RDL®

STM-LDA3

Studio Quality Microphone Preamplifier with phantom - 3 line outputs

SKU: STM-LDA3
  • Studio-Quality Microphone Preamplification
  • Three Distributed Line-Level Outputs
  • Low-Noise and Low-Distortion Performance
  • Selectable Filtered Phantom Voltage
  • Adjustable Gain up to 60 dB
  • RDL’s® Exclusive Dual-LED VU Metering
  • Versatility of STICK-ON® Compactness
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The STM-LDA3 is designed for use in quality commercial sound, broadcast and recording applications. The 1.2 kΩ balanced input accepts a wide variety of microphone input levels without loading professional low-impedance microphones. A multi-turn gain trimmer allows precise output level adjustment. The output signal is available on three separate balanced line level outputs. Each output may be connected balanced or unbalanced.

    RDL's exclusive low-noise discrete preamplifier circuitry produces studio-quality low-noise performance in an economical preamplifier. Dynamic or condenser microphones may be used with the STM-LDA3. Standard 24V phantom is supplied to the input when the supply voltage is connected to the PHM terminal. Optimum operating level is set using RDL's unique dual-LED VU meter, located adjacent to the terminal block. A green LED illuminates at 15 dB below a +4 dBu output. The intensity of the green LED progresses from minimum to full intensity at +4 dBu. The adjacent red LED illuminates when the operating level exceeds +4. This makes the STM-LDA3 easy to set up without any external test equipment, and operating levels may be monitored at the module.

    Specifications

    Input:1.2 kΩ balanced
    Outputs (3):+4 dBu, 150 Ω balanced
    Gain:40 to 60 dB (25 turn adjustable)
    Frequency Response:30 Hz to 20 kHz (± 0.2 dB)
    THD+N:< 0.1%
    IMD:< 0.1%
    Noise:< -70 dB (below +4 dBu @ 60 dB gain - wideband)
    < -80 dB (below +4 dBu @ 50 dB gain - wideband)
    Equivalent Input Noise:< -130 dB (gain + residual noise below +4 dBu)
    Headroom:> 20 dB (above +4 dBu)
    CMRR:> 60 dB (100 Hz to 5 kHz)
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 40 mA
    Package Type:Cardboard Box
    WEEE weight:0.145 lbs.
    Shipping Weight:0.2 lbs.
    Tariff code:8543.70.9860
    Package Dimensions:2 x 2 x 4 in.

    Related Products

    Microphone Products
    • EZ-MPA1

      Microphone Preamplifier - Stereo Output with Compressors

    • EZ-MPA2

      Dual Microphone Preamplifier - Stereo Output with Compressors

    • FP-MP1

      Studio Quality Microphone Preamplifier with Phantom - Terminal block & XLR

    • HR-MP2

      Dual Microphone Preamplifier

    • HR-MP2A

      Dual Microphone Preamplifier

    • A compact high quality microphone preamplifier

      STM-1

      Microphone Preamplifier - 50 dB Gain

    Distribution
    • STM-DA3

      Microphone Level Distribution Amplifier - 1x3

    EMC
    • STS-RF1

      Shielded Chassis for STICK-ON module

    Related Products

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    STICK-ON® Mounting Accessories
    • SMK-12

      STICK-ON Mounting Plate

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    Dimensions

    STM-LDA3

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsFormat
    Engineering Functional BlockAmericanDXF
    Panel Diagram - FrontAmericanDXF
    Panel Diagram - EndAmericanDXF
    Panel Diagram - EndMetricDXF
    Panel Diagram - FrontMetricDXF
    High Res ImagesFormat
    stm-lda3.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink