-
RU-BTLA
Bluetooth® Line-Level Audio & Format-A Interface
- Bluetooth 5.3 Audio Input for Installed Sound Systems
- Bluetooth LE (CIS) and Bluetooth Classic (A2DP) Audio Supported
- Supported Codecs: LC3 (BLE), AAC & SBC (A2DP)
- Intuitive Front-Panel Single Button Pairing with LED Status Indication
- Extended Range Under Ideal Conditions, Up To 100 Meters from a Class 1 Device
(Pairing and Connection Range is Limited by Connected Device’s Range) - Rack-Mounted, Free-Standing or Surface-Mounted Operation
- Module Setup Using a Terminal Program or a Bluetooth-Equipped Computer
- Customizable Module ID Name and Programming Password via Bluetooth Connection
- Supports One or Two RDL Pairing/Status Remote Controls
(D-RBTP or EU-RBTP), Available Separately - Remote Pairing Connections Compatible with Third-Party Dry Contacts
- Stereo Line-Level Balanced +4 dBu XLR and -10 dBV Unbalanced RCA Outputs
- Front-Panel Switch-Selectable Stereo or Mono Line-Level Outputs
- Front-Panel Flush Slotted Attenuator for XLR and RCA Line-Level Outputs
- Front-Panel Switch-Selectable Stereo or Mono Format-A Outputs
- Format-A Mono Outputs Switch-Selectable to Feed Pair A, B or C
- Format-A Stereo Outputs Feed Pairs B (Left Channel) and C (Right Channel)
- In Mono Mode, Daisy-Chain up to Three RU-BTLA Modules to One Format-A Receiver
- Any or All Audio Outputs May Be Used Concurrently
- Locally Powered by 24 Vdc or Remotely Powered Over Twisted Pair Cable from Format-A Receiver
- Format-A Signal and Power Pair Pass-Through on RJ45 Jacks
RU-RN04
Network to Mic/Line Interface 0x4
- Converts Four Dante Channels to Four Line Outputs with 4×4 Virtual Mixers
- XLR and Removable Terminal Block Available for Each Output
- Provides Functions of Audio Mixer and/or Distribution Amplifier
- Control Settings over Network using RDL Console Software and 3rd Party Control Systems
- Remote Controllable using Compatible RDL Remote Controls
- Assignable Audio Filters for Outputs
- Dante Audio Outputs Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Operates at 48 kHz or 96 kHz Sample Rate with High Resolution 24 Bit A to D Conversion
- Operation from PoE Power or External 24 Vdc
RU-RN22
Mic/Line Bi-Directional Network Interface 2x2
- Mic/Line Bi-Directional Network Interface 2×2
- Converts Two Mic/Line Inputs to Two Dante Channels with 4×4 Virtual Mixers
- Converts Two Dante Channels to Line with Software Controlled Attenuation
- XLR and Removable Terminal Block Available for Each Input and Output
- Provides Functions of Audio Mixer and/or Distribution Amplifier
- Control Settings over Network using RDL Console Software and 3rd Party Control Systems
- Remote Controllable using Compatible RDL Remote Controls
- Selectable Audio Compressor/Limiter and Filters
- P48 Phantom Individually Selectable per Input with Gain-Dependent Auto-Disable
- Input Gain Adjustable From 0 dB to 60 dB in 3.3 dB steps
- Dante Audio Outputs Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Operates at 48 kHz or 96 kHz Sample Rate with High Resolution 24 Bit A to D Conversion
- Extremely Low Noise <-70 dB Below Operating Level at 60 dB (Max) Input Gain
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- Operation from PoE Power or External 24 Vdc
RU-RN40
Mic/Line to Dante Network Interface 4x0
- Converts Four Mic/Line Inputs to Four Dante Channels with 4×4 Virtual Mixers
- XLR and Removable Terminal Block Available for Each Input
- Provides Functions of Audio Mixer and/or Distribution Amplifier
- Control Settings over Network using RDL Console Software and 3rd Party Control Systems
- Remote Controllable using Compatible RDL Remote Controls
- Selectable Audio Compressor/Limiter and Filters
- P48 Phantom Individually Selectable per Input with Gain-Dependent Auto-Disable
- Input Gain Adjustable From 0 dB to 60 dB in 3.3 dB steps
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Operates at 48 kHz or 96 kHz Sample Rate with High Resolution 24 Bit A to D Conversion with High Resolution 24 Bit A to D Conversion
- Extremely Low Noise <-70 dB Below Operating Level at 60 dB (Max) Input Gain
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- Operation from PoE Power or External 24 Vdc
RU-RN44
Mic/Line Wired Bi-Directional Network Interface 4x4
- Mic/Line Bi-Directional Network Interface 4×4
- Converts Four Mic/Line Inputs to Four Dante Channels with 8×8 Virtual Mixers
- Converts Four Dante Channels to Line Outputs with Software Controlled Attenuation
- Removable Terminal Block Available for Each Input and Output
- Provides Functions of Audio Mixer and/or Distribution Amplifier
- Control Settings over Network using RDL Console Software and 3rd Party Control Systems
- Remote Controllable using Compatible RDL Remote Controls
- Selectable Audio Compressor/Limiter and Filters
- P48 Phantom Individually Selectable per Input with Gain-Dependent Auto-Disable
- Input Gain Adjustable From 0 dB to 60 dB in 3.3 dB steps
- Dante Audio Outputs Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Extremely Low Noise <-70 dB Below Operating Level at 60 dB (Max) Input Gain
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- Operation from PoE Power or External 24 Vdc
D-RBTP
Remote Pair Button for RU-BTLA
- Remote Control for RU-BTLA Bluetooth® Audio Receiver
- Intuitive Single Button Pairing with LED Status Indication
- Decora®-Style Wall-Mounted Remote Control
- Mounts in Standard US Single-Gang Electrical Box
- Single-Button Operation for Pairing and Disconnecting
- Wired Using 3-Conductor Single-Pair Shielded or Twisted-Pair Cable
- Powered From the RU-BTLA
- LED Indicator for Pairing Status
- Two D SERIES-RBTPs Can Control One RU-BTLA
- Available in Standard RDL White, Stainless, or Black
EU-BT1A
Wall-Mounted Bluetooth® Audio Format-A Interface
- Bluetooth Audio Input for Installed Sound System
- Intuitive Single Button Pairing with LED Status Indication
- Special Software Not Required for Module Setup
- Customizable Module ID Name and Programming via Bluetooth Connection
- Sends Received Bluetooth Audio to RDL Format-A Receivers
- Mono Summed or Stereo Audio Input Mode is Switch-Selectable on Rear Panel
- Rear-Panel Switch Selects which RJ45 Pair (A, B or C) is Fed in Mono Summed Mode
- Daisy-Chain up to Three EU-BT1A modules to One Format-A Receiver in Mono Mode
- Remotely Powered through Twisted Pair Cable
- Signal and Power Pair Pass-Through on RJ45 Jacks
- White Faceplate Laminate is Installed, Field-Replaceable Black Laminate Included
- European 45 mm x 45 mm Chassis Fits in a Standard 60 mm Deep EU Junction Box
EU-BTN21
Wall-Mounted Bluetooth® Audio Dante Network Interface
- Bluetooth Audio Input for Dante or AES67 Networked System
- Bluetooth Stereo or Mono Sum Feeds Two Network Channels
- Return Audio Talk Channel from Dante Network to Bluetooth-Connected Device
- Intuitive Single Button Bluetooth Pairing with LED Status Indication
- Bluetooth Functions are Controllable in RDL CONSOLE Software
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Controllable Functions Include Pairing/Un-pairing, Media Source Track Selection and Level
- Bluetooth Track Title and Artist Data are Multicast on the Network to Compatible Devices
- Customize the Module ID Name, Settings and Mono/Stereo Mode using RDL CONSOLE Software
- White Faceplate Laminate is Installed, Field-Replaceable Black Laminate Included
