Wall-mount, rack-mount and other interfaces that connect microphone, line level, Bluetooth and Format-A audio to a Dante audio network.
Need help finding a specific Dante interface? Download our Dante Device Selector spreadsheet here
-
RU-RN04
Network to Mic/Line Interface 0x4
- Default Configuration Converts 4 Dante/AES67 Channels to Mic or Line Outputs
- 4 X 4 Mixing Matrix Signal Paths and DSP Filters Expand System Design Flexibility
- Ultra-Low Latency: 1 ms Analog to Digital to Analog
- Analog Outputs Connect through XLR or Detachable Terminal Block
- Terminal Block Connections may be Wired Balanced or Unbalanced
- One DSP Filter for Each Dante/AES67 Input
- Three DSP Filters for Each Analog Output
- Selectable DSP Filters: None, Hi-Pass, Lo-Pass, Shelf Hi/Lo, Notch Boost/Cut
- All DSP Filters are Fully Programmable
- Each Output Stage Receives Audio through a Four-Channel Mixer
- Each Output Mixer Source is Adjustable From Unity (Fully On) to OFF
- Analog Outputs are Protected from External Phantom Voltages up to P48
- Each Analog Output Equipped with a Selectable 180° Polarity “Phase” Inverter
- Each Analog Output Equipped with a Selectable Line to Mic Attenuator Pad
- Analog Outputs Adjust in 1 dB Steps Below +4 dBu Line or -46 dBu Mic Level
- Each Output Attenuator is Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Remote Controllable Using Compatible RDL Remote Controls
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Operates at 48 kHz or 96 kHz with High Resolution 24 Bit D/A Conversion
- All Operating Parameters and Settings Programmed using RDL CONSOLE
RU-RN22
Mic/Line Bi-Directional Network Interface 2x2
- Default Configuration Converts Two Mic or Line Inputs to Dante/AES67
- Default Also Converts Two Dante/AES67 Channels to Mic or Line Outputs
- 4 X 4 Mixing Matrix Signal Paths and DSP Filters Expand System Design Flexibility
- Ultra-Low Latency: 2 ms Analog to Digital to Analog
- Analog Inputs and Outputs on XLR and Detachable Terminal Block
- Terminal Block Connections may be Wired Balanced or Unbalanced
- Analog Input Gains Adjustable From 0 dB to 60 dB in 3.3 dB steps
- P48 Phantom Individually Selectable per Input or Automatically Gain-Dependent
- Selectable Audio Compressor/Limiter on Each Analog Input
- One DSP Filter for Each Analog and Dante/AES67 Input
- Three DSP Filters for Each Analog and Dante/AES67 Output
- Selectable DSP Filters: None, Hi-Pass, Lo-Pass, Shelf Hi/Lo, Notch Boost/Cut
- All DSP Filters are Fully Programmable
- Each Output Stage Receives Audio through a Four-Channel Mixer
- Each Output Mixer Source is Adjustable From Unity (Fully On) to OFF
- Analog Outputs are Protected from External Phantom Voltages up to P48
- Each Analog Output Equipped with a Selectable 180° Polarity “Phase” Inverter
- Each Analog Output Equipped with a Selectable Line to Mic Attenuator Pad
- Analog Outputs Adjust in 1 dB Steps Below +4 dBu Line or -46 dBu Mic Level
- Dante/AES67 and Analog Outputs Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Remote Controllable Using Compatible RDL Remote Controls
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Extremely Low Noise <-69 dB Below Operating Level at 60 dB (Max) Input Gain
- Operates at 48 kHz or 96 kHz with High Resolution 24 Bit A/D and D/A Conversion
-
All Operating Parameters and Settings Programmed using RDL CONSOLE
RU-RN40
Mic/Line to Dante Network Interface 4x0
- Default Configuration Converts Four Mic or Line Inputs to Dante/AES67 Outputs
- 4 X 4 Mixing Matrix Signal Paths and DSP Filters Expand System Design Flexibility
- Ultra-Low Latency: 1 ms Analog to Digital to Analog
- XLR and Detachable Terminal Block Provided for Each Input
- Terminal Block Connections may be Wired Balanced or Unbalanced
- Input Gains Adjustable From 0 dB to 60 dB in 3.3 dB steps
- P48 Phantom Individually Selectable per Input or Automatically Gain-Dependent
- Selectable Audio Compressor/Limiter on Each Analog Input
- One DSP Filter for Each Audio Input, Three DSP Filters for Each Dante Output
- Selectable DSP Filters: None, Hi-Pass, Lo-Pass, Shelf Hi/Lo, Notch Boost/Cut
- All DSP Filters are Fully Programmable
- Each Output Stage Receives Audio through a Four-Channel Mixer
- Each Output Mixer Source is Adjustable From Unity (Fully On) to OFF
- Provides Functions of Audio Mixer and/or Distribution Amplifier
- Dante/AES67 Outputs are Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Remote Controllable Using Compatible RDL Remote Controls
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Extremely Low Noise <-69 dB Below Operating Level at 60 dB (Max) Input Gain
- Operates at 48 kHz or 96 kHz with High Resolution 24 Bit A/D Conversion
