ST-UMX3
3x1 Universal Audio Mixer - 3 microphone or line inputs x 1 microphone or line output
- Audio Mixing with Up To Three Inputs
- Switch-Selectable Mic or Line Inputs
- Switch-Selectable Mic or Line Output
- Add Additional Microphone or Line Level Inputs to an Existing Mixer
- Combine Signals of Different Level, Impedance, or Balanced /Unbalanced Configuration
ST-VCA3
Voltage Controlled Amplifier
- Audio Level Control from a DC Voltage
- Audio Level Remote Control
- Two Wire with Shield or Three Wire Control
- VCA with Microphone or Line Level Input
- VCA with Line-Level Output
- VCA with LED Metering of Operating Level
ST-VOX1
Voice Operated Relay
- Switching Controlled by Voice Signal
- Switching from Mic or Line Level Signals
- Precise Threshold Adjustment
- DPDT Switching Contacts
- Open-Collector SLAVE Output
ST-VP1
Voice-Over / Paging Module - Manual
- High-Quality Voice-Over Mixing
- Noiseless Paging
- Single Input Adapted for Paging or Voice-Over
- Selectable Fade-Under or Hard-Cut
- Adjustable Fade DEPTH and RATE
- Soft Audio Switching
ST-VP2
Automatic Ducking Module
- Fully AUTOMATIC Voice-Over Mixing
- Noiseless Paging
- Adjustable Fade Depth
- Setting to Fade Music Fully Off
- Adjustable Recovery Rate
- Built-in AGC Compressor on Music Input
STA-1
Dual Balanced/Unbalanced Line Amplifier -12 to 20 dB Gain
- Up to 20 dB Gain in an Audio Line
- Conversion from Balanced to Unbalanced
- Conversion from Unbalanced to Balanced
- Conversion from High to Low Impedance
- Conversion from Low to High Impedance
- Bridge an Audio Line Feed
- Precisely Match Audio Levels
STA-1M
Audio Line Amplifier - Mono: -14 to 14 dB Gain
- Single-Channel Audio Line Amplifier
- Balanced or Unbalanced Inputs and Outputs
- Bridge a Line to Avoid Loading
- High to Low Impedance Conversion
- Low to High Impedance Conversion
- Instrumentation Input to Isolate Ground Loops
- Precisely Match Audio Levels
- RDL® SupplyFlex™ Power Input Configuration
STA-2A
Dual High Gain Line Amplifiers
- Up to 24 dB Gain in Audio Lines
- Conversion between Unbalanced and Balanced
- Conversion between High and Low Impedance
- Low-Impedance, High-Current Line Drivers
- Dual-Channel Line-Level Preamplifiers
- High Gain, High Output, High Performance
- RDL® SupplyFlex™ Power Input Configuration
STD 150
Passive Audio Divider/Combiner - 150 Ω
- 150 Ω Operation
- Combine Audio Signals to a Single Output
- Filter RF from an Audio Line
- Combine Stereo Signals
- Feed a Mono Signal to Stereo Inputs
- Combine Multiple Mics to a Single Amp
- Compactness of RDL STICK-ONs®
STD 600
Passive Audio Divider/Combiner - 600 Ω
- 600 Ω Operation
- Combine Audio Signals to a Single Output
- Filter RF from an Audio Line
- Combine Stereo Signals
- Feed a Mono Signal to Stereo Inputs
- Combine Multiple Mics to a Single Amp
- Compactness of RDL STICK-ONs®
STD-10K
Passive Audio Divider/Combiner - 10 kΩ
- 10 kΩ Operation
- Combine Audio Signals to a Single Output
- Filter RF from an Audio Line
- Combine Stereo Signals
- Feed a Mono Signal to Stereo Inputs
- Combine Multiple Mics to a Single Amp
- Compactness of RDL STICK-ONs®
STM-1
Microphone Preamplifier - 50 dB Gain
- High or Low Impedance Input Mic Preamp
- Fixed 50 dB Gain for Consistency
- Balanced or Unbalanced Output
- Phantom Capability
- RF-Filtered Inputs and Outputs
- Excellent Performance
- STICK-ON® Convenience
STM-2
Adjustable Gain Microphone Preamplifier - 35 to 65 dB Gain
- Low-Noise Mic Preamp
- Adjustable Output Level
- High or Low Impedance Mic Inputs
- Mic Input to 2 Line Outputs
- Two Balanced or Unbalanced Outputs
- Phantom Capability
- RF-Filtered Inputs
STM-2X
Switched Microphone Preamplifier - 35 to 65 dB Gain
- Quiet Switching of Condenser Microphone
- Remote Microphone Soft-Switching
- Switch a Mic-Level Source to a Mic or Line Level Output
- Remote Toggle Switch or Push-to-Talk Button
- Adjustable Preset Gain on Microphone Source
STM-3
High Gain Microphone Preamplifier - 45 to 75 dB Gain
- Low-Noise, High-Gain, Mic Preamp
- Adjustable Output Levels
- High or Low Impedance Mic Inputs
- Mic Input to Line Outputs
- Two Balanced or Unbalanced Outputs
- Phantom Capability
- RF-Filtered Inputs
STM-DA3
Microphone Level Distribution Amplifier - 1x3
- Feed 1 Microphone to 3 Microphone Inputs
- Electrical and Audio Isolation
- Studio Quality Low-Noise, Low-Distortion Performance
- Excellent Phase Response
- Versatility of STICK-ON® Compactness
Sign inShopping cart close
ST-UMX3
3x1 Universal Audio Mixer - 3 microphone or line inputs x 1 microphone or line output
- Audio Mixing with Up To Three Inputs
- Switch-Selectable Mic or Line Inputs
- Switch-Selectable Mic or Line Output
- Add Additional Microphone or Line Level Inputs to an Existing Mixer
- Combine Signals of Different Level, Impedance, or Balanced /Unbalanced Configuration