RDL®

EZ-MCP1

Microphone Compressor

SKU: EZ-MCP1
  • Produces Consistent Levels from Any Microphone
  • Installs Between Microphone and Mixer/Amplifier
  • Improves Intelligibility with Fast Automatic Level Control
  • Controls Overloads that Cause Distortion and Clipping
  • Front-Panel Set-Up Trimmer with LED Indicator
  • Automatic Phantom Voltage Switching with LED
  • XLR Input and Output
  • Gold-Plated Connector Contacts
  • Simple Setup using LED Indicator
  • Exceptional Level Control Range (30 dB)
  • Recommended Power Supply ( Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The EZ-MCP1 is an in-line microphone compressor that produces consistent audio levels despite wide variations (up to 30 dB) from the microphone. It is installed between a dynamic or condenser microphone and a mic-level mixer or amplifier input. The only setup required is a front-panel level trimmer that is adjusted during normal speech until the compression LED just begins to flash. A rear-panel output level trimmer is provided although it is typically left in the normal default position. Phantom voltage (24 V) is automatically switched on when the EZ-MCP1 output is connected to a mic jack that provides phantom voltage. The EZ-MCP1 improves sound quality and intelligibility by producing consistent audio levels and controlling overloads that produce distortion and clipping. It is used for recording, paging and public address in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms and commercial sound systems.

    Specifications

    Input:Mic level, -60 to -30 dBu nominal
    Input Impedance:>1 kΩ balanced
    Input / Output Connectors:XLR
    LEVEL Adjustment:Single turn audio taper (front panel)
    Minimum Input Level:-60 dBu (to cross compressor threshold)@ max gain;
    -30 dBu (to cross compressor threshold) @ min gain
    Maximum Input Level:0 dBu @min gain
    Output:Mic level, -55 dBu to -30 dBu, adjustable; NORMAL: -45 dBu
    Output Impedance:150 Ω nominal, balanced
    Output Level Adjustment:Single turn audio taper (rear panel)
    Frequency Response:50 Hz to 20 kHz (± 0.5 dB)
    THD+N:< 0.5% (50 Hz to 20 kHz, at compressor threshold)
    Compression :30 dB, automatic adjusting attack and release times
    Noise: 55 dB (50 Hz to 120 Hz)
    Phantom:24 V (IEC 61938: 2013), present when phantom detected at module output
    Indicators (3):Red LED: COMPRESSION, indicates compressor activity;
    Green LED: PHANTOM, indicates phantom voltage present;
    Blue LED: POWER
    24 Vdc power supply current:55 mA (idle), 60 mA (max.), 70 mA (max. with phantom)
    Package Type:Cardboard Box
    Package Dimensions:9.5 x 7 x 2.25 in.
    Shipping Weight:0.93 lbs.
    WEEE weight:0.53 lbs.
    Tariff code:8543.70.9860

    Related Products

    Microphone Products
    • EZ-MPA1

      Microphone Preamplifier - Stereo Output with Compressors

    • EZ-MPA2

      Dual Microphone Preamplifier - Stereo Output with Compressors

    Related Products

    EZ Mounting Accessories
    • EZ-SMB1

      Surface Mount Bezel for 1/6 Rack Width EZ Products

    • EZ-DC1

      Desktop Chassis for 1/6 Rack Width EZ Products

    • EZ-UCB2

      Under Counter Bracket Pair for all EZ Product Widths

    • EZ-RA6

      Rack Adapter for 6 Increments of 1/6 Rack Width

    • EZ-CC6

      Component Chassis for 6 Increments of 1/6 Rack Width

    • EZ-FP1

      Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6

    • EZ-SD1

      Storage Drawer - 1/6 Rack Width for EZ-RA6 or EZ-CC6

    • EZ-SD2

      Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6

    Dimensions

    EZ-MCP1

    Downloads

    DocumentsFormat
    ManualPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican9.06 KBDXF
    Panel Diagram - FrontAmerican20.78 KBDXF
    Panel Diagram - RearAmerican14.38 KBDXF
    Panel Diagram - FrontMetric20.8 KBDXF
    Panel Diagram - RearMetric14.4 KBDXF
    High Res ImagesFormat
    ez-mcp1.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink