RDL®

RU-VCA2A

Digitally Controlled Attenuators

SKU: RU-VCA2A
  • Local or Remote Audio Level Control
  • Mono or Stereo Attenuation
  • Noiseless Zero-Crossing Adjustment Steps
  • 96 dB Attenuation Range in 0.5 dB Steps
  • Data Bus Provides Adjustment of Multiple Modules
  • Multiple Remote Control Locations Possible
  • Precise Level Tracking on Each Channel
  • Balanced or Unbalanced Line Inputs/Outputs
  • Adjustable Ramp Up/Down Rates
  • Controllable Using Various RDL Remote Controls
  • Selectable Level Control Options:
        Pushbuttons (Internal or External)
        Momentary Pulses (External/Rotary Encoder)
        0 to10 Vdc or 10 kΩ Potentiometer
  • Selectable Power-Up Return to PRESET or LAST Level
  • Selectable MASTER/SLAVE Mode for Control Expansion
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The RU-VCA2A is a full-featured studio-quality dual-channel audio attenuator module for local and/or remote control of balanced or unbalanced line-level sources. Each module can be remote controlled from a single or multiple locations. Rear-panel terminals provide flexible control options using a variety of RDL remote controls or OEM equipment.

    Audio levels are controlled in 0.5 dB steps using noiseless zero-crossing digital attenuators for optimum reliability, precise tracking and long-term click-free service. Exceptional wide-band low-noise performance makes the RU VCA2A suited to level adjustment in the most demanding applications. Rear-panel inputs and outputs may each be wired balanced or unbalanced.

    The RU-VCA2A powers up in one of two operating modes set by a rear-panel switch.

    MOM (momentary) Mode

    In the MOM (momentary) mode, audio level is controlled by momentary pushbuttons or pulses. Remote terminals and front-panel pushbuttons are provided for up and down ramping control. If either button is held in, the audio will ramp automatically. If a button is pulsed (< 0.5 second), the audio will increment one step. The time of both the UP and DOWN ramps is individually adjustable on the front panel. Pushing remote UP and DOWN buttons simultaneously, or pressing the front-panel GO TO PRESET button, returns the audio to a preset level. The preset level is stored by adjusting the desired level using the UP and DOWN buttons, then pressing and holding the front-panel PRESET button for 3 seconds. A rear-panel switch sets the audio power-up level to either the preset level or the last level setting used. Multiple remote control locations are possible in the MOM mode. External control pulses may be either of positive polarity or pulled-to-ground (open-collector).

    0 to 10 VDC Mode

    In the 0 to 10 VDC mode the preset function is disabled and the audio level is controlled by a remote 10 kΩ linear taper pot or by 0 to 10 Vdc. A single remote control location is possible using a remote 10 kΩ pot.

    In both operating modes, two separate 0 to 10 Vdc outputs are provided. The linear RAMP output drives the level display on RDL remote controls; the EQ RAMP output is used to control an automatic RDL Loudness Equalizer (see ST LEQ1). A front-panel 10-LED string display indicates the relative audio level. Control expansion is possible using the EXTERNAL CONTROL DATA jacks. One module can be set as a MASTER module to control the level of one or more additional RU-VCA2A or RU VCA6A modules set to the SLAVE mode.

    Use the RU-VCA2A individually, or combine it with other RDL products as part of a complete system.

    Specifications

    Inputs (2):>10 kΩ Balanced bridging, or Unbalanced, line level
    Frequency Response:10 Hz to 50 kHz (± 0.5 dB)
    THD+N:< 0.005% (20 Hz to 20 kHz)
    Gain:Adjustable from unity to <–96 dB
    Step Size:0.5 dB
    Headroom:> 18 dB (above +4 dBu)
    Residual Noise:< -90 dB (referred to +4 dBu at unity gain)
    CMRR:> 65 dB (50 to 150 Hz)
    Crosstalk:<-95 dB (1 kHz, typ.); < -85 dB (20 Hz to 5 kHz); < -75 dB (5 kHz to 20 kHz)
    Ramp Times:0.5 second delay; then: 3 seconds to 10 seconds
    (UP and DOWN times individually adjustable on front panel)
    Indicators (10):Front-panel LEDs indicating relative audio level (8), MAX condition (green), MIN condition (red)
    Audio Outputs (2):150 Ω balanced (may be connected unbalanced)
    Ramp Output:0 to 10 Vdc, (Ground-referenced) Note: Not intended to drive additional VCA 0-10V inputs
    EQ Ramp Output:0 to 10 Vdc, (Ground-referenced) Note: dc taper intended only to drive RDL Loudness EQ (ST-LEQ1)
    Ambient Operating Environment:0° C to 50° C
    Power Requirement:24 Vdc @ 120 mA, Ground-referenced
    Case Dimensions:5.75" (14.6 cm) W x 1.65" (4.18 cm) H x 3.54" (9.0 cm) D;3.9" (9.9 cm) D with connectors
    Package Type:Cardboard Box
    Package Dimensions:6 x 6 x 2.625 in.
    Shipping Weight:1.335 lbs.
    WEEE Weight:1.09 lbs
    Tariff Code:8543.70.9860

    Related Products

    VCAs & Related Products
    • RU-VCA6A

      Digitally Controlled Attenuators

    • Voltage Controlled Amplifier

      ST-VCA3

      Voltage Controlled Amplifier

    Processing
    • ST-LEQ1

      Loudness Equalizer - Use with VCA

    Related Products

    Rack-Up® Mounting Accessories
    • RU-BR1

      Mounting Bracket for RACK-UP Series

    • RU-HRA1

      10.4" Rack Mount for 1 RACK-UP Series Product

    • RU-RA3R

      Rack adapter for RACK-UP series

    • RU-SMA1

      RACK-UP Mounting Plate - Mounts any RACK-UP module in a cabinet or other flat surface

    • UC-1R

      RACK-UP Enclosure

    • UC-2R

      Double Wide RACK-UP Enclosure

    • WDG1R

      Table Top "Wedge" Chassis

    General Wiring Accessories
    • RC-1UR

      19" Universal Rack Chassis

    DIN Rail Mounting Accessories

    Dimensions

    RU-VCA2A

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsFormat
    Engineering Functional BlockAmericanDXF
    Panel Diagram - RearAmericanDXF
    Panel Diagram - FrontAmericanDXF
    Panel Diagram - FrontMetricDXF
    Panel Diagram - RearMetricDXF
    High Res ImagesFormat
    ru-vca2a.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    Related Products

    • D-RLC10M

      Remote Level Control with Muting

      Customizable Text

    • D-RLC10

      Remote Level Control

      Customizable Text

    • D-RLC10KM

      Remote Level Control with Muting

      Customizable Text

    • DS-RLC10KM

      Remote Level Control with Muting

      Customizable Text

    • DS-RLC10K

      Remote Level Control - 0 to 10 kΩ - Stainless Steel

      Customizable Text

    • White wall mount VCA control

      D-RLC10K

      Remote Level Control - 0 to 10 kΩ

      Customizable Text

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink