RDL®

FP-PA20B

20 W Mono Audio Amplifier - 25 V

SKU: FP-PA20B
  • 20 Watts RMS Constant Voltage Amplifier
  • 25 V Output
  • Integral Audio Compressor to Control Clipping
  • High Overall Operating Audio Level
  • Maximized Audio Level for Output Power
  • Audio Quality Superior to Standard Amplifiers
Categories: ,

Description

The FP-PA20B features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. A 25 V amplified output is provided to drive corresponding speakers in a distributed sound system. Audio levels that could cause the amplified output to clip are compressed using two dynamic time constants designed to preserve aural transparency. Normal audio level signals remain unaffected by the compressor thereby preserving audio dynamics and preventing the compressor from increasing feedback potential when the amplifier is used for paging. The FP-PA20B produces average audio levels and audio clarity normally expected of amplifiers delivering much higher output power.

Specifications

Input:Line level (+4 dBu bal; -10 dBV unbal)
Input Impedance:20 kΩ balanced bridging; 10 kΩ unbal
Input / Output Connector:Plug-in terminal block
Gain Adjustment:Single turn audio taper
Minimum Input Levels:Balanced: -26 dBu (to cross compressor threshold)
Unbalanced: -28 dBV (to cross compressor threshold)
Maximum Input Levels:Balanced: +23 dBu
Unbalanced: +15 dBV
Overall Dimensions:Height: 2.3 in. (5.85 cm); Width: 3.25 in. (8.26 cm); Length: 6 in. (15.3 cm)
Frequency Response:50 Hz to 18 kHz (± 3 dB)*
THD+N:
*measured at compressor threshold level equaling 4 W RMS output power.
< 0.1% (@ 1 kHz)*
< 0.5% (50 Hz to 20 kHz)*
Noise:< -80 dB (below 20 W RMS)
Compressor:Threshold 6 dB below rated output, automatic adjusting attack and release
CMRR:> 55 dB (50 Hz to 120 Hz)
Output Power:20 W RMS @ 25 V
Ambient Operating Environment:0° C to 30° C Max; 20° C Recommended
Indicators (2):Red LED: PEAK LED indicates compressor activity
Green LED: Power ON
Power Requirement:24 Vdc @ 1650 mA, Ground referenced(for continuous RMS power output)
24 Vdc @ 1000 mA, Ground referenced (for normal uncompressed audio)
Package Type:Cardboard Box
Tariff code:8543.70.9910
WEEE weight:2.195 lbs.
Shipping Weight:2.41 lbs.
Package Dimensions:4.375 x 7 x 2.25 in.

Related Products

Audio
  • FP-PA20

    20 W Mono Audio Amplifier - 8 Ω

  • FP-PA20A

    20 W Mono Audio Amplifier - 70 V or 100 V

  • Constant voltage amplifier

    FP-PA35A

    35 W Mono Audio Amplifier - 25 V, 70 V or 100 V, with Power Supply

Related Products

Flat-Pak™ Mounting Accessories
  • FP-HRA

    10.4" Rack Mount for FLAT-PAK Series Products

  • FP-RRA

    Rack Adapter FLAT-PAK Series - 19" Fixed

  • FP-RRAH

    Rack Adapter FLAT-PAK Series - 19" Hinged

  • FP-RRB1

    Rear rack rail mounting kit for any FLAT-PAK module

DIN Rail Mounting Accessories

Dimensions

FP-PA20B

Downloads

DocumentsFormat
DatasheetPDF
CAD FilesUnitsFormat
Engineering Functional BlockAmericanDXF
Panel Diagram - FrontAmericanDXF
Panel Diagram - FrontMetricDXF
High Res ImagesFormat
fp-pa20b.zipTIF
Declaration of Conformity
Download

Diagrams

How To Buy

Direct Dealer Program

Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator
  • Must possess a current resale certificate for your state
Click here to submit a new direct dealer account inquiry

Buy Online

CompanyAddressPhoneLink