RDL®

D-A2

Line Output Assembly

SKU: D-A2
  • Wall Mounted Consumer Level Outputs
  • Single or Dual Outputs from Mono Source
  • Gold Plated Phono Jack Outputs
  • Transformer Isolation of the Line Outputs
  • Unbalanced Audio Outputs from a Balanced Line Input
  • High Attenuation of Reverse Signals
  • How to Customize
    Category:

    Description

    The D SERIES-A2 is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source. It may be connected to the +4 dBu line level output of any RDL product, even if that output is simultaneously feeding other equipment. The D SERIES-A2 circuit design provides a high degree of audio isolation if a user accidentally feeds a consumer-level source into the D SERIES-A2. The attenuation of such reverse signals is sufficient for most installations. Active RDL modules are available for complete isolation if required. The D SERIES-A2 output jacks are transformer isolated from the balanced line input, and the input shield is separated from the case ground to reduce the possibility of induced hum. The D SERIES-A2 is not intended as an audio input panel.

    The D SERIES-A2 fits directly into back boxes, available from RDL, to fit cabinets or US or international walls (RDL WB-1U). It may also be mounted directly into cabinets or most standard US single gang electrical boxes.

    Specifications

    Attenuated Signal-Reverse Path:< -50 dB (at 150 Ω balanced source output, +4 dBu reference, -10 dBV signal injected into output jack)
    Frequency Response:50 Hz to 20 kHz (±1 dB)
    Input Connections (4):CASE GROUND, SHIELD, + , -
    Input Connector:Full size barrier block
    Input Impedance:10 kΩ balanced bridging, monaural
    Output Connectors (2):Phono jacks with gold contacts
    Input Level:+4 dBu, nominal
    Power Requirement:Passive
    Dimensions:Height: 4.13 in. 10.49 cm; Width: 1.7 in. 4.32 cm; Depth: 2.15 in. 5.47 cm
    Mounting Box Req.:Width: 1.80 in. 4.57 cm; Depth: 1.75 in. 4.45 cm
    Package Type:Cardboard Box
    Tariff code:8536.69.4030
    WEEE weight:0.3 lbs.
    Shipping Weight:0.46 lbs.
    Package Dimensions:3.625 x 4.625 x 2.125 in.

    Related Products

    Connector Plates
    • D-PHN2

      Dual RCA Jacks on Decora® Wall Plate - Solder type

      Customizable Text

    • DB-A2

      Line Output Assembly

      Customizable Text

    • DS-A2

      Line Output Assembly

      Customizable Text

    • DS-PHN2

      Dual RCA Jacks on Decora® Wall Plate - Solder type - Stainless Steel

      Customizable Text

    Transformer Products
    • Balanced to Unbalanced Converter

      TX-A2

      Audio Converter - Balanced to Unbalanced

    • TX-A2D

      Dual Audio Converter - Balanced to Unbalanced

    Related Products

    General Mounting Accessories
    • CP-1

      Single Cover Plate - White

    • CP-1G

      Single Cover Plate - Gray

    • CP-1S

      Single Cover Plate - Stainless Steel

    • CP-2

      Double Cover Plate - White

    • CP-2G

      Double Cover Plate - Gray

    • CP-2S

      Double Cover Plate - Stainless Steel

    • CP-3

      Triple Cover Plate - White

    • CP-3G

      Triple Cover Plate - Gray

    • CP-3S

      Triple Cover Plate - Stainless Steel

    • CP-4

      Quadruple Cover Plate - White

    • CP-4G

      Quadruple Cover Plate - Gray

    • CP-4S

      Quadruple Cover Plate - Stainless Steel

    • DC-1G

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-1W

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-2G

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-2W

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-3G

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-3W

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-4G

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-4W

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • RM-D3

      19" Rack Mount for 3 Decora® Modules

    • RM-D9

      19" Rack Mount for 9 Decora® Modules

    • SMB-1G

      Surface Mount Boxes for Decora® Remote Controls and Panels

    • SMB-1W

      Surface Mount Boxes for Decora® Remote Controls and Panels