RDL®

ST-MA2

2 W Mono Audio Amplifier with Muting - 8 Ω

SKU: ST-MA2
  • Single-Speaker Monitor Amplifier
  • Conferencing Monitor Amp
  • Monitor Amp with Muting and Externally Actuated Attenuation Steps
  • Fast, Silent Audio Switching
  • Multiple Control Inputs
  • Adjustable Gain
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The ST-MA2 is a compact audio monitor amplifier with control inputs to mute or reduce the gain of its output. This module may be used in conjunction with other RDL® modules to configure automatic mixing systems or may be used alone as a single-speaker monitor amplifier. The ST-MA2 is typically used to drive a small tabletop or overhead monitor speaker in a conference room, boardroom, courtroom, public forum panel or similar installation. The ST-MA2 is ideally suited for use in automatic mixing systems due to its control inputs.

    The line-level input may be wired balanced or unbalanced. The audio output will drive standard speakers from 4 to 45 Ω. Normal gain is preset by means of a trimmer on the module.

    For tabletop installations, use the ST-MA2 with the WDG1 and RU-SP1.

    Specifications

    Input Impedance:20 kΩ Balanced or Unbalanced Bridging
    Input Level:-10 dBV minimum for 2 Watts RMS output
    Output Impedance:8 Ω (will drive 4 Ω loads)
    Output Power:1.75 Watts RMS Continuous; 2 Watts RMS max.
    THD+N:< 0.5%
    Bandwidth:45 Hz to 14 kHz
    CMRR:> 60 dB (50 Hz to 120 Hz)
    Residual Noise:< -80 dB (below 2 Watts RMS)
    Switching Time:< 50 us
    Attenuation (Muted):> 90 dB (1 kHz),
    > 85 dB (300 Hz to 3 kHz)
    > 75 dB (20 Hz to 20 kHz)
    Selectable Attenuation:3 dB or 6 dB, each setting individually selectable using two independent inputs (connect to ground to activate, 0.3 mA)
    Ambient Operating Environment:0° C to 40° C
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 200 mA for rated output (220 mA @ 2 Watts RMS)
    Package Type:Cardboard Box
    WEEE weight:0.145 lbs.
    Shipping Weight:0.195 lbs.
    Tariff code:8543.70.9860
    Package Dimensions:2 x 2 x 4 in.

    Related Products

    Processing
    • ST-GSP1

      Gated Speech Preamplifier - Microphone to Line

    Power Amplifiers
    • ST-PA2

      2 W Mono Audio Amplifier - 8 Ω

    • Compact Audio Amplifier

      ST-PA6

      6 W Mono Audio Amplifier - 8 Ω

    Microphone Products
    • A compact high quality microphone preamplifier

      STM-1

      Microphone Preamplifier - 50 dB Gain

    • Microphone Preamplifier

      STM-2

      Adjustable Gain Microphone Preamplifier - 35 to 65 dB Gain

    • STM-2X

      Switched Microphone Preamplifier - 35 to 65 dB Gain

    • STM-3

      High Gain Microphone Preamplifier - 45 to 75 dB Gain

    Related Products

    STICK-ON® Mounting Accessories
    • SMK-12

      STICK-ON Mounting Plate

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    Dimensions

    ST-MA2

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsFormat
    Engineering Functional BlockAmericanDXF
    Panel Diagram - EndAmericanDXF
    Panel Diagram - FrontAmericanDXF
    Panel Diagram - EndMetricDXF
    Panel Diagram - FrontMetricDXF
    High Res ImagesFormat
    st-ma2.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink