RDL®

RU-PA518

10 W Stereo / 18 W Mono Audio Amplifier - 8 Ω

SKU: RU-PA518
  • 9 W RMS per Channel Stereo into 4 Ω
  • 18 W RMS Mono into 8 Ω
  • Selectable Stereo or Bridged Mono
  • Selectable Built-In Peak Limiter
  • 1/3 Rack, High-Density Rack Mounting
  • Front-Panel Control for 2 Inputs
Recommended Power Supply ( Not Included )
PS-24V3A (USA)PS-24V3 (International)
Category:

Description

The RU-PA518 features two modes of operation: stereo and bridged mono. Depending on the mode of operation, the RU-PA518 can deliver from 5 to more than 18 watts of RMS power at the output. In stereo mode, each of the two inputs feeds its respective left or right output. Front-panel level controls set the gain for both left and right channels. When the rear-panel switch is set to the bridge mode, the two inputs (A and B) are mixed together and fed to the output. In either the stereo or mono mode, an internal audio peak limiter may be turned on using a rear panel switch.

Specifications

Inputs (2):Line level (+4 dBu nominal bal,
-10 dBV nominal unbalanced)
Input Impedance:20 kΩ balanced bridging, or 10 kΩ unbalanced
Input Connectors:Balanced on barrier block; Unbalanced on phono jack
Minimum Input Signal Levels:Balanced: -6 dBu for rated power
Unbalanced: -20 dBV for rated power
Maximum Input Signal Levels:Balanced: +20 dBu
Unbalanced: +6 dBV
Frequency Response:20 Hz to 40 kHz (±1 dB, stereo mode,8 Ω output @ 5 W RMS)
25 Hz to 40 kHz (±1 dB, stereo mode, 4 Ω output @ 9 W RMS)
25 Hz to 30 kHz (±1 dB, bridge mono mode, 8 Ω output @ 18 W RMS)
THD+N:< 0.05% below rated power (1 kHz)
< 0.1% below 18 W RMS (50 Hz to 20 kHz)
Noise:< -85 dB below rated output
CMRR:> 55 dB (50 Hz to 120 Hz)
Crosstalk:< -60 dB (stereo mode, 1 kHz)
Output Power:Stereo Mode: > 5 W RMS per channel Into 8 Ω
> 9 W RMS per channel into 4 Ω
Mono Mode: > 18 W RMS into 8 Ω
Ambient Operating Environment:0° C to 40° C; 20° C recommended
Dimensions:Height: 1.7 in. (4.3 cm), Width: 5.8 in (15.0 cm), Depth 8.0 in. (20.3 cm)
Power Requirement:GROUND-REFERENCED, 24 Vdc @ 1500 mA (RMS output) 1000 mA (Continuous music or voice)
Package Type:Cardboard Box
WEEE weight:1.475 lbs.
Shipping Weight:1.83 lbs.
Tariff code:8518.50.0000
Package Dimensions:9.5 x 7 x 2.25 in.

Related Products

Speakers and Active Speakers
  • D-SP1A

    2 Watt Decora-Style 8 Ohm Loudspeaker

  • DB-SP1A

    2 Watt Decora-Style 8 Ohm Loudspeaker

  • DG-SP1A

    2 Watt Decora-Style 8 Ohm Loudspeaker

  • DS-SP1A

    2 Watt Decora-Style 8 Ohm Loudspeaker

Power Amplifiers
  • EZ-MXA20

    20 W Stereo Audio Mixer-Amplifier with EQ - 8 Ω, with Power Supply

  • EZ-PA20

    20 W Stereo Audio Amplifier - 8 Ω, with Power Supply

  • RU-PA40D

    40 W Stereo Audio Amplifier with VCA - 8 Ω, with Power Supply

  • Mono 18W Amplifier

    ST-PA18

    18 W Mono Audio Amplifier - 8 Ω

  • ST-PA2

    2 W Mono Audio Amplifier - 8 Ω

  • Compact Audio Amplifier

    ST-PA6

    6 W Mono Audio Amplifier - 8 Ω

  • TX-PA40D

    40 W Stereo Audio Amplifier - 8 Ω, with Power Supply

Audio
  • FP-PA20

    20 W Mono Audio Amplifier - 8 Ω

  • FP-PA20A

    20 W Mono Audio Amplifier - 70 V or 100 V

  • FP-PA20B

    20 W Mono Audio Amplifier - 25 V

Related Products

Rack-Up® Mounting Accessories
  • RU-BR1

    Mounting Bracket for RACK-UP Series

  • RU-HRA1

    10.4" Rack Mount for 1 RACK-UP Series Product

  • RU-RA3R

    Rack adapter for RACK-UP series

  • RU-SMA1

    RACK-UP Mounting Plate - Mounts any RACK-UP module in a cabinet or other flat surface

  • UC-1R

    RACK-UP Enclosure

  • UC-2R

    Double Wide RACK-UP Enclosure

  • WDG1R

    Table Top "Wedge" Chassis

General Wiring Accessories
  • RC-1UR

    19" Universal Rack Chassis

DIN Rail Mounting Accessories

Dimensions

RU-PA518

Downloads

DocumentsFormat
Datasheet PDF
CAD FilesUnitsFormat
Engineering Functional Block American DXF
Panel Diagram - Front American DXF
Panel Diagram - Rear American DXF
Panel Diagram - Front Metric DXF
Panel Diagram - Rear Metric DXF
High Res ImagesFormat
ru-pa518.zip TIF
Declaration of Conformity
Download

Where To Buy

Direct Dealer Program

Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator
  • Must possess a current resale certificate for your state
Click here to submit a new direct dealer account inquiry

Where To Buy

Company Address Phone Link
Authorized Distributor Link
State name View
You're viewing: RU-PA518
Add to cart
Shopping cart close