RDL®

DB-BT1A

Wall-Mounted Bluetooth® Audio Format-A Interface

SKU: DB-BT1A
  • Bluetooth Audio Input for Installed Sound System
  • Intuitive Single Button Pairing with LED Status Indication
  • Special Software Not Required for Module Setup
  • Customize the Module ID Name and Programming Password through the Bluetooth Connection
  • Sends Received Bluetooth Audio to RDL Format-A Receivers
  • Mono Summed or Stereo Audio Input Mode is Switch-Selectable on Rear Panel
  • Rear-Panel Switch Selects which RJ45 Pair (A, B or C) is Fed in Mono Summed Mode
  • Daisy-Chain up to Three D SERIES-BT1A modules to One Format-A Receiver in Mono Mode
  • Remotely Powered through Twisted Pair Cable
  • Signal and Power Pair Pass-Through on RJ45 Jacks
How to Customize
Recommended Power Supply
PS-24AS (USA)PS-24AX (International)

Description

The D SERIES-BT1A modules are Bluetooth audio receiving modules compatible with RDL® Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled device, the module receives stereo audio from the Bluetooth source. The stereo signal is sent through two Format-A pairs to any RDL Format-A receiver. A stereo/mono switch set by the installer permits summed mono audio to be sent over one switch-selected pair to the Format-A receiver. If set for stereo operation, an additional Format-A source (set to Pair A) may be daisy chained with the D SERIES-BT1A to a three-pair Format-A receiver. If set for mono operation, up to three D SERIES-BT1A modules may be daisy chained to a single three-pair Format-A receiver. Connections between Format-A modules and Format-A receivers use standard CATx cable with RJ45 connectors. The D SERIES-BT1A modules are powered from the Format-A receiver. The installer can customize the module name and programming password through the Bluetooth connection using a smartphone, computer or tablet terminal program. These modules feature studio-quality circuits and analog filters to provide audio performance exceeding expectations from consumer interface technologies. High performance, simplicity of operation and efficiency of installation make RDL the best value in professional Bluetooth interfaces. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Radio Design Labs, Inc. is under license. Other trademarks and trade names are those of their respective owners. Recommended Stereo Format-A receiver: TX-TPR2A

Specifications

Output:RDL Format-A (RJ45)
Format-A Input:RJ45 LOOP IN
Format-A Signal Pair Used:A, B, or C (summed mono mode, rear-panel switch-selectable); B and C (stereo mode, pair A pass through)
Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
THD+N:< 0.1%
Noise below -20 dBFS:< -70 dB
Crosstalk (channel to channel):< 70 dB
Audio Operating Levels:-20 dBFS = +4 dBu (balanced), nominal
Ambient Operating Environment:0° C to 40° C
Power Requirement:24 Vdc @ 100 mA (through RJ45)
Dimensions:1.73" (4.39 cm) W; 4.11" (10.44 cm) H; 1.62" (4.11 cm) D
Package Type:Cardboard Box
Package Dimensions:3.625 x 4.625 x 2.125 in.
Shipping Weight:0.45 lb.
WEEE weight:0.29 lbs.
Tariff code:8543.70.9100

Related Products

Format-A® Distributors
  • RU-TPDA

    Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

  • RU-TPS4A

    Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

Format-A® Receivers
  • D-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output

    Customizable Text

  • D-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs

    Customizable Text

  • D-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs

    Customizable Text

  • DS-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR microphone/line outp

    Customizable Text

  • DS-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - Stereo RCA jack outputs

    Customizable Text

  • DS-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo RCA out

    Customizable Text

  • TX-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

  • TX-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

  • TX-TPR6A

    Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

Format-A® Senders
  • D-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

    Customizable Text

  • DB-BT1A

    Wall-Mounted Bluetooth® Audio Format-A Interface

    Customizable Text

  • DB-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - XLR microphone input with phantom

    Customizable Text

  • DS-BT1A

    Wall-Mounted Bluetooth® Audio Format-A Interface

    Customizable Text

  • DS-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone input w pha

    Customizable Text

  • DS-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - Stainless - Stereo RCA jack inputs

    Customizable Text

  • TX-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input

  • TX-TPS6A

    Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input

Power Inserters / Breakout
  • FP-TP4PW

    Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

  • RU-TP4PW

    Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

  • TX-TP1PW

    Power Inserter - Twisted Pair - 1 set of outputs - Signal loop-through

Related Products

General Mounting Accessories
  • CP-4S

    Quadruple Cover Plate - stainless steel

  • CP-4

    Quadruple Cover Plate - white

  • CP-4G

    Quadruple Cover Plate - gray

  • CP-3S

    Triple Cover Plate - stainless steel

  • CP-3G

    Triple Cover Plate - gray

  • CP-2S

    Double Cover Plate - stainless steel

  • CP-3

    Triple Cover Plate - white

  • CP-1S

    Single Cover Plate - stainless steel

  • DC-4W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-4G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-3G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-2G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-3W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-1W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-2W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-1G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • SMB-4G

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-3G

    Surface Mount Boxes for Decora® Remote Controls and Panels