RDL®

Menu
0 $0.00

Format-A®

Home / Format-A® / Page 3

  • DS-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo RCA out

    • Balanced Mic or Line Level XLR Output
    • Switch-Selectable Output Level on Rear Panel
    • Two Unbalanced -10 dBV Phono Jack Audio Outputs
    • XLR From Pair A; L From Pair B; R From Pair C
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Utilizes All Three Format-A Pairs
    • Studio-Quality Precision Active Balanced Circuitry

  • DS-TPRX3A

    Three Input Format-A Source Selector

    • Remote Selection from 3 Sources that Correspond to 3 Format-A Pairs
    • Single-Button Selection for Each Source
    • LED Indication
    • Line-Level Balanced Output on Detachable Terminal Block
    • Display is Bright During Adjustment
    • Display Dims After Adjustment
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Studio-Quality Precision Active Balanced Circuitry
    • All-Metal Construction
    • Available in Stainless Steel, Black and White

  • DS-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone input w pha

    • Balanced Microphone XLR Input with Phantom
    • Switch-Selectable Mic Gain on Rear Panel
    • Switch Selects which RJ45 Pair (A, B or C) is Fed
    • Signal and Power Pair Pass-Through on RJ45 Jacks
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Daisy-Chain with Single-Pair or Two-Pair Senders
    • Studio-Quality Precision Active Balanced Circuitry

  • DS-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - Stainless - Stereo RCA jack inputs

    • Two Unbalanced -10 dBV Phono Jack Audio Inputs
    • Left (L) Input Feeds Pair B; Right (R) Feeds Pair C
    • Signal and Power Pair Pass-Through on RJ45 Jacks
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Daisy-Chain with Single-Pair Senders
    • Studio-Quality Precision Active Balanced Circuitry

  • DS-TPS3A

    Active Three-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone & stereo

    • Balanced Microphone XLR Input with Phantom
    • Switch-Selectable Mic Gain on Rear Panel
    • Two Unbalanced -10 dBV Phono Jack Line Inputs
    • MIC Feeds Pair A; L Feeds Pair B; R Feeds Pair C
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Utilizes All Three Format-A Pairs
    • Studio-Quality Precision Active Balanced Circuitry

  • DS-TPS6A

    Passive Single-Pair Sender

    • Stereo Audio Input Combined to Mono Output
    • Input on Dual RCA Jacks
    • Switch Selects which RJ45 Pair (A, B or C) is Fed
    • Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
    • Passive Circuitry Does Not Require Power
    • Galvanic Isolation through a Studio-Quality Transformer
    • Daisy-Chain with Single-Pair or Two-Pair Format-A Senders

  • DS-TPS7A

    Passive Single-Pair Sender

    • Stereo Audio Input Combined to Mono Output
    • Input on Mini-Jack
    • Switch Selects which RJ45 Pair (A, B or C) is Fed
    • Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
    • Passive Circuitry Does Not Require Power
    • Galvanic Isolation through a Studio-Quality Transformer
    • Daisy-Chain with Single-Pair or Two-Pair Format-A Senders

  • DS-TPSL1A

    Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

    • Stereo Audio Input Combined to Mono Output
    • Input on Dual RCA Jacks or Mini-Jack
    • Switch Selects which RJ45 Pair (A, B or C) is Fed
    • Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Daisy-Chain with Single-Pair or Two-Pair Format-A Senders
    • Studio-Quality Precision Active Balanced Circuitry

  • DS-TPSL2A

    Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In

    • Balanced Microphone XLR Input with Phantom
    • Switch-Selectable Mic Gain on Rear Panel
    • Two Unbalanced -10 dBV Phono Jack Line Inputs
    • MIC Feeds Pair A; L and R Summed to Mono Feed Pair B
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Utilizes Two Format-A Pairs
    • Studio-Quality Precision Active Balanced Circuitry

  • DS-TPSM2A

    Active Two-Pair Sender - Dual Microphone Preamplifier - Twisted Pair Format-A

      • Two Balanced Microphone XLR Inputs with P48 Phantom
      • Switch-Selectable Mic Gain on Rear Panel
      • Gain Selector Provides Fixed 40 dB, 60 dB or Automatic
      • Automatic Gain: 60 dB for Dynamic Mics; 40 dB for Condenser Mics
      • Output Pair Selector to Feed RJ45 Pair (A, B or C) for Each Preamplifier
      • Signal and Power Pairs Pass Through RJ45 Connectors
      • Module is Remotely Powered Through RJ45 Connector
      • Utilizes Two Format-A Pairs
      • Daisy-Chain with a Single-Pair Format-A Sender
      • Studio-Quality Precision Active Balanced Circuitry

  • FP-TPX3A

    Format-A Twisted Pair Remote Controlled Mixer

      • 3-Channel Remote-Controlled Audio Mixer
      • VCA Level Control for Each Input Pair
      • Format-A Twisted Pair Inputs
      • One Detachable Balanced and Two RCA Unbalanced Mono Outputs
      • Twisted Pair Interconnection to Remote Control
      • Directly Controlled by RDL Remote Controls with 2 or 3 channels
      • Local Input Available if Only Two Twisted Pair Inputs Used
      • Paging Source May Connect to Local Input
      • Front-Panel Gain Trim Matches Active or Passive Format-A Senders
      • Dual-LED VU Meter Displays Mixer Output Level
      • Audio Presence Detector Controls Open-Collector Outputs
      • Detector Outputs Intended to Enable Power Amplifiers or System Power
      • Energy Savings Possible Using Detector Outputs
      • Selectable 10 or 20 Minute Detector Release Delay

  • RU-BNF

    Format-A Bi-Directional Network Interface

    • Converts RDL Format-A and Aux Source to Four Dante Network Channels
    • Easy Installation with Format-A Connections on RJ45 through CATx Cable
    • Format-A Audio Sources from Pairs A, B and C Converted to Dante
    • Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
    • Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input
    • Signal LEDs Indicate Audio for Each of the Three Audio Source Format-A Pairs
    • Converts Four Dante Network Audio Signals to RDL Format-A and Aux
    • Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
    • Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
    • Format-A Pairs are Distributed to Three Separate Format-A Output Jacks
    • Signal LEDs Indicate Audio for Each of the Four Received Dante Audio Signals
    • External 24 Vdc Supply Powers All Connected Format-A Modules through RJ45 Jacks
    • PoE (RU-BNFP) Powers Format-A Input and Primary Format-A Output RJ45 Jacks
    • High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
    • Legendary RDL Analog Filtering Enhances Superb Audio Performance
    • LED Indicators Show Network Sync Status
    • Normal or Hot-Standby Operation from PoE (Model RU-BNFP)
    • Compatible with Wide Array of RDL Format-A Active and Passive Senders and Receivers
    • Equipped for Rack Mounting or Surface Mounting

  • RU-BNFP

    Format-A Bi-Directional Network Interface

      • Converts RDL Format-A and Aux Source to Four Dante Network Channels
      • Easy Installation with Format-A Connections on RJ45 through CATx Cable
      • Format-A Audio Sources from Pairs A, B and C Converted to Dante
      • Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
      • Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input
      • Signal LEDs Indicate Audio for Each of the Three Audio Source Format-A Pairs
      • Converts Four Dante Network Audio Signals to RDL Format-A and Aux
      • Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
      • Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
      • Format-A Pairs are Distributed to Three Separate Format-A Output Jacks
      • Signal LEDs Indicate Audio for Each of the Four Received Dante Audio Signals
      • External 24 Vdc Supply Powers All Connected Format-A Modules through RJ45 Jacks
      • PoE (RU-BNFP) Powers Format-A Input and Primary Format-A Output RJ45 Jacks
      • High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
      • Legendary RDL Analog Filtering Enhances Superb Audio Performance
      • LED Indicators Show Network Sync Status
      • Normal or Hot-Standby Operation from PoE (Model RU-BNFP)
      • Compatible with Wide Array of RDL Format-A Active and Passive Senders and Receivers
      • Equipped for Rack Mounting or Surface Mounting

  • RU-FN

    Format-A to Network Interface

      • Converts RDL Format-A and Aux Source to Four Dante Network Channels
      • Easy Installation with Format-A Connections on RJ45 through CATx Cable
      • Format-A Audio Sources from Pairs A, B and C Converted to Dante
      • Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
      • Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input
      • Signal LEDs Indicate Audio for Each of the Three Format-A Pairs
      • High Resolution 24 Bit Analog to Digital Conversion
      • Legendary RDL Analog Filtering Enhances Superb Audio Performance
      • Powers Remote Format-A Senders through Format-A Input Jack
      • LED Indicators Show Network Sync Status
      • Normal or Hot-Standby Operation from PoE (Model RU-FNP)
      • Compatible with Wide Array of RDL Format-A Active and Passive Senders
      • Equipped for Rack Mounting or Surface Mounting

  • RU-FNP

    Format-A to Network Interface

      • Converts RDL Format-A and Aux Source to Four Dante Network Channels
      • Easy Installation with Format-A Connections on RJ45 through CATx Cable
      • Format-A Audio Sources from Pairs A, B and C Converted to Dante
      • Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
      • Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input
      • Signal LEDs Indicate Audio for Each of the Three Format-A Pairs
      • High Resolution 24 Bit Analog to Digital Conversion
      • Legendary RDL Analog Filtering Enhances Superb Audio Performance
      • Powers Remote Format-A Senders through Format-A Input Jack
      • LED Indicators Show Network Sync Status
      • Normal or Hot-Standby Operation from PoE (Model RU-FNP)
      • Compatible with Wide Array of RDL Format-A Active and Passive Senders
      • Equipped for Rack Mounting or Surface Mounting

  • RU-NFD

    Network to Format-A Interface/Distributor

      • Converts Four Dante Network Audio Signals to RDL Format-A and Aux
      • Easy Installation with Format-A Connections on RJ45 through CATx Cable
      • Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
      • Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
      • Format-A Pairs are Distributed to Three Separate Format-A Output Jacks
      • Signal LEDs Indicate Audio for Each of the Four Received Network Signal Channels
      • High Resolution 24 Bit Digital to Analog Conversion
      • Legendary RDL Analog Filtering Enhances Superb Audio Performance
      • Powers Remote Format-A Receivers through Primary Output Jack
      • External 24 Vdc Supply Powers Format-A Receivers through All Output Jacks
      • LED Indicators Show Network Sync Status
      • Outputs Mute when Digital Audio Inputs are Inactive
      • Normal or Hot-Standby Operation from PoE (Model RU-NFDP)
      • Compatible with Wide Array of RDL Format-A Active and Passive Receivers
      • Equipped for Rack Mounting or Surface Mounting
  • Main menu
Shopping cart close