- All Operating Parameters and Settings Programmed using RDL CONSOLE
RU-RN44
Mic/Line Wired Bi-Directional Network Interface 4x4
- Default Configuration Converts Four Mic or Line Inputs to Dante/AES67
- Default Also Converts Four Dante/AES67 Channels to Mic or Line Outputs
- 8 X 8 Mixing Matrix Signal Paths and DSP Filters Expand System Design Flexibility
- Ultra-Low Latency: 2 ms Analog to Digital to Analog
- Analog Inputs and Outputs on Detachable Terminal Block
- Terminal Block Connections may be Wired Balanced or Unbalanced
- Analog Input Gains Adjustable From 0 dB to 60 dB in 3.3 dB steps
- P48 Phantom Individually Selectable per Input or Automatically Gain-Dependent
- Selectable Audio Compressor/Limiter on Each Analog Input
- One DSP Filter for Each Analog and Dante/AES67 Input
- Three DSP Filters for Each Analog and Dante/AES67 Output
- Selectable DSP Filters: None, Hi-Pass, Lo-Pass, Shelf Hi/Lo, Notch Boost/Cut
- All DSP Filters are Fully Programmable
- Each Output Stage Receives Audio through a Eight-Channel Mixer
- Each Output Mixer Source is Adjustable From Unity (Fully On) to OFF
- Analog Outputs are Protected from External Phantom Voltages up to P48
- Each Analog Output Equipped with a Selectable 180° Polarity “Phase” Inverter
- Each Analog Output Equipped with a Selectable Line to Mic Attenuator Pad
- Analog Outputs Adjust in 1 dB Steps Below +4 dBu Line or -46 dBu Mic Level
- Dante/AES67 and Analog Outputs Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Remote Controllable Using Compatible RDL Remote Controls
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Extremely Low Noise <-69 dB Below Operating Level at 60 dB (Max) Input Gain
- Operates at 48 kHz with High Resolution 24 Bit A/D and D/A Conversion
-
All Operating Parameters and Settings Programmed using RDL CONSOLE
EU-BTN21
Wall-Mounted Bluetooth® Audio Dante Network Interface
- Bluetooth Audio Input for Dante or AES67 Networked System
- Bluetooth Stereo or Mono Sum Feeds Two Network Channels
- Return Audio Talk Channel from Dante Network to Bluetooth-Connected Device
- Intuitive Single Button Bluetooth Pairing with LED Status Indication
- Bluetooth Functions are Controllable in RDL CONSOLE Software
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Controllable Functions Include Pairing/Un-pairing, Media Source Track Selection and Level
- Bluetooth Track Title and Artist Data are Multicast on the Network to Compatible Devices
- Customize the Module ID Name, Settings and Mono/Stereo Mode using RDL CONSOLE Software
- White Faceplate Laminate is Installed, Field-Replaceable Black Laminate Included
- European 45 mm x 45 mm Chassis Fits in a Standard 60 mm Deep EU Junction Box
- Module is PoE Powered
EU-NVC2
Network Volume Control
- Rotary Encoder Volume Control with Full-Color LCD Display
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Attenuation Applied to One or Two Dante/AES67 Audio Channels
- Network Audio Channels are Routed Through the EU-NVC2
- Knob Rotation Adjusts Audio Volume Up or Down
- Attenuation Adjustment in 1 dB Steps From 0 to 63 dB then Mute
- Programmable Knob Action Acceleration
- Momentary Knob Push to Mute/Unmute with Screen Indication
- Extended Knob Push to Open Menu
- Menu Allows User to Adjust Output Channel A, B or Both
- Option to Sum Stereo Input to Mono on Outputs A and B Using RDL CONSOLE
- Installer Sets Menu Default and Defines Channel Names Using RDL CONSOLE
- The EU-NVC2 May be Remote Controlled by the RDL D-NMC1R or D-NLC1R
- Selectable Screen Display Color Themes Using RDL CONSOLE
- Adjusts Levels of Network Audio Signals Routed Through It*
- Displays Audio Attenuation Level Applied to Routed Signals*
- PoE Powered
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate
EU-RN02L
Wall-Mounted Line Output Dante Interface 0 x 2
- EU Series Dante or AES67 Network Interface for Two Audio Outputs
- Two Balanced Line-Level Outputs on Front-Panel XLR Jacks
- Outputs Equipped with Software-Controlled Attenuator in 1 dB Steps
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
-
Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
EU-RN02M
Wall-Mounted Mic Output Dante Interface 0 x 2
- EU Series Dante or AES67 Network Interface for Two Audio Outputs
- Two Balanced Mic-Level Outputs on Front-Panel XLR Jacks
- Outputs Equipped with Software-Controlled Attenuator in 1 dB Steps
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
EU-RN20
Wall-Mounted Mic/Line Input Dante Interface 2 x 0
- EU Series Dante or AES67 Network Interface for Two Audio Inputs
- Two Front-Panel Mic/Line Inputs on Balanced XLR Jacks
- RDL Studio-Quality Preamplifiers for Mic Inputs
- Preamplifiers are Independent from A to D Converters
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Software-Selected Input Gain; Mic: 35 dB, 45 dB or 59 dB; Line: Unity or 12 dB
- P48 Mic Phantom Selected by Software for Mic Inputs
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Analog to Digital Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
EU-RN2ML
Wall-Mounted Mic/Line and Line Input Dante Interface 2 x 0
- EU Series Dante or AES67 Network Interface for Two Audio Inputs
- One Balanced Front-Panel XLR Mic-Level or Line-Level Input
- One Line-Level Summed-to-Mono Mini-jack Input
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- RDL Studio-Quality Input Preamplifiers
- Preamplifiers are Independent from A to D Converters
- Software-Selected XLR Input Gain; Mic: 35 dB, 45 dB or 59 dB; Line: Unity or 12 dB
- P48 Mic Phantom Selected by Software for Mic Input
- Software-Selected Mini-jack Input Gain: Unity, Unity +5 dB, Unity -5 dB
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Analog to Digital Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
AV-LN4
Four Channel Line Level Audio to Dante Interface
- Dante Network Interface for Four Audio Line-Level Inputs
- Each XLR Input Provides a Network Digital Audio Level of -20 dBFS for a Balanced +4 dBu Input
- Four XLR Front-Panel Inputs
- Dual-LED VU Meter for Each Input
- Special Software Not Required for Module Setup
- High Resolution 24 Bit Analog to Digital Conversion
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
- Mounts on a Microphone Stand using an RDL SF-MSM1
AV-NH1
Dante to Stereo Headphone Amplifier
- Converts Two Dante Network Audio Signals to a Stereo Headphone
- Output on Professional Quality 3.5 mm stereo Mini-Jack or ¼” Jack
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Front-Panel Output Level Control
- Special Software Not Required for Module Setup
- Exceptional Low-Noise and Low-Distortion Performance
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
- Mounts on a Microphone Stand using an RDL SF-MSM1
AV-NL2
Dante to Two Channel Line/Mic Audio Interface
- Converts Two Dante Network Audio Signals to Balanced Analog
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Each Output Switch-Selectable for Mic or Line Level
- Normal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom
- Microphone Output Level is Attenuated 50 dB
- Each Output is Protected Against Phantom Voltage up to 48 Vdc
- Special Software Not Required for Module Setup
- Exceptional Low-Noise and Low-Distortion Performance
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af)
- Equipped for SysFlex® Rack Mounting or Surface Mounting
AV-NL4
Dante to Four Channel Line/Mic Audio Interface
- Converts Four Dante Network Audio Signals to Balanced Analog
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Each Output Switch-Selectable for Mic or Line Level
- Normal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom
- Microphone Output Level is Attenuated 50 dB
- Each Output is Protected Against Phantom Voltage up to 48 Vdc
- Special Software Not Required for Module Setup
- Exceptional Low-Noise and Low-Distortion Performance
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
- Mounts on a Microphone Stand using an RDL SF-MSM1
AV-XMN4
Four Channel Mic to Dante Interface
- Dante Network Interface for Four Audio Mic Inputs
- Each XLR Input Provides Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
- 48 V Mic Phantom (P48) on each input
- Four XLR Front-Panel Inputs
- Converts Four Standard XLR Mic Audio Sources to Dante Network Channels
- Special Software Not Required for Module Setup
- High Resolution 24 Bit Analog to Digital Conversion
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
- Mounts on a Microphone Stand using an RDL SF-MSM1
D-BTN21
Bluetooth® Audio Dante Network Interface
- Bluetooth Audio Input for Dante or AES67 Networked System
- Bluetooth Stereo or Mono Sum Feeds Two Network Channels
- Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
- Intuitive Single Button Bluetooth Pairing with LED Status Indication
- Bluetooth Functions are Controllable in RDL CONSOLE Software
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Bluetooth Functions are Controllable using Compatible RDL Remote Controls
- Controllable Functions Include Pairing/Un-pairing, Media Source Track Selection and Level
- Bluetooth Track Title and Artist Data are Multicast on the Network to Compatible Devices
- Customize the Module ID Name, Settings and Mono/Stereo Mode using RDL CONSOLE Software
- Module is PoE Powered
- Available in Stainless Steel, Black and White
Sign inTopShopping cart close