RDL®

DB-TPSL1A

Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

SKU: DB-TPSL1A
  • Stereo Audio Input Combined to Mono Output
  • Input on Dual RCA Jacks or Mini-Jack
  • Switch Selects which RJ45 Pair (A, B or C) is Fed
  • Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
  • Remote Powering through Twisted Pair Cable
  • Fused Local Power Feeds all Connected Modules
  • Local Power Input on Terminal Block
  • Blue LED Indicates Module is Powered
  • Daisy-Chain with Single-Pair or Two-Pair Format-A Senders
  • Studio-Quality Precision Active Balanced Circuitry
  • How to Customize
    Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The -TPSL1A modules are single pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources.

    The –TPSL1A modules feature a stereo line input through a mini jack or two RCA phono jacks summed to mono. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. These modules drive only one cable pair, therefore they accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained with the -TPSL1A, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.

    The -TPSL1A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPSL1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.

    RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

    Specifications

    Input:10 kΩ unbalanced (left and right)
    Input Connection:Mini-jack or dual RCA phono jacks
    Input Level:-10 dBV
    Format-A Signal Pair Used:Switch-selectable A, B, or C
    Format-A Input:RJ45
    Output:RDL TP Format-A
    Output Connection:RJ45
    Frequency Response:20 Hz to 20 kHz (+/- 0.25 dB)
    THD+N:< 0.05% (20 Hz to 20 kHz)
    Noise: 18 dB
    Indicator:Power In
    Power Connections (2):Detachable terminal block; RJ45
    Power Requirement:24 Vdc @ 25 mA plus connected loads
    Dimensions:1.6" (4.06 cm) W; 4.11" (10.45 cm) H; 1.89" (4.8 cm) D
    Mounting Box Minimum Depth:2.4" (6.1 cm)
    Ambient Operating Environment:0° C to 55° C
    WEEE Weight:0.24 lbs
    WEEE Weight:0.385 lbs
    Shipping Weight:0.385 lbs

    Related Products

    Format-A® Receivers
    • D-TPR1A

      Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output

      Customizable Text

    • D-TPR2A

      Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs

      Customizable Text

    • D-TPR3A

      Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs

      Customizable Text

    • DS-TPR1A

      Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR microphone/line outp

      Customizable Text

    • DS-TPR2A

      Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - Stereo RCA jack outputs

      Customizable Text

    • DS-TPR3A

      Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo RCA out

      Customizable Text

    • TX-TPR1A

      Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

    • TX-TPR3A

      Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

    • TX-TPR6A

      Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

    Format-A® Senders
    • D-TPS1A

      Active Single-Pair Sender - Twisted Pair Format-A - XLR microphone input with phantom

      Customizable Text

    • D-TPS2A

      Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

      Customizable Text

    • D-TPSL1A

      Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

      Customizable Text

    • D-TPSL2A

      Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In

      Customizable Text

    • DB-TPS2A

      Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

      Customizable Text

    • DB-TPSL1A

      Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

      Customizable Text

    • DB-TPSL2A

      Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In

      Customizable Text

    • DS-TPS1A

      Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone input w pha

      Customizable Text

    • DS-TPS2A

      Active Two-Pair Sender - Twisted Pair Format-A - Stainless - Stereo RCA jack inputs

      Customizable Text

    • DS-TPSL1A

      Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

      Customizable Text

    • DS-TPSL2A

      Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In

      Customizable Text

    • TX-TPS1A

      Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input

    • TX-TPS6A

      Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input

    Power Inserters / Breakout
    • FP-TP4PW

      Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

    • RU-TP4PW

      Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

    • TX-TP1PW

      Power Inserter - Twisted Pair - 1 set of outputs - Signal loop-through

    Format-A® Mixers
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Mixing
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Format-A® Distributors
    • RU-TPDA

      Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

    • RU-TPS4A

      Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

    Related Products

    General Mounting Accessories
    • SMB-4B

      Surface Mount Boxes for Decora® Remote Controls and Panels

    • SMB-3B

      Surface Mount Boxes for Decora® Remote Controls and Panels

    • SMB-2B

      Surface Mount Boxes for Decora® Remote Controls and Panels

    • SMB-1B

      Surface Mount Boxes for Decora® Remote Controls and Panels

    • CP-4B

      Quadruple Cover Plate - black

    • CP-3B

      Triple Cover Plate - Black

    • DC-2B

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-3B

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • DC-4B

      Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

    • CP-1B

      Single Cover Plate - Black