RDL®

RU-MLD4

Microphone / Line Distribution Amplifier - 1x4

SKU: RU-MLD4
  • Distribution Amplifier with Four Outputs
  • Front Panel XLR Input / Output Jacks
  • Detachable Input / Output Terminal Blocks
  • Switch-selectable Mic or Line Input
  • Switch-selectable Mic Gain and Phantom
  • Gain Trim on Input
  • Each Output Switch-selectable Mic or Line
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The RU-MLD4 is a four channel audio distribution amplifier. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. The input accepts either a balanced microphone or line level signal. Each of the four outputs provides either a microphone or line level signal. Both the front-panel XLR connectors and the rear-panel terminals are active at all times.

    The audio input is equipped with a rear-panel switch to select between MIC and LINE level. Two additional switches allow setting the MIC input for LO or HI gain and for enabling or disabling standard 24 Vdc phantom. The two microphone gain settings allow the connection of a wide variety of dynamic and condenser microphones. Each output is provided with a separate rear-panel switch to set the associated level to either MIC or LINE. Audio outputs are isolated from each other and may be wired balanced or unbalanced. Gain trim is provided on a front-panel control. An RDL Dual-led VU meter is provided above the gain trimmer. The meter is calibrated to indicate +4 dBu for outputs set to line level. The rear panel provides a detachable terminal block and a power input jack to connect 24 Vdc power. Each output of the RU-MLD4T is equipped with a studio-quality audio output transformer.

    Specifications

    Inputs:XLR(front); detachable term block(rear)
    Input level (for +4 dBu output):Switch-selectable (rear panel) MIC/LINE
      Mic:-48 dBu to -3 dBu (LO GAIN); -65 dBu to -20 dBu (HI GAIN)
      Line:-15 dBu to +28 dBu

    Input Impedance:
      Mic:2 kΩ balanced, switchable 24 V phantom (IEC 61938: 2013)
      Line:> 10 kΩ balanced; may be connected unbalanced
    Outputs (4):XLR(front); detachable term block(rear)
    Output level:Switch-selectable (rear panel) MIC/LINE
    Output Impedance:150 Ω balanced
    Gain Trim:Front panel adjustable
      Mic:Off to 52 dB gain (LO GAIN); Off to 69 dB gain (HI GAIN)
      Line:Off to 20 dB gain

    Frequency Response:
      Mic:80 Hz to 50 kHz (± 0.75 dB); < 10 dB @ 20 Hz (integral high-pass filter)
      Line:15 Hz to 50 kHz (± 0.1 dB)
    THD+N:< 0.1% (Mic); < 0.005% (Line)
    CMRR:> 60 dB (Mic); > 50 dB (Line)

    Residual Noise (below +4 dBu LINE output
    or -45 dBu MIC output):
      Mic:-79 dB (50dB Gain); -70 dB (Mic 60dB Gain)
      Line:-85 dB
    Headroom:> 20 dB (above +4 dBu LINE output)
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 90 mA
    Package Type:Cardboard Box
    Tariff code:8543.70.9860
    WEEE weight:1.235 lbs.
    Shipping Weight:1.48 lbs.
    Package Dimensions:6 x 6 x 2.625 in.

    Related Products

    General Wiring Accessories
    • RC-1UR

      19" Universal Rack Chassis

    Rack-Up® Mounting Accessories
    • RU-BR1

      Mounting Bracket for RACK-UP Series

    • RU-HRA1

      10.4" Rack Mount for 1 RACK-UP Series Product

    • RU-RA3R

      Rack adapter for RACK-UP series

    • RU-SMA1

      RACK-UP Mounting Plate - Mounts any RACK-UP module in a cabinet or other flat surface

    • UC-1R

      RACK-UP Enclosure

    • UC-2R

      Double Wide RACK-UP Enclosure

    • WDG1R

      Table Top "Wedge" Chassis

    DIN Rail Mounting Accessories

    Dimensions

    RU-MLD4

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsFormat
    Engineering Functional BlockAmericanDXF
    Panel Diagram - FrontAmericanDXF
    Panel Diagram - RearAmericanDXF
    Panel Diagram - FrontMetricDXF
    Panel Diagram - RearMetricDXF
    High Res ImagesFormat
    ru-mld4.zipTIF
    Declaration of Conformity
    Download

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink