RDL®

FP-MPA2

Dual Microphone Phantom Adapter 12, 24, 48 V - XLR

SKU: FP-MPA2
  • Phantom Adapter for Two Mics
  • Selectable Phantom Voltage
  • 12V, 24V, 48V Phantom
  • Selectable Current for 24V Mics
  • All Standard Buildout Resistances
  • Ultra-Compact All Metal Construction
  • Convenience of RDL® FLAT-PAKs™
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones.

    Two identical circuits are provided, with connections through XLR jacks. The microphone is connected to the module through the female XLR jack. The selected phantom voltage is applied to this jack. The microphone signal output is available on a male XLR. Phantom is blocked from this output jack. The phantom voltage is individually selectable for each input. A three position switch is provided for choosing 12 Vdc, 24 Vdc or 48 Vdc. Some microphones operating on 24 Vdc phantom perform optimally with higher value buildout resistances. For these particular 24 Vdc powered microphones, a second switch is provided to select the optimum current. The appropriate voltages are generated through a low-noise dc-dc converter and regulator circuits. Each phantom output is short-circuit protected.

    The FP-MPA2's low profile and compact size permit mounting in confined spaces and in various locations in equipment racks. The location of the input/output jacks permits high-density mounting against flat surfaces while maintaining accessibility to the connectors. Installations requiring multiple FP-MPA2s are ideally designed using FP-MPA2s affixed to rack sides, or by mounting them to either the front or rear rack rails using the RDL FP-RRA.

    Specifications

    Inputs (2):Low-impedance balanced mic
    Outputs (2):Mic signal loop-through
    Voltage and Buildout Standard:IEC 61938: 2013
    Phantom Voltages:12 Vdc, 24 Vdc, 48 Vdc (selectable)
    Selectable Buildouts (24V only):1.2 kΩ NORMAL (standard) or 2.4 kΩ LO (low current)
    Connector Type:XLR
    Ambient Operating Environment:0° C to 50° C
    Power Requirement:24 Vdc @ 120 mA, Ground-referenced
    Dimensions:Height: 1.42 in. 3.61 cm; Width: 3.25 in. 8.26 cm; Length: 6.67 in. 16.94 cm
    Package Type:Cardboard Box
    Package Dimensions:4.375 x 7 x 2.25 in.
    Shipping Weight:1.19 lbs.
    WEEE weight:0.94 lbs.
    Tariff code:8543.70.9860

    Related Products

    Microphone Products
    • EZ-MPA1

      Microphone Preamplifier - Stereo Output with Compressors

    • EZ-MPA2

      Dual Microphone Preamplifier - Stereo Output with Compressors

    • ST-MPA24

      Dual Microphone Phantom Adapter - 24 V Adjustable

    • ST-MPA48

      Dual Microphone Phantom Adapter - 48 V

    • STM-1

      Microphone Preamplifier - 50 dB Gain

    • STM-2

      Adjustable Gain Microphone Preamplifier - 35 to 65 dB gain

    Related Products

    Flat-Pak™ Mounting Accessories
    • FP-HRA

      10.4" Rack Mount for FLAT-PAK Series Products

    • FP-RRB1

      Rear rack rail mounting kit for any FLAT-PAK module

    • FP-RRA

      Rack Adapter FLAT-PAK Series - 19" Fixed

    • FP-RRAH

      Rack Adapter FLAT-PAK Series - 19" Hinged

    DIN Rail Mounting Accessories

    Dimensions

    FP-MPA2

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican3.99 KBDXF
    Panel Diagram - FrontAmerican20.55 KBDXF
    Panel Diagram - FrontMetric21.88 KBDXF
    High Res ImagesFormat
    fp-mpa2.zipTIF
    Declaration of Conformity
    Download

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink