| Product | Description |
|---|
| ACB-1 | Jack Box - Stereo Headphone |
| ACB-2 | Jack Box - Dual RCA jacks |
| ACM-3 | Amplitude Component Monitor |
| AMS-1/4F | 1/4" Headphone Jack - Fits all AMS mounts |
| AMS-1/8F | Stereo Mini-Jack - Terminal block connections |
| AMS-10K | 10K Linear Taper Pot & Knob Assembly - Fits all AMS mounts |
| AMS-10KA | 10K Audio Taper Pot & Knob Assembly - Fits all AMS mounts |
| AMS-1RC | Single RCA Jack Assy - Fits all AMS mounts |
| AMS-BNC | BNC Jack Assy - fits all AMS mounts |
| AMS-FP1 | Filler Plate - fits all AMS mounts |
| AMS-HR6 | Mounting panel for 6 AMS Accessories |
| AMS-LEDB | LED Indicator - Blue |
| AMS-LEDG | LED Indicator - Green |
| AMS-LEDR | LED Indicator - Red |
| AMS-LEDY | LED Indicator - Yellow |
| AMS-PB1 | Momentary SPDT Pushbutton - fits all AMS mounts |
| AMS-PJ1 | Power Jack Assy for PS-24V, AS, KS - fits all AMS mounts |
| AMS-RU4 | Mounting panel for 4 AMS Accessories |
| AMS-SW2 | Rocker Switch DPDT - fits all AMS mounts |
| AMS-TS1 | Illuminated Touch-Activated Pushbutton |
| AMS-XLF | XLR 3-Pin Female Jack - fits all AMS mounts |
| AMS-XLM | XLR 3-Pin Male Jack - fits all AMS mounts |
| AMS-XLRMA | Selectable Mic/Line XLR Output with Phantom Block |
| AV-AC2 | Cable Kit for AV-HK1 - Dual RCA to Mini-Plug; Dual RCA to Mini-Jack |
| AV-DC4 | Line-Level Audio Divider/Combiner with Ground Lift |
| AV-HK1 | "Hum Killer" Audio Isolation Module |
| AV-HK1X | “HUM KILLER” Audio Isolation Transformer - XLR input and output |
| AV-LN4 | Four Channel Line Level Audio to Dante Interface |
| AV-NH1 | Dante to Stereo Headphone Amplifier |
| AV-NL2 | Dante to Two Channel Line/Mic Audio Interface |
| AV-NL4 | Dante to Four Channel Line/Mic Audio Interface |
| AV-XMN4 | Four Channel Mic to Dante Interface |
| CP-1 | Single Cover Plate - White |
| CP-1B | Single Cover Plate - Black |
| CP-1G | Single Cover Plate - Gray |
| CP-1S | Single Cover Plate - Stainless Steel |
| CP-2 | Double Cover Plate - White |
| CP-2B | Double Cover Plate - Black |
| CP-2G | Double Cover Plate - Gray |
| CP-2S | Double Cover Plate - Stainless Steel |
| CP-3 | Triple Cover Plate - White |
| CP-3B | Triple Cover Plate - Black |
| CP-3G | Triple Cover Plate - Gray |
| CP-3S | Triple Cover Plate - Stainless Steel |
| CP-4 | Quadruple Cover Plate - White |
| CP-4B | Quadruple Cover Plate - Black |
| CP-4G | Quadruple Cover Plate - Gray |
| CP-4S | Quadruple Cover Plate - Stainless Steel |
| D-1/4F | 1/4" Phone Jack on Decora® Wall Plate |
| D-A2 | Line Output Assembly |
| D-AVM4 | Audio and Video Monitor Jack Panels |
| D-BLANK | Decora® Wall Plate with No Jack Cut Out |
| D-BNC | BNC Jack on Decora® Wall Plate - Solder type |
| D-BNC/D | Insulated Double BNC Jack on Decora® Wall Plate |
| D-BT1A | Wall-Mounted Bluetooth® Audio Format-A Interface |
| D-BZR | Piezo Alert Module |
| D-CIJ3 | Consumer Input Jacks - Mono |
| D-CIJ3D | Consumer Input Jacks - Stereo |
| D-D1 | Single plate for standard and specialty connectors |
| D-D1T | Single plate for standard and specialty connectors |
| D-D2 | Double plate for standard and specialty connectors |
| D-F | Double Type F Jack on Decora® Wall Plate |
| D-HA1A | Format-A Stereo Headphone Amplifier |
| D-HPA3 | 3.5 Watt Audio Power and Headphone Amplifier |
| D-J1 | Microphone Input Assembly |
| D-J2 | Line Input Assembly |
| D-J3 | Mic/Line Input Assembly |
| D-J3M | Mic/Line Input Assembly |
| D-MJPT | Mini-Jack pass-through plate |
| D-NLC1 | Network Remote Control with LEDs |
| D-NMC1 | Network Remote Control with Screen |
| D-PA3 | 3.5 Watt Audio Amplifier |
| D-PHN1 | Single RCA Jack on Decora® Wall Plate - Solder type |
| D-PHN2 | Dual RCA Jacks on Decora® Wall Plate - Solder type |
| D-PSP1 | Decora-Style Active Loudspeaker |
| D-PSP1A | Decora-Style Active Loudspeaker - Format-A |
| D-PSP1AF | Decora-Style Active Loudspeaker - Format-A |
| D-PSP1F | Decora-Style Active Loudspeaker |
| D-RC2 | Remote Audio Mixing Control |
| D-RC2M | Remote Audio Mixing Control with Muting |
| D-RC2ST | 2 Channel Remote Control for STICK-ON - Remote selection of audio or video sources |
| D-RC3 | Remote Audio Mixing Control |
| D-RC3M | Remote Audio Mixing Control with Muting |
| D-RC4M | 4 Channel Remote Control |
| D-RC4RU | 4 Channel Remote Control for RACK-UP 4x1 Audio or Video Switchers |
| D-RC4ST | 4 Channel Remote Control for ST-SX4 4x1 Audio Switcher |
| D-RCS4 | Remote Channel Selector - 4 Channels - Controls RU-SX4A |
| D-RCX1 | Room Control for RCX-5C Room Combiner |
| D-RCX10R | Remote Volume Control for RCX-5C |
| D-RCX2 | Room Control for RCX-5C Room Combiner |
| D-RLC10 | Remote Level Control |
| D-RLC10K | Remote Level Control - 0 to 10 kΩ |
| D-RLC10KM | Remote Level Control with Muting |
| D-RLC10M | Remote Level Control with Muting |
| D-RLC2 | Remote Level Control - Ramp |
| D-RLC3 | Remote Level Control - Preset levels |
| D-RT2 | Remote Control Selector |
| D-SFRC8 | Room Control Station for SourceFlex Distributed Audio System |
| D-SFRC8L | Audio Selector for SourceFlex Distributed Audio System |
| D-SH1 | Stereo Headphone Amplifier - Decora® panel with user level control |
| D-SH1M | Stereo Headphone Amplifier |
| D-SP1A | 2 Watt Decora-Style 8 Ohm Loudspeaker |
| D-TPA1A | 3.5 W Audio Power Amplifier |
| D-TPR1A | Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output |
| D-TPR2A | Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs |
| D-TPR3A | Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs |
| D-TPRX3A | Three Input Format-A Source Selector |
| D-TPS1A | Active Single-Pair Sender - Twisted Pair Format-A - XLR microphone input with phantom |
| D-TPS2A | Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs |
| D-TPS2AM | Active Two-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo Mini-Jack in |
| D-TPS3A | Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA in |
| D-TPS6A | Passive Single-Pair Sender |
| D-TPS7A | Passive Single-Pair Sender |
| D-TPS8A | Active Two-Pair Sender - Twisted Pair Format-A - Mini-Jack input |
| D-TPSL1A | Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In |
| D-TPSL2A | Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In |
| D-TPSM2A | Active Two-Pair Sender - Dual Microphone Preamplifier - Twisted Pair Format-A |
| D-TPSM2A | Active Two-Pair Sender - Dual Microphone Preamplifier - Twisted Pair Format-A |
| D-XLR2 | XLR 3-pin Female & 3-pin Male on Decora® Wall Plate |
| D-XLR2F | Dual XLR 3-pin Female Jacks on Decora® Wall Plate |
| D-XLR2M | Dual XLR 3-pin Male Jacks on Decora® Wall Plate |
| D-XLR3F | XLR 3-pin Female Jack on Decora® Wall Plate |
| D-XLR3M | XLR 3-pin Male Jack on Decora® Wall Plate |
| DB-1/4F | 1/4" Phone Jack on Decora® Wall Plate |
| DB-A2 | Line Output Assembly |
| DB-BLANK | Decora® Wall Plate with No Jack Cut Out |
| DB-BNC | BNC Jack on Decora® Wall Plate - Solder type |
| DB-BNC/D | Insulated Double BNC Jack on Decora® Wall Plate |
| DB-BT1A | Wall-Mounted Bluetooth® Audio Format-A Interface |
| DB-CIJ3 | Consumer Input Jacks - Mono |
| DB-CIJ3D | Consumer Input Jacks - Stereo |
| DB-D1 | Single plate for standard and specialty connectors |
| DB-D1T | Single plate for standard and specialty connectors |
| DB-D2 | Double plate for standard and specialty connectors |
| DB-F | Double Type F Jack on Decora® Wall Plate |
| DB-HA1A | Format-A Stereo Headphone Amplifier |
| DB-HPA3 | 3.5 Watt Audio Power and Headphone Amplifier |
| DB-J1 | Microphone Input Assembly |
| DB-J2 | Line Input Assembly |
| DB-J3 | Mic/Line Input Assembly |
| DB-J3M | Mic/Line Input Assembly |
| DB-MJPT | Mini-Jack pass-through plate |
| DB-NLC1 | Network Remote Control with LEDs |
| DB-NMC1 | Network Remote Control with Screen |
| DB-PA3 | 3.5 Watt Audio Amplifier |
| DB-PHN1 | Single RCA Jack on Decora® Wall Plate - Solder type |
| DB-PHN2 | Dual RCA Jacks on Decora® Wall Plate - Solder type |
| DB-PSP1 | Decora-Style Active Loudspeaker |
| DB-PSP1A | Decora-Style Active Loudspeaker - Format-A |
| DB-PSP1AF | Decora-Style Active Loudspeaker - Format-A |
| DB-PSP1F | Decora-Style Active Loudspeaker |
| DB-RC2ST | 2 Channel Remote Control for STICK-ON - Remote selection of audio or video sources |
| DB-RC4M | 4 Channel Remote Control |
| DB-RC4RU | 4 Channel Remote Control for RACK-UP 4x1 Audio or Video Switchers |
| DB-RC4ST | 4 Channel Remote Control for ST-SX4 4x1 Audio Switcher |
| DB-RCS4 | Remote Channel Selector - 4 Channels - Controls RU-SX4A |
| DB-RCX1 | Room Control for RCX-5C Room Combiner |
| DB-RCX10R | Remote Volume Control for RCX-5C |
| DB-RCX2 | Room Control for RCX-5C Room Combiner |
| DB-RLC10 | Remote Level Control |
| DB-RLC10K | Remote Level Control - 0 to 10 kΩ |
| DB-RLC10KM | Remote Level Control with Muting |
| DB-RLC10M | Remote Level Control with Muting |
| DB-RLC2 | Remote Level Control - Ramp |
| DB-RLC3 | Remote Level Control - Preset levels |
| DB-RT2 | Remote Control Selector |
| DB-SFRC8 | Room Control Station for SourceFlex Distributed Audio System |
| DB-SFRC8L | Audio Selector for SourceFlex Distributed Audio System |
| DB-SH1 | Stereo Headphone Amplifier - Decora® panel with user level control |
| DB-SH1M | Stereo Headphone Amplifier |
| DB-SP1A | 2 Watt Decora-Style 8 Ohm Loudspeaker |
| DB-TPA1A | 3.5 W Audio Power Amplifier |
| DB-TPR1A | Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output |
| DB-TPR2A | Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs |
| DB-TPR3A | Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs |
| DB-TPRX3A | Three Input Format-A Source Selector |
| DB-TPS1A | Active Single-Pair Sender - Twisted Pair Format-A - XLR microphone input with phantom |
| DB-TPS2A | Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs |
| DB-TPS2AM | Active Two-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo Mini-J+D653ack in |
| DB-TPS3A | Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA inputs |
| DB-TPS8A | Active Two-Pair Sender - Twisted Pair Format-A - Mini-Jack input |
| DB-TPSL1A | Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In |
| DB-TPSL2A | Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In |
| DB-TPSM2A | Active Two-Pair Sender - Dual Microphone Preamplifier - Twisted Pair Format-A |
| DB-XLR2 | XLR 3-pin Female & 3-pin Male on Decora® Wall Plate |
| DB-XLR2F | Dual XLR 3-pin Female Jacks on Decora® Wall Plate |
| DB-XLR2M | Dual XLR 3-pin Male Jacks on Decora® Wall Plate |
| DB-XLR3F | XLR 3-pin Female Jack on Decora® Wall Plate |
| DB-XLR3M | XLR 3-pin Male Jack on Decora® Wall Plate |
| DC-1B | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-1G | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-1W | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-2B | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-2G | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-2W | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-3B | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-3G | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-3W | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-4B | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-4G | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-4W | Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels |
| DC-F | Desktop Chassis Foot Kit |
| DD-BN22 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2 |
| DD-BN2M | Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2 |
| DD-BN2ML | Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2 |
| DD-BN31 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4 |
| DD-BN40 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2 |
| DD-BTN44 | Wall-Mounted Bi-Directional Line-Level and Bluetooth® Audio Dante Interface |
| DD-RN31 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4 |
| DD-RN40 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2 |
| DD-RN42 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2 |
| DDB-BN22 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2 |
| DDB-BN2M | Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2 |
| DDB-BN2ML | Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2 |
| DDB-BN31 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4 |
| DDB-BN40 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2 |
| DDB-BTN44 | Wall-Mounted Bi-Directional Line-Level and Bluetooth® Audio Dante Interface |
| DDB-RN31 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4 |
| DDB-RN40 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2 |
| DDB-RN42 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2 |
| DDS-BN22 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2 |
| DDS-BN2M | Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2 |
| DDS-BN2ML | Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2 |
| DDS-BN31 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4 |
| DDS-BN40 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2 |
| DDS-BTN44 | Wall-Mounted Bi-Directional Line-Level and Bluetooth® Audio Dante Interface |
| DDS-RN31 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4 |
| DDS-RN40 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2 |
| DDS-RN42 | Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2 |
| DG-PSP1 | Decora-Style Active Loudspeaker |
| DG-PSP1A | Decora-Style Active Loudspeaker - Format-A |
| DG-PSP1AF | Decora-Style Active Loudspeaker - Format-A |
| DG-PSP1F | Decora-Style Active Loudspeaker |
| DG-SP1A | 2 Watt Decora-Style 8 Ohm Loudspeaker |
| DMK-5 | Detachable Mounting Kit for RDL Modules |
| DR35-1M | DIN Rail - 1 m |
| DRA-35F | Flat-Pak DIN Rail Adapter |
| DRA-35P | Desktop Power Supply DIN Rail Adapter |
| DRA-35R | RACK-UP DIN Rail Adapter |
| DRA-35S | STICK-ON DIN Rail Adapter - 1 module |
| DRA-35S6 | STICK-ON DIN Rail Adapter - 6 modules |
| DRA-35T | TX Series DIN Rail Adapter |
| DS-1/4F | 1/4" Headphone Jack on Decora® Wall Plate - Stainless Steel |
| DS-A2 | Line Output Assembly |
| DS-AVM4 | Audio and Video Monitor Jack Panels |
| DS-Blank | Decora® Wall Plate with No Jack Cut Out |
| DS-BNC | BNC Jack on Decora® Wall Plate - Solder type - Stainless S+D197teel |
| DS-BNC/D | Insulated Double BNC Jack on Decora® Wall Plate - Stainless Steel |
| DS-BT1A | Wall-Mounted Bluetooth® Audio Format-A Interface |
| DS-CIJ3 | Consumer Input Jacks - Mono |
| DS-CIJ3D | Consumer Input Jacks - Stereo |
| DS-D1 | Single plate for standard and specialty connectors |
| DS-D1T | Single plate for standard and specialty connectors |
| DS-D2 | Double plate for standard and specialty connectors |
| DS-F | Double Type F Jack on Decora® Wall Plate - Stainless S+D197teel |
| DS-HA1A | Format-A Stereo Headphone Amplifier |
| DS-HPA3 | 3.5 Watt Audio Power and Headphone Amplifier |
| DS-J1 | Microphone Input Assembly |
| DS-J2 | Line Input Assembly |
| DS-J3 | Mic/Line Input Assembly |
| DS-J3M | Mic/Line Input Assembly |
| DS-MJPT | Mini-Jack pass-through plate |
| DS-NLC1 | Network Remote Control with LEDs |
| DS-NMC1 | Network Remote Control with Screen |
| DS-PA3 | 3.5 Watt Audio Amplifier |
| DS-PHN1 | Single RCA Jack on Decora® Wall Plate - Solder type - Stainless Steel |
| DS-PHN2 | Dual RCA Jacks on Decora® Wall Plate - Solder type - Stainless Steel |
| DS-PSP1 | Decora-Style Active Loudspeaker |
| DS-PSP1A | Decora-Style Active Loudspeaker - Format-A |
| DS-PSP1AF | Decora-Style Active Loudspeaker - Format-A |
| DS-PSP1F | Decora-Style Active Loudspeaker |
| DS-RC2 | Remote Audio Mixing Control |
| DS-RC2M | Remote Audio Mixing Control with Muting |
| DS-RC2ST | 2 Channel Remote Control for STICK-ON - Remote selection of audio or video sources |
| DS-RC3 | Remote Audio Mixing Control |
| DS-RC3M | Remote Audio Mixing Control with Muting |
| DS-RC4M | 4 Channel Remote Control |
| DS-RC4RU | 4 Channel Remote Control for RACK-UP 4x1 Audio or Video Switchers |
| DS-RC4ST | 4 Channel Remote Control for ST-SX4 4x1 Audio Switcher |
| DS-RCS4 | Remote Channel Selector - 4 Channels - Controls RU-SX4A |
| DS-RCX1 | Room Control for RCX-5C Room Combiner |
| DS-RCX10R | Remote Volume Control for RCX-5C |
| DS-RCX2 | Room Control for RCX-5C Room Combiner |
| DS-RLC10 | Remote Level Control |
| DS-RLC10K | Remote Level Control - 0 to 10 kΩ - Stainless Steel |
| DS-RLC10KM | Remote Level Control with Muting |
| DS-RLC10M | Remote Level Control with Muting |
| DS-RLC2 | Remote Level Control - Ramp |
| DS-RLC3 | Remote Level Control - Preset levels |
| DS-RT2 | Remote Control Selector |
| DS-SFRC8 | Room Control Station for SourceFlex Distributed Audio System |
| DS-SFRC8L | Audio Selector for SourceFlex Distributed Audio System |
| DS-SH1 | Stereo Headphone Amplifier - Decora® panel with user level control |
| DS-SH1M | Stereo Headphone Amplifier |
| DS-SP1A | 2 Watt Decora-Style 8 Ohm Loudspeaker |
| DS-TPA1A | 3.5 W Audio Power Amplifier |
| DS-TPR1A | Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR microphone/line outp |
| DS-TPR2A | Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - Stereo RCA jack outputs |
| DS-TPR3A | Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo RCA out |
| DS-TPRX3A | Three Input Format-A Source Selector |
| DS-TPS1A | Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone input w pha |
| DS-TPS2A | Active Two-Pair Sender - Twisted Pair Format-A - Stainless - Stereo RCA jack inputs |
| DS-TPS2AM | Active Two-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo Mini-Jack in |
| DS-TPS3A | Active Three-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone & stereo |
| DS-TPS6A | Passive Single-Pair Sender |
| DS-TPS7A | Passive Single-Pair Sender |
| DS-TPS8A | Active Two-Pair Sender - Twisted Pair Format-A - Mini-Jack input |
| DS-TPSL1A | Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In |
| DS-TPSL2A | Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In |
| DS-TPSM2A | Active Two-Pair Sender - Dual Microphone Preamplifier - Twisted Pair Format-A |
| DS-XLR2 | XLR 3-pin Female & 3-pin Male on Decora® Wall Plate - Stainless Steel |
| DS-XLR2F | Dual XLR 3-pin Female Jacks on Decora® Wall Plate - Stainless Steel |
| DS-XLR2M | Dual XLR 3-pin Male Jacks on Decora® Wall Plate - Stainless Steel |
| DS-XLR3F | XLR 3-pin Female Jack on Decora® Wall Plate - Stainless Steel |
| DS-XLR3M | XLR 3-pin Male Jack on Decora® Wall Plate - Stainless Steel |
| DTB | STICK-ON® Series Detachable Terminal Block |
| EC-6 | AC Power Extension Cord (6 pack) - North American - 6" |
| EZ-ADA4 | Stereo Audio Distribution Amplifier - 1X4 |
| EZ-AFC2 | Audio Format Converter - Stereo Balanced ↔ Unbalanced |
| EZ-AVX4 | Composite Video and Stereo Audio Input Switcher - 4X1 |
| EZ-CC6 | Component Chassis for 6 Increments of 1/6 Rack Width |
| EZ-DC1 | Desktop Chassis for 1/6 Rack Width EZ Products |
| EZ-DC2 | Desktop Chassis for 1/3 Rack Width EZ Products |
| EZ-FP1 | Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6 |
| EZ-HDA4A | Stereo Headphone Distribution Amp - 1X4 Front-Panel Outputs |
| EZ-HDA4B | Stereo Headphone Distribution Amp - 1X4 Rear-Panel Outputs |
| EZ-HDA6 | Stereo Headphone Distribution Amp - 1X6 Rear-Panel Outputs |
| EZ-HK1 | Stereo Audio Hum Killer |
| EZ-HK2 | Composite Video Hum Killer |
| EZ-HK3 | Audio/Video Hum Killer |
| EZ-HSX4 | Stereo Audio Input Switcher with Headphone Amp - 4X1 |
| EZ-MCP1 | Microphone Compressor |
| EZ-MPA1 | Microphone Preamplifier - Stereo Output with Compressors |
| EZ-MPA2 | Dual Microphone Preamplifier - Stereo Output with Compressors |
| EZ-MX4L | Stereo Line-Level Audio Mixer - 4X1 |
| EZ-MX4ML | Mic and Stereo Line Audio Mixer - 4X1 |
| EZ-MXA20 | 20 W Stereo Audio Mixer-Amplifier with EQ - 8 Ω, with Power Supply |
| EZ-PA20 | 20 W Stereo Audio Amplifier - 8 Ω, with Power Supply |
| EZ-PD3 | Power Supply Distributor |
| EZ-PH1 | Stereo Phono Preamplifier |
| EZ-RA6 | Rack Adapter for 6 Increments of 1/6 Rack Width |
| EZ-SD1 | Storage Drawer - 1/6 Rack Width for EZ-RA6 or EZ-CC6 |
| EZ-SD2 | Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6 |
| EZ-SMB1 | Surface Mount Bezel for 1/6 Rack Width EZ Products |
| EZ-SMB2 | Surface Mount Bezel for 1/3 Rack Width EZ Products |
| EZ-SX4 | Stereo Audio Input Switcher - 4X1 |
| EZ-UCB2 | Under Counter Bracket Pair for all EZ Product Widths |
| EZ-VDA2B | Video Distribution Amplifier - 1X2 BNC NTSC/PAL |
| EZ-VDA3B | Video Distribution Amplifier - 1X3 BNC NTSC/PAL |
| FP-ALC1 | Automatic Level Control - Mono - Terminal block |
| FP-ALC2 | Automatic Level Control - Stereo - RCA Jacks |
| FP-AVDA4 | Stereo Audio/Video Distribution Amplifier - 1x4 - RCA Jacks |
| FP-BUC2 | Balanced to Unbalanced Converter - 2 channel |
| FP-CH8 | Chime Generator - 8 Electronic Chimes |
| FP-CT1 | Locking Cable Tie Bracket for FP-RRA and FP-RRAH |
| FP-DCC1 | 12 Vdc to 24 Vdc Converter |
| FP-DFC2 | Digital Audio Format Converter (24/192) |
| FP-HRA | 10.4" Rack Mount for FLAT-PAK Series Products |
| FP-MP1 | Studio Quality Microphone Preamplifier with Phantom - Terminal block & XLR |
| FP-MPA2 | Dual Microphone Phantom Adapter 12, 24, 48 V - XLR |
| FP-MR2 | Message Repeater |
| FP-MX3R | Remote Controlled Line-Level Mixer |
| FP-MX4 | 4 Channel Audio Mixer - Microphone or line input and output |
| FP-NML2 | Network to Mic/Line Interface |
| FP-NML2P | Network to Mic/Line Interface |
| FP-NML2V | Network to Mic/Line Interface with VCA |
| FP-NML2VP | Network to Mic/Line Interface with VCA |
| FP-PA18 | 18 W Mono Audio Amplifier - 8 Ω, with Power Supply |
| FP-PA18H | 18 W Mono Hi-Temp Audio Amplifier - 8 Ω, with Power Supply |
| FP-PA20 | 20 W Mono Audio Amplifier - 8 Ω |
| FP-PA20A | 20 W Mono Audio Amplifier - 70 V or 100 V |
| FP-PA20B | 20 W Mono Audio Amplifier - 25 V |
| FP-PA35A | 35 W Mono Audio Amplifier - 25 V, 70 V or 100 V, with Power Supply |
| FP-PEQ3 | 3 Band Parametric Equalizer - Terminal blocks & RCA jacks |
| FP-PSB1A | Desktop Power Supply Mounting Bracket |
| FP-RRA | Rack Adapter FLAT-PAK Series - 19" Fixed |
| FP-RRAH | Rack Adapter FLAT-PAK Series - 19" Hinged |
| FP-RRB1 | Rear rack rail mounting kit for any FLAT-PAK module |
| FP-SPR1 | S/PDIF Repeater / Amplifier |
| FP-TP4PW | Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through |
| FP-TPS4A | Format-A Two-Pair Audio Sender |
| FP-TPSR4A | Format-A Two-Pair Audio Sender/Receiver |
| FP-TPX3A | Format-A Twisted Pair Remote Controlled Mixer |
| FP-UBC2 | Unbalanced to Balanced Converter - 2 Channel |
| FP-UBC6 | Unbalanced to Balanced Converter - 6 Channel |
| FP-VDA4 | NTSC/PAL Video Distribution Amplifier - 1x4 - BNC |
| GB6 | Grounding Bar for TS-1D Modules |
| HD-ASC1 | Amplifier Security Cover |
| HD-BP1 | BACK-PACK Rear Cover |
| HD-FP1 | Filler Panel |
| HD-FP2L | Filler Panel with Lens |
| HD-HRA1 | Rack Mount for 1 HD Series Product |
| HD-MA35 | 35 Watt Mixer Amplifier with Power Supply - Low Impedance Output 4 Ohm or 8 Ohm |
| HD-MA35A | 35 Watt Mixer Amplifier with Power Supply - Constant Voltage Output 25 V, 70 V or 100 V |
| HD-MA35U | 35 Watt Mixer Amplifier - 4 Ohm / 8 Ohm, with Power Supply |
| HD-MA35UA | 35 Watt Mixer Amplifier - 25, 70, 100 V, with Power Supply |
| HD-PA35 | 35 Watt Power Amplifier with Power Supply - Low Impedance Output 4 Ohm or 8 Ohm |
| HD-PA35A | 35 Watt Power Amplifier with Power Supply - Constant Voltage Output 25 V, 70 V or 100 V |
| HD-PA35U | 35 Watt Power Amplifier - 4 Ohm / 8 Ohm, with Power Supply |
| HD-PA35UA | 35 Watt Power Amplifier - 25, 70, 100 V, with Power Supply |
| HD-RA2 | Rack Adapter |
| HD-RA35U | 35 Watt Remote Mixer Amplifier - 4 Ohm / 8 Ohm, with Power Supply |
| HD-RA35UA | 35 Watt Remote Mixer Amplifier - 25, 70, 100 V, with Power Supply |
| HD-WM1 | HD Series Wall Mount Bracket |
| HD-WM2 | HD Series Wall Mount Bracket |
| HR-ADC1 | Analog to Digital Audio Converter |
| HR-DAC1 | Digital to Analog Converter - 24 bit 192 kHz |
| HR-DDA4 | Digital Audio Distributor - 1x4 |
| HR-DSX4 | Digital Audio Selector - 4x1 |
| HR-FP1 | HALF-RACK Filler Panel |
| HR-HRA1 | Rack adapter for HALF-RACK series - fits 10.4" racks |
| HR-MCP2 | Dual Microphone Compressor |
| HR-MP2 | Dual Microphone Preamplifier |
| HR-MP2A | Dual Microphone Preamplifier |
| HR-RA2 | Rack adapter for HALF-RACK series |
| HR-RU1 | Mounting Adapter Kit for a RACK-UP Module |
| HR-UDC1 | Universal Digital Audio Converter - AES/EBU, coaxial or optical S/PDIF, AES-3ID |
| MB-1 | Mounting Kit - RU, ST and TX Series |
| MB-2 | Mounting Kit - RU and TX Series |
| MB-3 | Kit to Mount ST, TX Series Modules on FP Panel |
| MBR-1U | 1 RU Mounting Bracket |
| MSR-1 | Snap Rail Adapter - STICK-ON Series |
| PM-1T | Pole Mount Tray |
| PM-3T | Pole Mount Tray |
| PM-3TW | Pole Mount Tray |
| PS-24AS | 24 Vdc Switching Power Supply, North American AC Plug, 500 mA, dc Plug |
| PS-24AX | 24 Vdc Switching Power Supply, Interchangeable AC Plug, 500 mA, dc Plug |
| PS-24KS | 24 Vdc Switching Power Supply, North American AC Plug, 1 A, dc Plug |
| PS-24KX | 24 Vdc Switching Power Supply, Interchangeable AC Plug, 1 A, dc Plug |
| PS-24V3 | 24 Vdc Switching Power Supply, no cord, 3 A, dc Plug |
| PS-24V3A | 24 Vdc Switching Power Supply, with North American cord, 3 A, dc Plug |
| PT-AMG2 | Portable Audio Signal Generator & Monitor |
| PT-ASG1 | Portable Audio Signal Generator |
| PT-IC1 | Carrying Case for PT-AMG2 or PT-ASG1 |
| RC-1UR | 19" Universal Rack Chassis |
| RC-HPS1 | 10.4" Rack Mount for Desktop Power Supply and TX Module |
| RC-HPS3 | 10.4" Rack Mount for 3 Desktop Power Supplies |
| RC-PS5 | 19" Rack Mount for 5 Desktop Power Supplies |
| RCX-5C | RCX Room Combining System Controller |
| RCX-5CM | RCX Room Combining System Controller - With microphone muting |
| RCX-BZL | Bezel for RCX-CD1 |
| RCX-CD1 | Remote Control for RCX-5C Room Combiner |
| RCX-CD1L | Remote Control for RCX-5C Room Combiner |
| RK-2U | 19" Utility Rack Chassis - 2 RU |
| RK-2UX | 19" Utility Rack Chassis - 2 RU extension |
| RM-D3 | 19" Rack Mount for 3 Decora® Modules |
| RM-D9 | 19" Rack Mount for 9 Decora® Modules |
| RM-DFP1 | Decora Filler Panel |
| RM-FP1 | One Rack Unit Filler Panel - 19" rack |
| RM-FP2 | Two Rack Unit Filler Panel - 19" rack |
| RM-MP12A | Audio Monitor Panel - 12 Line or Speaker Inputs |
| RU-ADA4D | Audio Distribution Amplifier |
| RU-ADA8D | Audio Distribution Amplifier |
| RU-ADL2 | Professional Audio Delay - 0 to 135 mS |
| RU-AFC2 | Stereo Audio Format Converter |
| RU-ASX4D | Stereo Audio Selector 4x1 |
| RU-ASX4DR | Remote Controlled Stereo Audio Selector with VCA 4x1 |
| RU-AVX4 | Audio/Video Switcher - 4x1 - RCA |
| RU-BNF | Format-A Bi-Directional Network Interface |
| RU-BNFP | Format-A Bi-Directional Network Interface |
| RU-BR1 | Mounting Bracket for RACK-UP Series |
| RU-D1 | RACK-UP Mount for Decora® Module |
| RU-EQ3 | Three Band Audio Equalizer with Knobs - Terminal block |
| RU-FN | Format-A to Network Interface |
| RU-FNP | Format-A to Network Interface |
| RU-FP1R | RACK-UP Filler Panel |
| RU-HRA1 | 10.4" Rack Mount for 1 RACK-UP Series Product |
| RU-LB2 | Line-Level Bi-Directional Network Interface |
| RU-LB2P | Line-Level Bi-Directional Dante Interface |
| RU-LB4 | Line-Level Bi-Directional Network Interface |
| RU-LB4P | Line-Level Bi-Directional Network Interface |
| RU-MLA2 | Dual Microphone / Line Preamplifier |
| RU-MLA2T | Dual Microphone / Line Preamplifier |
| RU-MLB2 | Mic/Line Bi-Directional Network Interface |
| RU-MLB2P | Mic/Line Bi-Directional Network Interface |
| RU-MLB4 | Mic/Line Bi-Directional Network Interface |
| RU-MLB4P | Mic/Line Bi-Directional Network Interface |
| RU-MLD4 | Microphone / Line Distribution Amplifier - 1x4 |
| RU-MLD4T | Microphone / Line Distribution Amplifier - 1x4 with transformer |
| RU-MX4 | Professional 4 Channel Microphone/Line Mixer with Phantom Power - Microphone and line output |
| RU-MX4L | Professional 4 Channel Line Level Mixer - Microphone and line Output |
| RU-MX4LT | Professional 4 Channel Line Level Mixer with Transformer - Microphone and line output |
| RU-MX4T | Professional 4 Channel Microphone/Line Mixer with Phantom Power & Transformer - Microphone and line output |
| RU-MX5ML | 5 Channel Mic/Line Audio Mixer with Phantom Power |
| RU-NFD | Network to Format-A Interface/Distributor |
| RU-NFDP | Network to Format-A Interface/Distributor |
| RU-NL2 | Network to Line Level Interface |
| RU-NL2P | Network to Line Level Interface |
| RU-NL4 | Network to Line Level Interface |
| RU-NL4P | Network to Line Level Interface |
| RU-NMP44 | Network Mixing Processor - 4x4 |
| RU-PA40D | 40 W Stereo Audio Amplifier with VCA - 8 Ω, with Power Supply |
| RU-PA518 | 10 W Stereo / 18 W Mono Audio Amplifier - 8 Ω |
| RU-RA3R | Rack adapter for RACK-UP series |
| RU-SC2 | RS-232/422 Serial Converter (Full-Duplex) |
| RU-SH1 | Stereo Headphone Amplifier - RACK-UP Series |
| RU-SM16A | 2 Channel Audio Meter |
| RU-SM16D | 4 Channel Audio Meter |
| RU-SMA1 | RACK-UP Mounting Plate - Mounts any RACK-UP module in a cabinet or other flat surface |
| RU-SQ6A | Sequencing Controller - Power up, power down |
| RU-TP4PW | Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through |
| RU-TPDA | Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs |
| RU-TPS4A | Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs |
| RU-UDA4 | Stereo Audio Distribution Amplifier - 2x4 - RCA jacks |
| RU-VA2 | Dual Adjustable Video Attenuator - BNC |
| RU-VCA2A | Digitally Controlled Attenuators |
| RU-VCA6A | Digitally Controlled Attenuators |
| RU-VDA4B | NTSC/PAL Video Distribution Amplifier - 1x4 - BNC |
| RU-VSX4 | Video Switcher - 4x1 - BNC |
| RU2-CS1 | RS-232 Serial Controlled Interface - Computer control |
| SAS-8C | 8 Station Audio Controller for SourceFlex Distributed Audio System |
| SAS-8i | Audio Input Chassis for SourceFlex Distributed Audio System |
| SAS-HC8 | Headphone Amplifier with Source Selection for SourceFlex Distributed Audio System |
| SF-BNC2 | Bidirectional Unbalanced Stereo Audio Network Interface |
| SF-DN4 | Digital Audio to Network Interface |
| SF-MA100A | Format-A to 100 W Mono Audio Mixer-Amplifier - 70 V or 100 V |
| SF-MSM1 | SysFlex® Microphone Stand Mounting Adapter |
| SF-ND2 | Network to Digital Audio Interface |
| SF-NH1 | Dante to Stereo Headphone Amplifier |
| SF-NL2 | Network to Audio Interface |
| SF-NP100A | Network to 100 W Mono Audio Amplifier - 70 V or 100 V |
| SF-NP16E | PoE+ Dante to 16 W Mono Audio Amplifier - 70 V or 100 V |
| SF-NP35E | PoE++ Network to 35 W Mono Audio Amplifier - 70 V or 100 V |
| SF-NP40D | Network to 40 W Stereo Power Amplifier |
| SF-NP50A | Network to 50 W Mono Audio Amplifier - 70 V or 100 V |
| SF-PA100A | Format-A to 100 W Mono Audio Amplifier - 70 V or 100 V |
| SF-PA50A | 50 W Mono Audio Amplifier - 70 V or 100 V |
| SF-RA1 | SysFlex® Rack Adapter |
| SF-TPR24A | Line-Level Receiver |
| SF-TPRS12A | Line-Level Sender / Receiver |
| SF-TPS24A | Line-Level Sender |
| SF-UCB2 | Under Counter Bracket Pair for SysFlex® Products |
| SF-UN1 | USB to Dante Network Interface |
| SF-XMN4 | Microphone to Dante Interface |
| SMB-1B | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMB-1G | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMB-1W | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMB-2B | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMB-2G | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMB-2W | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMB-3B | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMB-3G | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMB-3W | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMB-4B | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMB-4G | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMB-4W | Surface Mount Boxes for Decora® Remote Controls and Panels |
| SMK-12 | STICK-ON Mounting Plate |
| SR-10 | STICK-ON Series 19" Mounting Rack - 10 modules |
| SR-12A | STICK-ON Series 19" Mounting Rack - 12 modules |
| SR-4 | STICK-ON Series Mounting Rack - 7 modules |
| SR-TB10 | Terminal Block Assembly for SR-4 |
| ST-ACR1 | Line-Level Audio Controlled Relay - 0.5 to 5 s |
| ST-ACR1M | Microphone Level Audio Controlled Relay - 0.5 to 5 s delay |
| ST-ACR2 | Line-Level Audio Controlled Relay - 5 to 50 s delay |
| ST-CL2 | Compressor/Limiter - Line Level |
| ST-CX2 | Two Band Active Line-level Crossover |
| ST-CX2S | Subwoofer Crossover Filter |
| ST-DA3 | Line Level Distribution Amplifier - 1x3 |
| ST-EQ3 | 3 Band Equalizer - Line Level |
| ST-FS6 | Ferrite Suppressor / RF Filter |
| ST-GCA3 | Gain Control Amplifier - Line Level |
| ST-GLA1 | Gated Line Amplifier - Noise Gate |
| ST-GSP1 | Gated Speech Preamplifier - Microphone to Line |
| ST-HP3 | High Pass Filter - 300 Hz and 500 Hz |
| ST-IC1 | Intercom Amplifier |
| ST-LCR1 | Logic Controlled Relay - Momentary |
| ST-LCR1H | High Power Logic Controlled Relay - 8 A |
| ST-LCR2 | Logic Controlled Relay - Latching |
| ST-LCR3 | Logic Controlled Relay - Dual Alternate Pulse |
| ST-LEQ1 | Loudness Equalizer - Use with VCA |
| ST-MA2 | 2 W Mono Audio Amplifier with Muting - 8 Ω |
| ST-MPA24 | Dual Microphone Phantom Adapter - 24 V Adjustable |
| ST-MPA48 | Dual Microphone Phantom Adapter - 48 V |
| ST-MX2 | 2 Channel Audio Mixer - Microphone or line input and output |
| ST-MX3 | 3 Channel Audio Mixer - Line input and output |
| ST-NG1 | White and Pink Noise Generator |
| ST-OSC2A | Audio Oscillator - 1kHz and 10 kHz |
| ST-OSC2B | Audio Oscillator - 100 Hz and 400 Hz |
| ST-PA18 | 18 W Mono Audio Amplifier - 8 Ω |
| ST-PA2 | 2 W Mono Audio Amplifier - 8 Ω |
| ST-PA6 | 6 W Mono Audio Amplifier - 8 Ω |
| ST-PBR4 | STICK-ON Mounting Bracket |
| ST-PD5U | Power Distributor - Switching - (PS-24AS/KS/V3A) |
| ST-PH1 | Stereo Phono Preamplifier |
| ST-RG1 | Ramp Generator - 0 to 10 Vdc Output |
| ST-RRB1 | Rear rack rail mounting kit for any STICK-ON module |
| ST-RX2 | Audio Routing Switcher - 1x2 |
| ST-SH2 | Stereo Headphone Amplifier - STICK-ON Series |
| ST-SSR1 | Line-Level Audio Switch - 2x1 |
| ST-SX4 | Unbalanced Audio Switcher - 4x1 |
| ST-TC1 | Telephone System Coupler - CO Line Simulator |
| ST-UBA2 | Unbalanced to Balanced Amplifier - 2 channel |
| ST-UMX3 | 3x1 Universal Audio Mixer - 3 microphone or line inputs x 1 microphone or line output |
| ST-VCA3 | Voltage Controlled Amplifier |
| ST-VOX1 | Voice Operated Relay |
| ST-VP1 | Voice-Over / Paging Module - Manual |
| ST-VP2 | Automatic Ducking Module |
| STA-1 | Dual Balanced/Unbalanced Line Amplifier -12 to 20 dB Gain |
| STA-1M | Audio Line Amplifier - Mono: -14 to 14 dB Gain |
| STA-2A | Dual High Gain Line Amplifiers |
| STD 150 | Passive Audio Divider/Combiner - 150 Ω |
| STD 600 | Passive Audio Divider/Combiner - 600 Ω |
| STD-10K | Passive Audio Divider/Combiner - 10 kΩ |
| STM-1 | Microphone Preamplifier - 50 dB Gain |
| STM-2 | Adjustable Gain Microphone Preamplifier - 35 to 65 dB Gain |
| STM-2X | Switched Microphone Preamplifier - 35 to 65 dB Gain |
| STM-3 | High Gain Microphone Preamplifier - 45 to 75 dB Gain |
| STM-DA3 | Microphone Level Distribution Amplifier - 1x3 |
| STM-LDA3 | Studio Quality Microphone Preamplifier with phantom - 3 line outputs |
| STP-1 | Universal Audio Attenuator - 2 channel |
| STR-19A | STICK-ON Series 19" Racking System - 12 modules |
| STR-19B | STICK-ON Series 19" Racking System - 10 modules |
| STR-H6A | 10.4" Rack Mount for 6 STICK-ON Series Products |
| STS-RF1 | Shielded Chassis for STICK-ON module |
| TP-BN14 | Networked Mic Input and Selectable Monitor Station |
| TP-HA1A | Format-A Stereo Headphone Amplifier |
| TS-1D | Transient Suppressor |
| TX-10B | Bridging Input Transformer |
| TX-1A | Balanced to Unbalanced Transformer - Adjustable |
| TX-1W | Music on Hold Amplifier - 1 Watt |
| TX-70A | 25 V, 70 V, 100 V Speaker Level Input Interface - Unbalanced line output |
| TX-8A | 4 Ohm / 8 Ohm Input Interface |
| TX-8i | Headphone Isolation Transformer |
| TX-A2 | Audio Converter - Balanced to Unbalanced |
| TX-A2D | Dual Audio Converter - Balanced to Unbalanced |
| TX-AFC1F | Balanced to Unbalanced Audio Transformer - XLR, RCA |
| TX-AFC1M | Unbalanced to Balanced Audio Transformer - RCA, XLR |
| TX-AT1 | Audio Isolation Transformer - 600 Ω 1:1 |
| TX-AT1S | Audio Isolation Transformer with Suppression |
| TX-AVX | Automatic Video Switch - 2x1 - BNC |
| TX-HRA3 | 10.4" Rack Mount for 3 TX Series Products |
| TX-J2 | Unbalanced Input Transformer - Unbalanced stereo inputs to summed balanced mono output |
| TX-LC2 | Unbalanced to Balanced Line Combiner |
| TX-LM2 | Line Level to Microphone Level Transformer |
| TX-MVX | Manual Rmt Controlled Video Switch - 2x1 - BNC |
| TX-MX2R | Audio Mixer / Distribution Amplifier |
| TX-PA40D | 40 W Stereo Audio Amplifier - 8 Ω, with Power Supply |
| TX-PCR1 | Paging Controlled Relay |
| TX-PD8X | Switching Power Supply Distributor |
| TX-PSD1 | Paging Sound Detector |
| TX-RA5 | TX Series 19" Racking System - 5 modules 1RU |
| TX-RRB1 | Rear rack rail mounting kit for any TX series module |
| TX-TP1PW | Power Inserter - Twisted Pair - 1 set of outputs - Signal loop-through |
| TX-TP4PW | Power Inserter / Signal Breakout |
| TX-TPR1A | Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output |
| TX-TPR2A | Active Two-Pair Receiver - Twisted Pair Format-A |
| TX-TPR3A | Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs |
| TX-TPR6A | Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output |
| TX-TPS1A | Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input |
| TX-TPS3A | Active Three-Pair Sender - Twisted Pair Format-A - Balanced line inputs |
| TX-TPS6A | Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input |
| TX-TPSA1A | Three-Pair Combiner to Single-Pair Sender |
| TX-VCR | Video Controlled Relay - BNC |
| TX-VLA1 | Video Line Amplifier - Adjustable Gain & EQ |
| UC-1R | RACK-UP Enclosure |
| UC-2R | Double Wide RACK-UP Enclosure |
| WB-1U | Universal Wall Box - Single - Mounts RDL remote controls & wall plates |
| WB-2U | Universal Wall Box - Double - Mounts RDL remote controls & wall plates |
| WDG1R | Table Top "Wedge" Chassis |
| WH1 | Warthog™ Power Supply Adapter - Surface mount |
| WH2 | Warthog™ 19" Power Supply Adapter - Rackmount |
