Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

  • Single Unbalanced or Balanced 10 kΩ Audio Output
  • Output on Detachable Terminal Block or Phono Jack
  • +4 dBu Balanced Output; -10 dBV Unbalanced Output
  • Switch Selects which Pair (A, B or C) feeds the Output
  • Signal and Power Pair Pass-Through to LOOP OUT Jack
  • Passive Circuitry Does Not Require Power
  • Galvanic Isolation Provided for Both Outputs
  • Daisy-Chain with Additional Format-A Receivers
  • Description

    The TX-TPR6A is a single-pair audio receiving module compatible with RDL Format-A twisted pair products. A front-panel switch set during installation determines which of the three FORMAT-A pairs feeds the module output. The audio signal received from the selected pair of the RJ45 INPUT jack feeds the -10 dBV unbalanced RCA phono jack output and the +4 dBu balanced detachable terminal block output. A bridging transformer provides isolation between the twisted pair cable and the audio output.

    The TX-TPR6A is a single-pair receiver, bridging the input signal from the cable pair set on the front-panel switch during installation. This module receives only one cable pair, therefore a LOOP OUT RJ45 jack is provided for connecting additional Format-A receivers. Two other single-pair receivers may be chained to the LOOP OUT jack, or a single two-pair receiver may be connected. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. All three audio pairs are fed through from the INPUT jack to the LOOP OUT jack.

    The TX-TPR6A is a passive module that does not require power to operate. Power present on a cable connected to one RJ45 jack is passed through to the modules connected to the other RJ45 jack.


    Input:RDL TP Format-A
    Input Connection:RJ45
    Format-A Signal Pair Used:Switch-selectable A, B, or C
    Format-A Output:RJ45 LOOP OUT
    Outputs (2):10 kΩ Balanced; 3 kΩ Unbalanced
    Output Connection:Detachable Terminal Block (Bal); RCA (Unbal)
    Output Level:+4 dBu Bal., +22 dBu Max; -10 dBV Unbal.
    Frequency Response:20 Hz to 20 kHz (± 0.75 dB)
    THD+N:< 0.1% (1 kHz); < 0.5% (50 Hz to 20 kHz)
    Noise below +4 dBu:< 90 dB
    Headroom above +4 dBu:> 18 dB
    CMRR:> 90 dB (50 Hz to 150 Hz)
    Ambient Operating Environment:0° C to 50° C
    Power Requirement:Passive
    Dimensions:3.17" (8.05 cm) W; 1.76" (4.47 cm) H; 2.06" (5.23 cm) D 3.17 x 1.76 x 2.06 in
    Package Type:Cardboard Box
    Tariff code:8543.70.9860
    WEEE weight:0.365 lbs.
    Shipping Weight:0.415 lbs.
    Package Dimensions:2 x 2 x 4 in.

    Related Products

    Power Inserters / Breakout
    • FP-TP4PW

      Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

    • RU-TP4PW

      Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

    Format-A® Mixers
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Format-A® Distributors
    • RU-TPDA

      Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

    • RU-TPS4A

      Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

    Format-A® Receivers
    • Format-A twisted pair receiver to balanced line output


      Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

    • Format-A Line Level Receiver


      Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

    Format-A® Senders
    • TX-TPS1A

      Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input

    • TX-TPS3A

      Active Three-Pair Sender - Twisted Pair Format-A - Balanced line inputs

    • TX-TPS6A

      Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input

    Related Products

    • RC-HPS1

      10.4" Rack Mount for Desktop Power Supply and TX Module

    Pole Mounting Accessories
    General Mounting Accessories
    • MB-1

      Mounting Kit - RU, ST and TX Series

    • MB-2

      Mounting Kit - RU and TX Series

    • MB-3

      Kit to Mount ST, TX Series Modules on FP Panel

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    DIN Rail Mounting Accessories
    TX™ Mounting Accessories
    • TX-HRA3

      10.4" Rack Mount for 3 TX Series Products

    • TX-RA5

      TX Series 19" Racking System - 5 modules 1RU

    • TX-RRB1

      Rear rack rail mounting kit for any TX series module




    CAD FilesUnitsFormat
    Engineering Functional BlockAmericanDXF
    Panel Diagram - FrontAmericanDXF
    Panel Diagram - FrontMetricDXF
    High Res ImagesFormat
    Declaration of Conformity

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online