RDL®

FP-NML2V

Network to Mic/Line Interface with VCA

SKU: FP-NML2V
  • Adapts Standard Audio Amplifiers to a Dante Network
  • Converts Two Dante Network Audio Signals to Professional Line Level
  • Separate VCA Provided for Each Output
  • Outputs are Adjustable using RDL or OEM Remote Controls or 0 to 10 Vdc
  • Individually Adjustable Outputs Ideal to Feed Two Separate Amplifiers
  • Each Output is Switch-Selectable for Mic or Line Level
  • Line-Level Outputs Provide +4 dBu with VCA at Maximum
  • Output Amplifiers Provide More than 18 dB Headroom
  • Exceptional Low-Noise and Low-Distortion Performance
  • Crosstalk is Below the Noise Floor
  • 24 Vdc Pass-Through Jack for Power Supply Sharing with RDL Amplifiers (FP-NML2V)
  • High Resolution 24 Bit Digital to Analog Conversion
  • Legendary RDL Analog Filtering Enhances Superb Audio Performance
  • Outputs Mute when Digital Audio Inputs are Inactive
  • Normal or Hot-Standby Operation from PoE (Model FP-NML2VP)
  • Equipped for Rack Mounting or Surface Mounting
  • Recommended Power Supply
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The FP-NML2V modules are Dante audio network interface products compatible with mic-level or line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.

    APPLICATION: The FP-NML2V is a high quality converter that provides professional line-level outputs from two Dante network audio channels. Each un-attenuated line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. Each output is equipped with a recessed mic/line switch that provides 50 dB of attenuation to feed the microphone input of a mixer-amplifier or other equipment with mic inputs.

    Each output is equipped with a VCA circuit for remotely adjusting the output level. Separate remote controls may be used for each output, or a single remote control may be connected to adjust both outputs simultaneously. VCA control uses industry standard 0 to 10 Volts allowing audio levels to be adjusted using a wide variety of industry equipment. RDL offers a range of compatible passive and multi-point rotary-encoder remote controls with and without muting options.

    The FP-NML2V is powered from an external 24 Vdc power supply, available separately. The FP-NML2VP is equipped to operate from a PoE enabled network switch. The FP-NML2VP will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2VP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.

    The FP-NML2V includes a dc output jack and extension cable that allows it to be operated from a common power supply with RDL FLAT-PAK amplifiers. One audio output connects to the FLAT-PAK amplifier input, and the second output may be connected to an additional amplifier.

    The FP-NML2V’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems.

    The FP-NML2V is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.

    Specifications

    Network Connector:RJ45 with Link and Speed indicators
    Digital Audio Ethernet Protocol:Dante
    Transmission Rate:100 Mbps
    Sample Rates Supported:44.1 kHz, 48 kHz (default)
    Bit Depth Supported:24 bits
    Audio Operating Levels:-18 dBFS = +4 dBu
    Outputs (2):Balanced, detachable terminal block
    Output Level:+4 dBu (nominal)
    Output Impedance:150 Ω balanced; 75 Ω unbalanced
    VCA Control:0 to 10 Vdc or 0 to 10 kΩ linear
    VCA Attenuation:0 to > 90 dB, Audio taper
    Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
    THD+N:< 0.1%
    Noise below +4 dBu:< -80 dB (output active); < -95 dB (outputs muted)
    Crosstalk:< 90 dB (1 kHz); 18 dB
    Indicators (3):Ethernet Link and Speed, SYNC
    Power Connections (2):Power Jack; 24 Vdc Pass-Through
    Ambient Operating Environment:0° C to 40° C
    Power Requirement:24 Vdc @ 135 mA, or PoE (FP-NML2VP)
    PoE (FP-NML2VP):Class 0, IEEE 802.3af
    Dimensions:4.85" (12.3 cm) W; 1.75" (4.45 cm) H; 3.25" (8.26 cm) D
    Package Type:Cardboard Box
    Package Dimensions:4.375 x 4.8 x 2.25 in.
    Shipping Weight:0.828 lbs. (FP-NML2V); 0.857 (FP-NML2VP)
    WEEE weight:0.682 lbs. (FP-NML2V); 0.711 (FP-NML2VP)
    Tariff code:8543.70.9100

    Related Products

    Flat-Pak™ Mounting Accessories
    • FP-HRA

      10.4" Rack Mount for FLAT-PAK Series Products

    • FP-RRB1

      Rear rack rail mounting kit for any FLAT-PAK module

    • FP-RRA

      Rack Adapter FLAT-PAK Series - 19" Fixed

    • FP-RRAH

      Rack Adapter FLAT-PAK Series - 19" Hinged

    DIN Rail Mounting Accessories

    Dimensions

    FP-NML2V

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican KBDXF
    Panel Diagram - FrontAmerican KBDXF
    Panel Diagram - RearAmerican KBDXF
    Panel Diagram - FrontMetric KBDXF
    Panel Diagram - RearMetric KBDXF
    High Res ImagesFormat
    fp-nml2v.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    Related Products

    • D-RLC3

      Remote Level Control - Preset levels

      Customizable Text

    • DS-RLC3

      Remote Level Control - Preset levels

      Customizable Text

    • DB-RLC10M

      Remote Level Control with Muting

      Customizable Text

    • DS-RLC10M

      Remote Level Control with Muting

      Customizable Text

    • DB-RLC10

      Remote Level Control

      Customizable Text

    • DS-RLC10

      Remote Level Control

      Customizable Text

    • DB-RLC10K

      Remote Level Control - 0 to 10 kΩ

      Customizable Text

    • DB-RLC10KM

      Remote Level Control with Muting

      Customizable Text

    • DB-RLC3

      Remote Level Control - Preset levels

      Customizable Text

    • D-RLC10KM

      Remote Level Control with Muting

      Customizable Text

    • DS-RLC10KM

      Remote Level Control with Muting

      Customizable Text

    • DS-RLC10K

      Remote Level Control - 0 to 10 kΩ - Stainless steel

      Customizable Text

    • D-RLC10K

      Remote Level Control - 0 to 10 kΩ

      Customizable Text

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink