RDL®

ST-SX4

Unbalanced Audio Switcher - 4x1

SKU: ST-SX4
  • Select 1 of 4 Unbalanced Audio Sources
  • Audio Selection from Remote Location
  • Remote Switching from Single Control Pair
  • All Solid-State Audio Switching
  • Slave Capability for Stereo Switching
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The ST-SX4 accepts up to four unbalanced audio sources. Any of these sources may be selected to feed the output, or all sources may be switched off. The output from the ST-SX4 is unbalanced. Control of the module is accomplished through a single input terminal. Connection of a specified resistance between the CTRL input and ground causes the desired input to be switched on. The necessary external resistors are supplied with the ST-SX4. The ST-SX4 may be remote controlled using the D SERIES-RC4ST remote control.

    Specifications

      322 kΩ
      4None
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 45 mA
    Input SelectedResistance Value
    Control Input:Single terminal to be connected to ground terminal to select desired channel.
    Control Input Resistance:10 kΩ (pullup to +15 Vdc)

    CONTROL
    Residual Noise:< -70 dB (referred to -10 dBV)
    Off-Channel Attenuation:> 85 dB @ 1 kHz
    > 80 dB @ 10 kHz
    > 75 dB @ 20 kHz
    Crosstalk:Below noise floor
    Output Impedance:< 50 Ω, unbalanced
    Input Impedance:100 kΩ, unbalanced
    Frequency Response:15 Hz to 40 kHz (± 0.5 dB)
    THD+N:< 0.1% Typ. 0.05%
    Headroom:23 dB
    Gain:Unity
    Input and Output Level:-10 dBV
      26.8 kΩ
      12.7 kΩ
      None0 Ω (short to GND)

    AUDIO
    Ambient Operating Environment:0° C to 55° C
    Package Type:Cardboard Box
    WEEE weight:0.16 lbs.
    Shipping Weight:0.21 lbs.
    Tariff code:8543.70.9860
    Package Dimensions:2 x 2 x 4 in.

    Related Products

    Headphone Amplifiers
    • EZ-HDA6

      Stereo Headphone Distribution Amp - 1X6 Rear-Panel Outputs

    Switching & Control
    • EZ-HSX4

      Stereo Audio Input Switcher with Headphone Amp - 4X1

    • RU-ASX4D

      Stereo Audio Selector 4x1

    • RU-ASX4DR

      Remote Controlled Stereo Audio Selector with VCA 4x1

    • Line-Level Audio Switch 2x1

      ST-SSR1

      Line-Level Audio Switch - 2x1

    EMC
    • STS-RF1

      Shielded Chassis for STICK-ON module

    Related Products

    STICK-ON® Mounting Accessories
    • SMK-12

      STICK-ON Mounting Plate

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    Dimensions

    ST-SX4

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsFormat
    Engineering Functional BlockAmericanDXF
    Panel Diagram - EndAmericanDXF
    Panel Diagram - FrontAmericanDXF
    Panel Diagram - EndMetricDXF
    Panel Diagram - FrontMetricDXF
    High Res ImagesFormat
    st-sx4.zipTIF
    Declaration of Conformity
    Download

    Related Products

    • DS-RC4ST

      4 Channel Remote Control for ST-SX4 4x1 Audio Switcher

      Customizable Text

    • D-RC4ST

      4 Channel Remote Control for ST-SX4 4x1 Audio Switcher

      Customizable Text

    • DB-RC4ST

      4 Channel Remote Control for ST-SX4 4x1 Audio Switcher

      Customizable Text

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink