltage Amplifier
- 70 V or 100 V Output
- Compatible with Dante or AES67 Network Audio Sources
- Converts One Network Audio Signal to a Mono Constant Voltage Output
- Converts Three Network Audio Signals to a Format-A Output on Pairs A, B & C
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- 0 dBFS Input for 100 W Output
- External Level Control Using RDL D-RLC10KM-Type Remote Level Controls with RJ45
- Special Software Not Required for Module Setup
- LED Indicators: Network Sync, Amplifier Output Level and Status, Correct dc Voltage on Format-A Output
- High-Efficiency Class D Operation
- Thermal and Short-Circuit Protection
- Plenum Rated per UL 2043 Standard
SF-PA100A
Format-A to 100 W Mono Audio Amplifier - 70 V or 100 V
• 100 Watts RMS Constant Voltage Amplifier
• 70 V or 100 V Output
• Plenum Rated per UL 2043 Standard
• Audio Input is Switch-Selectable from Format-A Pair A, Pair B or Pair C
• Converts One Format-A Audio Signal Pair to a Mono Constant Voltage Output
• Format-A Signal and Power Pairs Pass Through to LOOP OUT Jack
• External Level Control Using RDL D-RLC10KM-Type Remote Level Controls with RJ45
• Special Software Not Required for Module Setup
• LED Indicators: Amplifier Output Level and Status, and Correct dc Voltage on Format-A Output
• High-Efficiency Class D Operation
• Thermal and Short-Circuit Protection