-
TX-70A
25 V, 70 V, 100 V Speaker Level Input Interface - Unbalanced line output
- Matches a 100, 70 or 25 volt speaker line to any unbalanced line-level audio input
- Trimmer adjusts output level for various input voltage/power levels
- Frequency response: 20 Hz to 20 kHz (+/- 0.5 dB)
- THD: < 0.05% (1 kHz)
TX-8A
4 Ohm / 8 Ohm Input Interface
- Converts an Amplifier Output to Line Level
- Bridges 4 or 8 Ohm Speaker Line
- Adjustable for Wide Range of Input Power Voltage
- Converts Amplified Levels from 0.5 W to 400 W
- Excellent Low Frequency Response
- Suitable to Feed a Subwoofer Amplifier Input
- Detachable Terminal Block Connections
- Balanced or Unbalanced Output
- Superior Quality Audio Transformer
- Bifilar Windings
- Galvanic Isolation
- Convenience of RDL TXs
TX-8i
Headphone Isolation Transformer
- Isolates headphones from source equipment
- Drives headphone impedance 8 Ω or greater
- Galvanic Isolation with the Convenience of RDL® TXs™
- Overload LED flashes when operating level is exceeded
- THD+N: < 0.1% (1 kHz @ 50 mW)
- Bandwidth: 100 Hz to 15 kHz
- HI-POT: 1.5 KVAC, 1mA, 2 Sec.
TX-A2
Audio Converter - Balanced to Unbalanced
- Unbalanced Audio Outputs from a Balanced Line
- Balanced to Unbalanced Conversion
- Mono Input to Stereo Output
- +4 dBu Input Level to -10 dBV Output Level
- Studio-Quality Transformer Isolation
- Passive Converter with Output Jacks
TX-A2D
Dual Audio Converter - Balanced to Unbalanced
- Unbalanced Audio Outputs from a Stereo Balanced Line
- Balanced to Unbalanced Conversion
- Stereo Input to Stereo Output
- +4 dBu Input Level to -10 dBV Output Level
- Studio-Quality Transformer Isolation
- Passive Converter with Output Jacks
TX-AFC1F
Balanced to Unbalanced Audio Transformer - XLR, RCA
- Studio Quality Bifilar Audio Transformer
- Galvanic Isolation with the Convenience of RDL® TXs™
- Connectorized with Gold Contacts on Input and Output
- Balanced to Unbalanced Conversion
- Professional to Consumer Level Conversion
- Frequency Response: 20 Hz to 20 kHz (+/- 0.1 dB)
- THD: < 0.06% (50 Hz to 20 kHz, +4 dBu input)
0.0015% (Typ. 1 kHz, +4 dBu input) - Input: +4 dBu (+22 dBu max.), 2.5 kΩ Bridging, XLR
- Output Level: -10 dBV, Phono jack
- CMRR: >85 dB (balanced input, 50 to 60 Hz)
TX-AFC1M
Unbalanced to Balanced Audio Transformer - RCA, XLR
- Studio Quality Bifilar Audio Transformer
- Connectorized Audio Format Conversion
- Galvanic Isolation with the Convenience of RDL TXs
- Gold Contacts on Input and Output
- Unbalanced to Balanced Conversion
- Unity Gain
TX-AT1
Audio Isolation Transformer - 600 Ω 1:1
- Studio Quality Bifilar Audio Transformer
- Terminal Block Transformer Connections
- Galvanic Isolation with 1:1 Transformer Coupling
- Transformer to Drive 600 Ohm Line
- Convenience of RDL® TXs™
- Frequency Response: 20 Hz to 20 kHz (+/- 0.1 dB)
- THD: < 0.035% (50 Hz to 20 kHz, +4 dBu input)
0.001% (Typ. 1 kHz, +4 dBu input) - Input / Output Level: +4 dBu, +22 dBu max.
- CMRR: > 85 dB (balanced input, 50 to 60 Hz)
TX-AT1S
Audio Isolation Transformer with Suppression
- Studio Quality Bifilar Audio Transformer
- Transient and RF Suppression
- Terminal Block Transformer Connections
- Galvanic Isolation
- 1:1 Transformer Coupling
- Transformer to Drive 600 Ohm Line
- Convenience of RDL TXs
TX-AVX
Automatic Video Switch - 2x1 - BNC
- Automatic Switchover to a Secondary Video Source
- Loss of Video Detection
- Dry-Contact Relay Output
- Detection of NTSC or PAL Signals
- Operation from AC or DC Power
TX-HRA3
10.4" Rack Mount for 3 TX Series Products
- Mounts up to Three RDL TX™ Series Products in a 10.4″ Rack
- Occupies One RU in a 10.4″ Rack
- All-Steel Construction
TX-J2
Unbalanced Input Transformer - Unbalanced stereo inputs to summed balanced mono output
- View the New, Updated TX-J3
- Mix two unbalanced audio signals to mono balanced
- Combine stereo into mono with balanced output
- Unbalanced to balanced conversion without gain
- Hum cancellation on unbalanced line inputs
- Frequency response 30 Hz to 20 kHz (+/- 1 dB)
TX-J3
Unbalanced Input Transformer - Unbalanced stereo inputs to summed balanced mono output
- Input on Dual Phono Jacks or Mini-jack
- Mix two unbalanced audio signals to mono balanced
- Combine stereo into mono with balanced output
- Unbalanced to balanced conversion without gain
- Hum cancellation on unbalanced line inputs
- Frequency response 30 Hz to 20 kHz (+/- 1 dB)
- Passive Converter with Input Jacks
TX-LC2
Unbalanced to Balanced Line Combiner
- Mix 2 Unbalanced Audio Signals to Mono Balanced
- Combine Stereo Into Mono with Balanced Output
- Output Gain Trim
- Isolation Between Inputs
- Unbalanced to Balanced Conversion
- High-Quality Audio
Sign inTopShopping cart close
