| Recommended Power Supply ( Included ) | |
|---|---|
| PS-24KS (USA) | PS-24KX (International) |
The EZ-PA20 is a stereo audio amplifier with one line input and a front-panel volume control. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-PA20 is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms and commercial sound systems.
| Input: | > 10 kΩ, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 W out), +22 dBV max. |
| Gain: | Off to 32 dB |
| Outputs (2): | Left and Right, 10 Watts RMS into 8 Ω per channel or 8 Watts RMS into 4 Ω per channel, switchΩselectable output impedance |
| Frequency Response: | 35 Hz to 20 kHz (±1.5 dB, 10 Watts) |
| THD+N: | < 0.25% |
| Crosstalk: | < -68 dB (1 kHz) |
| Noise: | < -70 dB (below 10 Watts) |
| 24 Vdc power supply current: | 160 mA (idle), 1000 mA (max.) |
| Case dimensions: | 5.75” (14.6 cm)W x 5” (12.7 cm)D |
| Mounting size: | 1/3 rack width |
| Package Type: | Cardboard Box |
| Tariff code: | 8518.50.0000 |
| WEEE weight: | 0.945 lbs. |
| Shipping Weight: | 1.365 lbs. |
| Package Dimensions: | 9.5 x 7 x 2.25 in. |
Component Chassis for 6 Increments of 1/6 Rack Width
Desktop Chassis for 1/3 Rack Width EZ Products
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6
Rack Adapter for 6 Increments of 1/6 Rack Width
Storage Drawer - 1/6 Rack Width for EZ-RA6 or EZ-CC6
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6
Surface Mount Bezel for 1/3 Rack Width EZ Products
Under Counter Bracket Pair for all EZ Product Widths
| Documents | Format |
|---|---|
| Manual |
| CAD Files | Units | Format |
|---|---|---|
| Engineering Functional Block | American | DXF |
| Panel Diagram - Front | American | DXF |
| Panel Diagram - Rear | American | DXF |
| Panel Diagram - Front | Metric | DXF |
| Panel Diagram - Rear | Metric | DXF |
| High Res Images | Format |
|---|---|
| ez-pa20.zip | TIF |
| Declaration of Conformity |
|---|
| Download |
Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:
| Company | Address | Phone | Link |
|---|
| Authorized Distributor | Link |
|---|---|
| State name | View |
