RDL®

ST-DA3

Line Level Distribution Amplifier - 1x3

SKU: ST-DA3
  • Audio Distribution with up to 3 Outputs
  • Balanced or Unbalanced Input and Outputs
  • Bridge an Audio Line for Local Distribution
  • Distribution with Impedance Conversion
  • Distribution with Gain or Loss
  • Inputs and Outputs RF-Protected
  • 1×3 Mono or Use Two Units for Stereo
  • RDL® SupplyFlex™ Power Input Configuration
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3's wideband circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for which RDL products are known.

    The ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the PWR minus terminal and any module ground, the module power becomes ground-referenced.

    Specifications

    Input:20 kΩ balanced or unbalanced
    Input Signal:-15 dBV to +21 dBu (for +4 dBu output)
    Maximum Input Level:+24 dBu
    Outputs (3):150 Ω balanced or 75 Ω unbalanced

    Output Signal:
    Balanced:+4 dBu nominal balanced;
    Unbalanced:6 dB below balanced line level
    Maximum Output Level:+25 dBu
    Frequency Response:10 Hz to 100 kHz (± 0.05 dB)
    THD+N:< 0.002% (unity gain)
    IMD:< 0.003% (unity gain)
    Noise below +4 dBu:< -98 dB (unity gain)
    Headroom:> 20 dB (above +4 dBu)
    Gain:Unity ± 17 dB (adjustable)
    CMRR:> 60 dB (50 Hz to 120 Hz)
    Power Requirement:GROUND-REFERENCED or FLOATING, 24 Vdc @ 70 mA
    Ambient Operating Environment:0° C to 55° C
    Package Type:Cardboard Box
    Tariff code:8543.70.9860
    WEEE weight:0.145 lbs.
    Shipping Weight:0.2 lbs.
    Package Dimensions:2 x 2 x 4 in.

    Related Products

    Distribution
    • EZ-ADA4

      Stereo Audio Distribution Amplifier - 1X4

    • Audio Distribution Amplifier

      RU-ADA4D

      Audio Distribution Amplifier

    • RU-ADA8D

      Audio Distribution Amplifier

    • RU-MLD4

      Microphone / Line Distribution Amplifier - 1x4

    • RU-UDA4

      Stereo Audio Distribution Amplifier - 2x4 - RCA jacks

    Distribution
    • FP-AVDA4

      Stereo Audio/Video Distribution Amplifier - 1x4 - RCA Jacks

    Related Products

    STICK-ON® Mounting Accessories
    • SMK-12

      STICK-ON Mounting Plate

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    Dimensions

    ST-DA3

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsFormat
    Engineering Functional BlockAmericanDXF
    Panel Diagram - EndAmericanDXF
    Panel Diagram - FrontAmericanDXF
    Panel Diagram - EndMetricDXF
    Panel Diagram - FrontMetricDXF
    High Res ImagesFormat
    st-da3.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink