RDL®

D-SH1M

Stereo Headphone Amplifier

SKU: D-SH1M
  • Integral Long-Life VCA Stereo Level Control
  • Balanced or Unbalanced Inputs
  • Switch-Selectable Input Sensitivity
  • Switch-Selectable Mono (Left) or Stereo Operation
  • Amplifier to Drive High or Low Impedance Headsets
  • Output: Mini-Jack
  • How to Customize
    Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The D/DS-SH1M is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. It is ideally suited to applications as diverse as language translation, museums, interview studios and music stores. The -SH1 is a dual channel headphone amplifier with balanced/unbalanced left and right inputs. Each input accepts operating levels between -20 dBV and +20 dBu. Two recessed slide switches located on the side of the rear enclosure are set prior to mounting the module. One switch is provided for setting the input sensitivity. The mode switch selects between stereo and mono operation. In the mono position, the left input is used to drive both output channels. When the module is used in a monaural system, only the left channel input must be wired. The front panel level control is a long life potentiometer controlling matched VCAs. Audio does not pass through this control, assuring years of noise free level adjustment. The output amplifiers deliver more than 50 mW into either high or low impedance headphones. Module operation is from a 24 Vdc ground referenced power supply.

    Specifications

    Inputs (2):10 kΩ balanced or unbalanced bridging
    Input Level:+4 dBu nominal (Low input sensitivity);
    -15 dBV nominal (High input sensitivity)
    Maximum Input Level:+21 dBu (Low input sensitivity);
    +3 dBu (High input sensitivity)
    Output Signal:10 mW into 100 Ω (normal rated);
    Output Signal:50 mW into 100 Ω (maximum)
    THD+N:< 0.5% @ 1 kHz
    Frequency Response:30 Hz to 20 kHz (±2 dB)
    Noise:< -70 dB below normal operating level
    Gain:User-adjustable on front panel; 18.5 dB (maximum, High input sensitivity);
    Unity (maximum, Low input sensitivity)
    CMRR:> 60 dB (50 to 120 Hz)
    Crosstalk:Below noise floor (20 Hz to 20 kHz)
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 50 mA
    Package Type:Cardboard Box
    Tariff code:8543.70.9860
    WEEE weight:0.305 lbs.
    Shipping Weight:0.455 lbs.
    Package Dimensions:3.625 x 4.625 x 2.125 in.

    Related Products

    Headphone Amplifiers
    • Black Wall-Mounted Stereo Headphone Amplifier

      DB-SH1M

      Stereo Headphone Amplifier

      Customizable Text

    • DS-SH1

      Stereo Headphone Amplifier - Decora® panel with user level control

      Customizable Text

    • DS-SH1M

      Stereo Headphone Amplifier

      Customizable Text

    • RU-SH1

      Stereo Headphone Amplifier - RACK-UP Series

    • ST-SH2

      Stereo Headphone Amplifier - STICK-ON Series

    Related Products

    General Mounting Accessories
    • CP-1

      Single Cover Plate - White

    • CP-1G

      Single Cover Plate - Gray

    • CP-1S

      Single Cover Plate - Stainless Steel

    • CP-2

      Double Cover Plate - White

    • CP-2G

      Double Cover Plate - Gray

    • CP-2S

      Double Cover Plate - Stainless Steel

    • CP-3

      Triple Cover Plate - White

    • CP-3G

      Triple Cover Plate - Gray

    • CP-3S

      Triple Cover Plate - Stainless Steel

    • CP-4

      Quadruple Cover Plate - White

    • CP-4G

      Quadruple Cover Plate - Gray

    • CP-4S

      Quadruple Cover Plate - Stainless Steel

    • DC-1G

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-1W

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-2G

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-2W

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-3G

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-3W

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-4G

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-4W

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • RM-D3

      19" Rack Mount for 3 Decora® Modules

    • RM-D9

      19" Rack Mount for 9 Decora® Modules

    • SMB-1G

      Surface Mount Boxes for Decora® Remote Controls and Panels

    • SMB-1W

      Surface Mount Boxes for Decora® Remote Controls and Panels

    • SMB-2G

      Surface Mount Boxes for Decora® Remote Controls and Panels