RDL®

SF-TPS24A

Line-Level Sender

SKU: SF-TPS24A
  • Eight Separate Three-Pair Format-A Sender Sections
  • Sends up to 24 Audio Channels
  • Three +4 dBu Balanced Inputs per Section
  • Detachable Terminal Block Inputs
  • Audio Inputs to Feed Pairs A, B and C per Section
  • Utilizes All Three Format-A Pairs
  • Local Power Feeds all Modules Connected to OUTPUTs
  • Wiring Fault Protection by Automatic Resetting Fuse
  • Local Power Input on Terminal Block or dc Power Jack
  • Green LED per Section Indicates Validity of Module Remote Power
  • Studio-Quality Precision Active Balanced Circuitry

Description

The SF-TPS24A is an eight-section audio sending chassis compatible with RDL Format-A twisted pair products. Three +4 dBu balanced line-level sources may be connected to each section on a detachable terminal block. That section converts and transmits those signals on pairs A, B and C of the associated RJ45 connector.



The SF-TPS24A feeds all three signal pairs in the twisted pair cable. No other sending modules may be connected on the same cable with each RJ45 output.



The SF-TPS24A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the eight OUTPUT RJ45 jacks. Power for each RJ45 connector is protected against wiring faults by an automatically resetting fuse. Front-Panel green LEDs indicate valid module power on each RJ45.

Specifications

Inputs (24):20 kΩ balanced
Input Connection:Detachable Terminal Block (Balanced)
Input Level:+4 dBu Bal.; +22 dBu Max
Format-A Signal Pairs Used (3):A, B, C (per section)
Output:RDL TP Format-A
Output Connection:RJ45
Frequency Response:10 Hz to 50 kHz (± 0.1 dB)
THD+N:< 0.005%
Noise below +4 dBu:< 90 dB
Crosstalk:< 85 dB (20 Hz to 20 kHz)
Headroom above +4 dBu:> 18 dB
CMRR:> 60 dB (50 Hz to 150 Hz)
Indicators (8):Power (1 per RJ45)
Power Connections (2):Power Jack; Detachable Terminal Block
Ambient Operating Environment:0° C to 50° C
Power Requirement:24 Vdc @ 440 mA (per board) plus connected loads (1.6 A max)
Dimensions:8.74" (22.2 cm) W; 1.68" (4.27 cm) H; 5.78" (14.68 cm) D
Package Type:Cardboard Box
Package Dimensions:9.5" (24.1 cm) W; 2.25" (5.71 cm) H; 7" (17.8 cm) D
Shipping Weight:2.64 lbs.
WEEE weight:2.3 lbs.
Tariff code:8543.70.9860

Related Products

Format-A® Senders
  • D-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - XLR microphone input with phantom

    Customizable Text

  • D-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

    Customizable Text

  • D-TPS3A

    Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA in

    Customizable Text

  • DS-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - Stainless - Stereo RCA jack inputs

    Customizable Text

  • DS-TPS3A

    Active Three-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone & stereo

    Customizable Text

  • TX-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input

  • TX-TPS3A

    Active Three-Pair Sender - Twisted Pair Format-A - Balanced line inputs

  • TX-TPS6A

    Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input

Format-A® Receivers
  • D-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output

    Customizable Text

  • D-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs

    Customizable Text

  • DB-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs

    Customizable Text

  • DS-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR microphone/line outp

    Customizable Text

  • DS-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - Stereo RCA jack outputs

    Customizable Text

  • DS-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo RCA out

    Customizable Text

  • SF-TPR24A

    Line-Level Receiver

  • SF-TPRS12A

    Line-Level Sender / Receiver

  • Format-A twisted pair receiver to balanced line output

    TX-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

  • Format-A Line Level Receiver

    TX-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

  • TX-TPR6A

    Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

Format-A® Distributors
  • RU-TPDA

    Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

  • RU-TPS4A

    Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

Power Inserters / Breakout
  • FP-TP4PW

    Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

  • RU-TP4PW

    Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

  • TX-TP1PW

    Power Inserter - Twisted Pair - 1 set of outputs - Signal loop-through

Related Products

SysFlex™ Mounting Accessories
  • SF-RA1

    SysFlex® Rack Adapter

  • SF-UCB2

    Under Counter Bracket Pair for SysFlex® Products

Dimensions

SF-TPS24A

Downloads

DocumentsFormat
DatasheetPDF
CAD FilesUnitsFormat
Panel Diagram - FrontAmericanDXF
Panel Diagram - FrontMetricDXF
Panel Diagram - RearAmericanDXF
Panel Diagram - RearMetricDXF
Engineering Functional BlockAmericanDXF
High Res ImagesFormat
sf-tps24a.zipTIF
Declaration of Conformity
Download

How To Buy

Direct Dealer Program

Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator
  • Must possess a current resale certificate for your state
Click here to submit a new direct dealer account inquiry

Buy Online

CompanyAddressPhoneLink