-
RU-BTLA
Bluetooth® Line-Level Audio & Format-A Interface
- Bluetooth 5.3 Audio Input for Installed Sound Systems
- Bluetooth LE (CIS) and Bluetooth Classic (A2DP) Audio Supported
- Supported Codecs: LC3 (BLE), AAC & SBC (A2DP)
- Intuitive Front-Panel Single Button Pairing with LED Status Indication
- Extended Range Under Ideal Conditions, Up To 100 Meters from a Class 1 Device
(Pairing and Connection Range is Limited by Connected Device’s Range) - Rack-Mounted, Free-Standing or Surface-Mounted Operation
- Module Setup Using a Terminal Program or a Bluetooth-Equipped Computer
- Customizable Module ID Name and Programming via Bluetooth Connection
- Supports One or Two RDL Pairing/Status Remote Controls
(D-RBTP or EU-RBTP), Available Separately - Remote Pairing Connections Compatible with Third-Party Dry Contacts
The LED output is a 3.3 Vdc nominal level which:
Remains High when paired,
Low when unpaired, and alternates between high and low in pairing mode. - Stereo Line-Level Balanced +4 dBu XLR and -10 dBV Unbalanced RCA Outputs
- Front-Panel Switch-Selectable Stereo or Mono Line-Level Outputs
- Front-Panel Flush Slotted Attenuator for XLR and RCA Line-Level Outputs
- Front-Panel Switch-Selectable Stereo or Mono Format-A Outputs
- Format-A Mono Outputs Switch-Selectable to Feed Pair A, B or C
- Format-A Stereo Outputs Feed Pairs B (Left Channel) and C (Right Channel)
- In Mono Mode, Daisy-Chain up to Three RU-BTLA Modules to One Format-A Receiver
- Any or All Audio Outputs May Be Used Concurrently
- Locally Powered by 24 Vdc or Remotely Powered Over Twisted Pair Cable from Format-A Receiver
- Format-A Signal and Power Pair Pass-Through on RJ45 Jacks
RU-RN04
Network to Mic/Line Interface 0x4
- Default Configuration Converts 4 Dante/AES67 Channels to Mic or Line Outputs
- 4 X 4 Mixing Matrix Signal Paths and DSP Filters Expand System Design Flexibility
- Ultra-Low Latency: 1 ms Analog to Digital to Analog
- Analog Outputs Connect through XLR or Detachable Terminal Block
- Terminal Block Connections may be Wired Balanced or Unbalanced
- One DSP Filter for Each Dante/AES67 Input
- Three DSP Filters for Each Analog Output
- Selectable DSP Filters: None, Hi-Pass, Lo-Pass, Shelf Hi/Lo, Notch Boost/Cut
- All DSP Filters are Fully Programmable
- Each Output Stage Receives Audio through a Four-Channel Mixer
- Each Output Mixer Source is Adjustable From Unity (Fully On) to OFF
- Analog Outputs are Protected from External Phantom Voltages up to P48
- Each Analog Output Equipped with a Selectable 180° Polarity “Phase” Inverter
- Each Analog Output Equipped with a Selectable Line to Mic Attenuator Pad
- Analog Outputs Adjust in 1 dB Steps Below +4 dBu Line or -46 dBu Mic Level
- Each Output Attenuator is Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Remote Controllable Using Compatible RDL Remote Controls
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Operates at 48 kHz or 96 kHz with High Resolution 24 Bit D/A Conversion
- All Operating Parameters and Settings Programmed using RDL CONSOLE
RU-RN22
Mic/Line Bi-Directional Network Interface 2x2
- Default Configuration Converts Two Mic or Line Inputs to Dante/AES67
- Default Also Converts Two Dante/AES67 Channels to Mic or Line Outputs
- 4 X 4 Mixing Matrix Signal Paths and DSP Filters Expand System Design Flexibility
- Ultra-Low Latency: 2 ms Analog to Digital to Analog
- Analog Inputs and Outputs on XLR and Detachable Terminal Block
- Terminal Block Connections may be Wired Balanced or Unbalanced
- Analog Input Gains Adjustable From 0 dB to 60 dB in 3.3 dB steps
- P48 Phantom Individually Selectable per Input or Automatically Gain-Dependent
- Selectable Audio Compressor/Limiter on Each Analog Input
- One DSP Filter for Each Analog and Dante/AES67 Input
- Three DSP Filters for Each Analog and Dante/AES67 Output
- Selectable DSP Filters: None, Hi-Pass, Lo-Pass, Shelf Hi/Lo, Notch Boost/Cut
- All DSP Filters are Fully Programmable
- Each Output Stage Receives Audio through a Four-Channel Mixer
- Each Output Mixer Source is Adjustable From Unity (Fully On) to OFF
- Analog Outputs are Protected from External Phantom Voltages up to P48
- Each Analog Output Equipped with a Selectable 180° Polarity “Phase” Inverter
- Each Analog Output Equipped with a Selectable Line to Mic Attenuator Pad
- Analog Outputs Adjust in 1 dB Steps Below +4 dBu Line or -46 dBu Mic Level
- Dante/AES67 and Analog Outputs Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Remote Controllable Using Compatible RDL Remote Controls
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Extremely Low Noise <-69 dB Below Operating Level at 60 dB (Max) Input Gain
- Operates at 48 kHz or 96 kHz with High Resolution 24 Bit A/D and D/A Conversion
-
All Operating Parameters and Settings Programmed using RDL CONSOLE
RU-RN40
Mic/Line to Dante Network Interface 4x0
- Default Configuration Converts Four Mic or Line Inputs to Dante/AES67 Outputs
- 4 X 4 Mixing Matrix Signal Paths and DSP Filters Expand System Design Flexibility
- Ultra-Low Latency: 1 ms Analog to Digital to Analog
- XLR and Detachable Terminal Block Provided for Each Input
- Terminal Block Connections may be Wired Balanced or Unbalanced
- Input Gains Adjustable From 0 dB to 60 dB in 3.3 dB steps
- P48 Phantom Individually Selectable per Input or Automatically Gain-Dependent
- Selectable Audio Compressor/Limiter on Each Analog Input
- One DSP Filter for Each Audio Input, Three DSP Filters for Each Dante Output
- Selectable DSP Filters: None, Hi-Pass, Lo-Pass, Shelf Hi/Lo, Notch Boost/Cut
- All DSP Filters are Fully Programmable
- Each Output Stage Receives Audio through a Four-Channel Mixer
- Each Output Mixer Source is Adjustable From Unity (Fully On) to OFF
- Provides Functions of Audio Mixer and/or Distribution Amplifier
- Dante/AES67 Outputs are Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Remote Controllable Using Compatible RDL Remote Controls
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Extremely Low Noise <-69 dB Below Operating Level at 60 dB (Max) Input Gain
- Operates at 48 kHz or 96 kHz with High Resolution 24 Bit A/D Conversion
- All Operating Parameters and Settings Programmed using RDL CONSOLE
RU-RN44
Mic/Line Wired Bi-Directional Network Interface 4x4
- Default Configuration Converts Four Mic or Line Inputs to Dante/AES67
- Default Also Converts Four Dante/AES67 Channels to Mic or Line Outputs
- 8 X 8 Mixing Matrix Signal Paths and DSP Filters Expand System Design Flexibility
- Ultra-Low Latency: 2 ms Analog to Digital to Analog
- Analog Inputs and Outputs on Detachable Terminal Block
- Terminal Block Connections may be Wired Balanced or Unbalanced
- Analog Input Gains Adjustable From 0 dB to 60 dB in 3.3 dB steps
- P48 Phantom Individually Selectable per Input or Automatically Gain-Dependent
- Selectable Audio Compressor/Limiter on Each Analog Input
- One DSP Filter for Each Analog and Dante/AES67 Input
- Three DSP Filters for Each Analog and Dante/AES67 Output
- Selectable DSP Filters: None, Hi-Pass, Lo-Pass, Shelf Hi/Lo, Notch Boost/Cut
- All DSP Filters are Fully Programmable
- Each Output Stage Receives Audio through a Eight-Channel Mixer
- Each Output Mixer Source is Adjustable From Unity (Fully On) to OFF
- Analog Outputs are Protected from External Phantom Voltages up to P48
- Each Analog Output Equipped with a Selectable 180° Polarity “Phase” Inverter
- Each Analog Output Equipped with a Selectable Line to Mic Attenuator Pad
- Analog Outputs Adjust in 1 dB Steps Below +4 dBu Line or -46 dBu Mic Level
- Dante/AES67 and Analog Outputs Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Remote Controllable Using Compatible RDL Remote Controls
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Extremely Low Noise <-69 dB Below Operating Level at 60 dB (Max) Input Gain
- Operates at 48 kHz with High Resolution 24 Bit A/D and D/A Conversion
-
All Operating Parameters and Settings Programmed using RDL CONSOLE
D-RBTP
Remote Pair Button for RU-BTLA
- Remote Control for RU-BTLA Bluetooth® Audio Receiver
- Intuitive Single Button Pairing with LED Status Indication
- Decora®-Style Wall-Mounted Remote Control
- Mounts in Standard US Single-Gang Electrical Box
- Single-Button Operation for Pairing and Disconnecting
- Wired Using 3-Conductor Single-Pair Shielded or Twisted-Pair Cable
- Powered From the RU-BTLA
- LED Indicator for Pairing Status
- Two D SERIES-RBTPs Can Control One RU-BTLA
- Available in Standard RDL White, Stainless, or Black
EU-BT1A
Wall-Mounted Bluetooth® Audio Format-A Interface
- Bluetooth Audio Input for Installed Sound System
- Intuitive Single Button Pairing with LED Status Indication
- Special Software Not Required for Module Setup
- Customizable Module ID Name and Programming via Bluetooth Connection
- Sends Received Bluetooth Audio to RDL Format-A Receivers
- Mono Summed or Stereo Audio Input Mode is Switch-Selectable on Rear Panel
- Rear-Panel Switch Selects which RJ45 Pair (A, B or C) is Fed in Mono Summed Mode
- Daisy-Chain up to Three EU-BT1A modules to One Format-A Receiver in Mono Mode
- Remotely Powered through Twisted Pair Cable
- Signal and Power Pair Pass-Through on RJ45 Jacks
- White Faceplate Laminate is Installed, Field-Replaceable Black Laminate Included
- European 45 mm x 45 mm Chassis Fits in a Standard 60 mm Deep EU Junction Box
EU-BTN21
Wall-Mounted Bluetooth® Audio Dante Network Interface
- Bluetooth Audio Input for Dante or AES67 Networked System
- Bluetooth Stereo or Mono Sum Feeds Two Network Channels
- Return Audio Talk Channel from Dante Network to Bluetooth-Connected Device
- Intuitive Single Button Bluetooth Pairing with LED Status Indication
- Bluetooth Functions are Controllable in RDL CONSOLE Software
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Controllable Functions Include Pairing/Un-pairing, Media Source Track Selection and Level
- Bluetooth Track Title and Artist Data are Multicast on the Network to Compatible Devices
- Customize the Module ID Name, Settings and Mono/Stereo Mode using RDL CONSOLE Software
- White Faceplate Laminate is Installed, Field-Replaceable Black Laminate Included
- European 45 mm x 45 mm Chassis Fits in a Standard 60 mm Deep EU Junction Box
- Module is PoE Powered
EU-NVC2
Network Volume Control
- Rotary Encoder Volume Control with Full-Color LCD Display
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Attenuation Applied to One or Two Dante/AES67 Audio Channels
- Network Audio Channels are Routed Through the EU-NVC2
- Knob Rotation Adjusts Audio Volume Up or Down
- Attenuation Adjustment in 1 dB Steps From 0 to 63 dB then Mute
- Programmable Knob Action Acceleration
- Momentary Knob Push to Mute/Unmute with Screen Indication
- Extended Knob Push to Open Menu
- Menu Allows User to Adjust Output Channel A, B or Both
- Option to Sum Stereo Input to Mono on Outputs A and B Using RDL CONSOLE
- Installer Sets Menu Default and Defines Channel Names Using RDL CONSOLE
- The EU-NVC2 May be Remote Controlled by the RDL D-NMC1R or D-NLC1R
- Selectable Screen Display Color Themes Using RDL CONSOLE
- Adjusts Levels of Network Audio Signals Routed Through It*
- Displays Audio Attenuation Level Applied to Routed Signals*
- PoE Powered
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate
EU-RN02L
Wall-Mounted Line Output Dante Interface 0 x 2
- EU Series Dante or AES67 Network Interface for Two Audio Outputs
- Two Balanced Line-Level Outputs on Front-Panel XLR Jacks
- Outputs Equipped with Software-Controlled Attenuator in 1 dB Steps
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
-
Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
EU-RN02M
Wall-Mounted Mic Output Dante Interface 0 x 2
- EU Series Dante or AES67 Network Interface for Two Audio Outputs
- Two Balanced Mic-Level Outputs on Front-Panel XLR Jacks
- Outputs Equipped with Software-Controlled Attenuator in 1 dB Steps
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
EU-RN20
Wall-Mounted Mic/Line Input Dante Interface 2 x 0
- EU Series Dante or AES67 Network Interface for Two Audio Inputs
- Two Front-Panel Mic/Line Inputs on Balanced XLR Jacks
- RDL Studio-Quality Preamplifiers for Mic Inputs
- Preamplifiers are Independent from A to D Converters
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Software-Selected Input Gain; Mic: 35 dB, 45 dB or 59 dB; Line: Unity or 12 dB
- P48 Mic Phantom Selected by Software for Mic Inputs
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Analog to Digital Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
EU-RN2ML
Wall-Mounted Mic/Line and Line Input Dante Interface 2 x 0
- EU Series Dante or AES67 Network Interface for Two Audio Inputs
- One Balanced Front-Panel XLR Mic-Level or Line-Level Input
- One Line-Level Summed-to-Mono Mini-jack Input
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- RDL Studio-Quality Input Preamplifiers
- Preamplifiers are Independent from A to D Converters
- Software-Selected XLR Input Gain; Mic: 35 dB, 45 dB or 59 dB; Line: Unity or 12 dB
- P48 Mic Phantom Selected by Software for Mic Input
- Software-Selected Mini-jack Input Gain: Unity, Unity +5 dB, Unity -5 dB
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Analog to Digital Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
D-BTN21
Bluetooth® Audio Dante Network Interface
- Bluetooth Audio Input for Dante or AES67 Networked System
- Bluetooth Stereo or Mono Sum Feeds Two Network Channels
- Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
- Intuitive Single Button Bluetooth Pairing with LED Status Indication
- Bluetooth Functions are Controllable in RDL CONSOLE Software
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Bluetooth Functions are Controllable using Compatible RDL Remote Controls
- Controllable Functions Include Pairing/Un-pairing, Media Source Track Selection and Level
- Bluetooth Track Title and Artist Data are Multicast on the Network to Compatible Devices
- Customize the Module ID Name, Settings and Mono/Stereo Mode using RDL CONSOLE Software
- Module is PoE Powered
- Available in Stainless Steel, Black and White
D-NVC2
Dante / AES67 Network Volume Control
- Rotary Encoder Volume Control with Full-Color LCD Display
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Attenuation Applied to One or Two Dante/AES67 Audio Channels
- Network Audio Channels are Routed Through the D*-NVC2
- Knob Rotation Adjusts Audio Volume Up or Down
- Attenuation Adjustment in 1 dB Steps From 0 to 63 dB then Mute
- Programmable Knob Action Acceleration
- Momentary Knob Push to Mute/Unmute with Screen Indication
- Extended Knob Push to Open Menu
- Menu Allows User to Adjust Output Channel A, B or Both
- Option to Sum Stereo Input to Mono on Outputs A and B Using RDL CONSOLE
- Installer Sets Menu Default and Defines Channel Names Using RDL CONSOLE
- The D-NVC2 May be Remote Controlled by RDL D-NMC1R or D-NLC1R
- Selectable Screen Display Color Themes Using RDL CONSOLE
- Adjusts Levels of Network Audio Signals Routed Through It*
- Displays Audio Attenuation Level Applied to Routed Signals*
- PoE Powered
- Available in Stainless Steel, Black and White
DB-BTN21
Bluetooth® Audio Dante Network Interface
- Bluetooth Audio Input for Dante or AES67 Networked System
- Bluetooth Stereo or Mono Sum Feeds Two Network Channels
- Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
- Intuitive Single Button Bluetooth Pairing with LED Status Indication
- Bluetooth Functions are Controllable in RDL CONSOLE Software
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Bluetooth Functions are Controllable using Compatible RDL Remote Controls
- Controllable Functions Include Pairing/Un-pairing, Media Source Track Selection and Level
- Bluetooth Track Title and Artist Data are Multicast on the Network to Compatible Devices
- Customize the Module ID Name, Settings and Mono/Stereo Mode using RDL CONSOLE Software
- Module is PoE Powered
- Available in Stainless Steel, Black and White
Sign inTopShopping cart close