Stereo Headphone Amplifier - STICK-ON Series

  • Stereophonic Headphone Amplifier
  • Provision for External Stereo Level Control
  • Balanced or Unbalanced Input
  • Bridge a Line and Feed Headsets
  • Amplifier To Drive High or Low Impedance Headsets
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)


    The ST-SH2 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. For fixed level installations not requiring user volume control, the ST-SH2 is wired to the audio source and to a headphone jack. Frequently, it is desirable to mount a volume knob by the headphone jack. The LEVEL ADJUST terminals (L) and (R) may be wired to the respective wipers of a stereo 10 kΩ potentiometer to provide volume adjustment. It is recommended that the ST-SH2 be located less than 39 in. (1 m) from the jack and volume control.

    The exceptional low noise (better than 100 dB below operating level), low distortion, audio clarity and excellent crosstalk performance makes this module ideally suited to a wide variety of demanding audio applications. Use this module in conjunction with other RDL® modules as part of a high quality, flexible audio/ video system.


    Inputs (2):10 kΩ balanced or unbalanced, bridging
    Input Signal:-20 dBu (-22 dBV) to +6 dBu (for normal output level: +4 dBu, 100 Ω)
    -10 dBu to +16 dBu (for 250 mW, 8 Ω output)
    Output Load Impedance:8 Ω to 5 kΩ (drives low or high impedance headphones)
    Output Signal (normal rated):+4 dBu into 100 Ω
    Output Signal (maximum):250 mW into 8 Ω, 20 Vp-p into 2 kΩ
    THD+N:< 0.005% (0.0015% typical @ 1 kHz)
    Frequency Response:20 Hz to 40 kHz (± 0.25 dB)
    Noise: 115 dB
    Gain:Adjustable from -2 to 24 dB
    CMRR:> 50 dB at 100 Hz
    Crosstalk:< -65 dB (10 Hz to 20 kHz);
    < -80 dB @ 1 kHz
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 200 mA
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.205 lbs.
    WEEE weight:0.15 lbs.
    Tariff code:8543.70.9860

    Related Products

    Headphone Amplifiers
    • D-SH1

      Stereo Headphone Amplifier - Decora® panel with user level control

      Customizable Text

    • D-SH1M

      Stereo Headphone Amplifier

      Customizable Text

    • DS-SH1

      Stereo Headphone Amplifier - Decora® panel with user level control

      Customizable Text

    • DS-SH1M

      Stereo Headphone Amplifier

      Customizable Text

    Related Products

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    TX™ Mounting Accessories
    • MB-1

      Mounting Kit - RU, ST and TX Series

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    STICK-ON® Mounting Accessories
    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • SMK-12

      STICK-ON Mounting Plate

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules




    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican4.04 KBDXF
    Panel Diagram - EndAmerican3.83 KBDXF
    Panel Diagram - FrontAmerican63.03 KBDXF
    Panel Diagram - EndMetric3.92 KBDXF
    Panel Diagram - FrontMetric64.75 KBDXF
    High Res ImagesFormat
    Declaration of Conformity


    Related Products

    • AMS-10KA

      10K Audio Taper Pot & Knob Assembly - Fits all AMS mounts

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online