- European 45 mm x 45 mm Chassis Fits in a Standard 60 mm Deep EU Junction Box
- Module is PoE Powered
EU-NVC2
Network Volume Control
- Rotary Encoder Volume Control with Full-Color LCD Display
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Attenuation Applied to One or Two Dante/AES67 Audio Channels
- Network Audio Channels are Routed Through the EU-NVC2
- Knob Rotation Adjusts Audio Volume Up or Down
- Attenuation Adjustment in 1 dB Steps From 0 to 63 dB then Mute
- Programmable Knob Action Acceleration
- Momentary Knob Push to Mute/Unmute with Screen Indication
- Extended Knob Push to Open Menu
- Menu Allows User to Adjust Output Channel A, B or Both
- Option to Sum Stereo Input to Mono on Outputs A and B Using RDL CONSOLE
- Installer Sets Menu Default and Defines Channel Names Using RDL CONSOLE
- The EU-NVC2 May be Remote Controlled by the RDL D-NMC1R or D-NLC1R
- Selectable Screen Display Color Themes Using RDL CONSOLE
- Adjusts Levels of Network Audio Signals Routed Through It*
- Displays Audio Attenuation Level Applied to Routed Signals*
- PoE Powered
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate
EU-RN02L
Wall-Mounted Line Output Dante Interface 0 x 2
- EU Series Dante or AES67 Network Interface for Two Audio Outputs
- Two Balanced Line-Level Outputs on Front-Panel XLR Jacks
- Outputs Equipped with Software-Controlled Attenuator in 1 dB Steps
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
-
Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
EU-RN02M
Wall-Mounted Mic Output Dante Interface 0 x 2
- EU Series Dante or AES67 Network Interface for Two Audio Outputs
- Two Balanced Mic-Level Outputs on Front-Panel XLR Jacks
- Outputs Equipped with Software-Controlled Attenuator in 1 dB Steps
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
EU-RN20
Wall-Mounted Mic/Line Input Dante Interface 2 x 0
- EU Series Dante or AES67 Network Interface for Two Audio Inputs
- Two Front-Panel Mic/Line Inputs on Balanced XLR Jacks
- RDL Studio-Quality Preamplifiers for Mic Inputs
- Preamplifiers are Independent from A to D Converters
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Software-Selected Input Gain; Mic: 35 dB, 45 dB or 59 dB; Line: Unity or 12 dB
- P48 Mic Phantom Selected by Software for Mic Inputs
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Analog to Digital Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
EU-RN2ML
Wall-Mounted Mic/Line and Line Input Dante Interface 2 x 0
- EU Series Dante or AES67 Network Interface for Two Audio Inputs
- One Balanced Front-Panel XLR Mic-Level or Line-Level Input
- One Line-Level Summed-to-Mono Mini-jack Input
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- RDL Studio-Quality Input Preamplifiers
- Preamplifiers are Independent from A to D Converters
- Software-Selected XLR Input Gain; Mic: 35 dB, 45 dB or 59 dB; Line: Unity or 12 dB
- P48 Mic Phantom Selected by Software for Mic Input
- Software-Selected Mini-jack Input Gain: Unity, Unity +5 dB, Unity -5 dB
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Analog to Digital Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
ACB-1
Jack Box - Stereo Headphone
- All-Steel Construction
- Single 1/4″ Headphone Jack
- Nylon Bushing for Cable Routing
ACB-2
Jack Box - Dual RCA jacks
- All-Steel Construction
- Gold-Plated RCA Connectors
- Nylon Bushing for Cable Routing
ACM-3
Amplitude Component Monitor
- Maintain Clarity
- Maximize Loudness
- Maximize Stereo Separation
- Reduce Subcarrier Crosstalk
- Assure Consistency of your Signal Coverage
- Maintain Positive Control of Multipath Artifacts
- Maximize Performance From Your FM Transmitter
- Mount using RU Series Mounting Options
Sign inTopShopping cart close