RDL®

HR-DAC1

Digital to Analog Converter - 24 bit 192 kHz

SKU: HR-DAC1
  • Broadcast Quality Audio Digital to Analog Conversion
  • Input: AES/EBU, Coaxial or Optical S/PDIF, AES-3ID
  • Outputs: Balanced and Unbalanced Stereo Audio
  • Adjustable Audio Output Gain Trim
  • Dual-LED Audio Output Level VU Metering
  • Operation Up to 24 bits, 192 kHz
  • Exclusive Sure-Lok™ Auto-Recovery Sentinel
  • Transformer Isolated AES/EBU Input
  • Automatic Sample Rate Detection with Indicators
  • Digital Signal Lock Indicator for Valid Inputs
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The HR-DAC1 is the ideal choice in installations requiring high quality analog audio from an AES/EBU, AES-3ID or S/PDIF digital audio source. The HR-DAC1 automatically detects a valid input on any of the four input jacks: S/PDIF optical, S/PDIF coaxial, AES-3ID or AES/EBU. The AES/EBU input is 110 Ω terminated; the S/PDIF coaxial and AES-3ID jacks are 75 Ω terminated. A front-panel LOCK LED indicates the presence of a valid digital audio source without any phase-lock or bit errors. Sample rates from 32 kHz to 192 kHz are supported with front-panel LEDs to indicate standard digital audio rates of 44.1 kHz, 48 kHz, 96 kHz and 192 kHz. Professional operating stability is achieved with RDL's proprietary Sure-Lok™ latch-up auto recovery.

    The digital input is converted to stereo audio using high speed delta-sigma conversion, digital filtering and filtered wideband analog drivers. The high performance, low-noise converters are supplemented with digitally controlled analog gating to produce unparalleled performance. The LEFT and RIGHT output levels are individually adjustable using front-panel knobs. A dual-LED VU meter displays the output level of each channel to facilitate level adjustments. Balanced +4 dBu audio outputs are provided on a rear-panel detachable terminal block and on XLR jacks. Unbalanced -10 dBV outputs are provided on phono jacks.

    The HR-DAC1 is powered from 24 Vdc, which may be connected through the detachable terminal block or through the dc power jack. A front-panel power switch is provided.

    Specifications

    Ambient Operating Environment:0° C to 55° C
    Standards:AES3-2003, IEC60958
    Indicators (10):POWER LED, blue; LOCK LED, green;
    RATE: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz;
    dual-LED VU meters, left and right
    Dynamic Range:> 110 dB (resolution 24-bit unweighted)
    Residual Noise:< -100 dB (10 to 20 kHz, -120 dBFS input)
    < -100 dB (10 to 20 kHz, -120 dBFS input)
    < -110 dB (locked to digital input, digital audio off)
    Phase L to R, R to L:±0.15° (5 Hz to 20 kHz)
    Output Level:Adjustable OFF to +24 dBu (0 dBFS); Left and Right
    Crosstalk:< -100 dB (5 Hz to 3 kHz); < -90 dB (3 kHz to 20 kHz)
    Harmonic attenuation:2nd: -105 dB; 3rd: -108 dB; 4th, 6th: -115 dB;
    5th, 7th: -110 dB; above 7th: <-115 dB, typical
    THD+N:< 0.002% (20 Hz to 20 KHz, below +22 dBu)
    Frequency Response:5 Hz to 24 kHz (± 0.2 dB into high impedance load)
    Resolution:16 to 24 bits
    Sample Rate:32 kHz to 192 kHz
    Outputs (6):Left and Right: 150 Ω bal. XLR and terminal block, +4 dBu; -10 dBV unbal phono jack
    Inputs (4):110 Ω AES/EBU XLR, transformer isolated; S/PDIF optical;
    75 Ω S/PDIF coaxial phono jack; 75 Ω AES-3ID BNC
    Power Requirement:GROUND-REFERENCED 24 Vdc @ 175 mA
    Package Type:Cardboard Box
    Tariff code:8543.70.9860
    WEEE weight:2.225 lbs.
    Shipping Weight:2.575 lbs.
    Package Dimensions:9.5 x 7 x 2.25 in.

    Related Products

    Digital Audio
    • FP-DFC2

      Digital Audio Format Converter (24/192)

    • FP-SPR1

      S/PDIF Repeater / Amplifier

    • HR-ADC1

      Analog to Digital Audio Converter

    • HR-DDA4

      Digital Audio Distributor - 1x4

    • HR-DSX4

      Digital Audio Selector - 4x1

    • HR-UDC1

      Universal Digital Audio Converter - AES/EBU, coaxial or optical S/PDIF, AES-3ID

    Related Products

    Half-Rack Mounting Accessories
    • HR-HRA1

      Rack adapter for HALF-RACK series - fits 10.4" racks

    • HR-RA2

      Rack adapter for HALF-RACK series

    Dimensions

    HR-DAC1

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsFormat
    Engineering Functional BlockAmericanDXF
    Panel Diagram - FrontAmericanDXF
    Panel Diagram - RearAmericanDXF
    Panel Diagram - FrontMetricDXF
    Panel Diagram - RearMetricDXF
    High Res ImagesFormat
    hr-dac1.zipTIF
    Declaration of Conformity
    Download

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink