Voice-Over / Paging Module - Manual
SKU: ST-VP1
- High-Quality Voice-Over Mixing
- Noiseless Paging
- Single Input Adapted for Paging or Voice-Over
- Selectable Fade-Under or Hard-Cut
- Adjustable Fade DEPTH and RATE
- Soft Audio Switching
Recommended Power Supply ( Not Included ) | |
---|---|
PS-24AS (USA) | PS-24AX (International) |
The ST-VP1 is intended for voice-over paging with user adjusted and controlled FADE or CUT between two input sources. This unit is also perfect for voice-overs where precise and consistent fade levels are required. Automatic operation can be achieved when used in conjuction with RDL´s® ST-ACR products.
Specifications
Inputs (2): | Balanced line level (or unbalanced) |
Input Impedance: | 20 kΩ |
Input Signal Range: | -20 dBu to +18 dBu |
Output: | +4 dBu balanced (nominal) |
Gain: | Adjustable using multiturn potentiometer |
THD+N: | < 0.01% (20 Hz to 20 kHz, no compression) |
Frequency Response: | 20 Hz to 20 kHz (± 1 dB) |
Noise: | < -70 dB |
Indicators (2): | 1 LED indicating proper music level 1 LED indicating proper voice level |
AGC/Compressor: | 18 dB range; 6 dB compression at normal input level |
Attack Time: | 25 ms |
Release Time: | 2.5 seconds |
Voice Trigger Level: | 24 dB below operating level |
Music Fade Depth: | Adjustable 0 dB to −25 dB, or off |
Music Recovery Delay: | Adjustable 2 seconds to 4 seconds |
Ambient Operating Environment: | 0° C to 55° C |
Power Requirement: | GROUND-REFERENCED, 24 Vdc @ 35 mA |
Package Type: | Cardboard Box |
Tariff code: | 8543.70.9860 |
WEEE weight: | 0.145 lbs. |
Shipping Weight: | 0.2 lbs. |
Package Dimensions: | 2 x 2 x 4 in. |
Dimensions

Downloads
Documents | Format |
---|---|
Datasheet |
CAD Files | Units | Format |
---|---|---|
Engineering Functional Block | American | DXF |
Panel Diagram - End | American | DXF |
Panel Diagram - Front | American | DXF |
Panel Diagram - End | Metric | DXF |
Panel Diagram - Front | Metric | DXF |
High Res Images | Format |
---|---|
st-vp1.zip | TIF |
Declaration of Conformity |
---|
Download |
Where To Buy
Direct Dealer Program
Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:
- Must be an A/V contractor, sound contractor or system integrator
- Must possess a current resale certificate for your state
Where To Buy
Company | Address | Phone | Link |
---|
Authorized Distributor | Link |
---|---|
State name | View |