RDL®

Menu
0 $0.00

Products

Home / Products
  • AMS-TS1

    AMS-TS1

    Illuminated Touch-Activated Pushbutton

      • Bicolor Illuminated Capacitive Touch Switch
      • Activated by Finger Contact of a User
      • Toggle, Momentary or Pulse Mode Operation
      • Integral Controller with Open Collector Outputs
      • Functions Without an External Controller
      • Indicator Color Controlled by Internal Circuitry or Remote Equipment
      • Green Indicator Illuminates when Output is Active
      • Red Indicator Illuminates when Output is Inactive
      • Mounts in D-Style Standard Cutouts
      • Mounts in all RDL AMS Mounting Frames
      • Mounts in RDL Decora-Style Wall Plates
      • Bezel Provides Professional Aesthetic Appearance
  • AMS-XLF

    AMS-XLF

    XLR 3-Pin Female Jack - fits all AMS mounts

      • Mounts in D-Style Standard Cutouts
      • Mounts in all RDL AMS Mounting Frames
      • Mounts in RDL Decora-Style Wall Plates
      • Availability of a Wide Variety of Associated AMS Accessories
      • Provides Flexibility for Connections and Controls
  • AMS-XLM

    AMS-XLM

    XLR 3-Pin Male Jack - fits all AMS mounts

      • Mounts in D-Style Standard Cutouts
      • Mounts in all RDL AMS Mounting Frames
      • Mounts in RDL Decora-Style Wall Plates
      • Availability of a Wide Variety of Associated AMS Accessories
      • Provides Flexibility for Connections and Controls
  • AMS-XLRMA

    AMS-XLRMA

    Selectable Mic/Line XLR Output with Phantom Block

      • Attenuation Selector: Unity or 50 dB (mic output for a line input)
      • XLR Connector Protected from Phantom Voltage up to 55 Vdc
      • Mounts in D-Style Standard Cutouts
      • Mounts in all RDL AMS Mounting Frames
      • Mounts in RDL Decora-Style Wall Plates
      • Availability of a Wide Variety of Associated AMS Accessories
  • AV-AC2

    AV-AC2

    Cable Kit for AV-HK1 - Dual RCA to Mini-Plug; Dual RCA to Mini-Jack

      • 1 each Dual Phono to Stereo Mini-plug; Length: 8 in. (20 cm) + connectors
  • AV-DC4

    AV-DC4

    Line-Level Audio Divider/Combiner with Ground Lift

      • Combine Audio Signals to a Single Output
      • Combine Stereo Line-Level Signals
      • Feed a Mono Signal to Stereo Inputs
      • Combine Multiple Lines to a Single Input
      • Switch-Selectable Ground Isolation in Balanced Lines
      • Line-Level Ground-Loop Elimination
      • Balanced Mono Galvanic Isolation
      • Signal Divider or Combiner in Rugged Field Case
  • AV-HK1

    AV-HK1

    "Hum Killer" Audio Isolation Module

      • Ground Isolation in Unbalanced Line
      • Ground-Loop Elimination
      • Unbalanced Stereo Galvanic Isolation
      • Isolation in Rugged Field Case
      • Portable
      • Equipped for Surface Mounting
  • AV-HK1X

    AV-HK1X

    “HUM KILLER” Audio Isolation Transformer - XLR input and output

      • Ground Isolation in Balanced Line
      • Line-Level Ground-Loop Elimination
      • Balanced Mono Galvanic Isolation
      • Isolation in Rugged Field Case
      • Portable or Permanent Isolation Module
  • Dante interface that converts four line-level XLR inputs to network audio channels.

    AV-LN4

    Four Channel Line Level Audio to Dante Interface

      • Dante Network Interface for Four Audio Line-Level Inputs
      • Each XLR Input Provides a Network Digital Audio Level of -20 dBFS for a Balanced +4 dBu Input
      • Four XLR Front-Panel Inputs
      • Dual-LED VU Meter for Each Input
      • Special Software Not Required for Module Setup
      • High Resolution 24 Bit Analog to Digital Conversion
      • LED Indicator for Valid Power and Network Sync
      • Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
      • Mounts on a Microphone Stand using an RDL SF-MSM1
  • Dante to Stereo Headphone Amplifier

    AV-NH1

    Dante to Stereo Headphone Amplifier

      • Converts Two Dante Network Audio Signals to a Stereo Headphone
      • Output on Professional Quality 3.5 mm stereo Mini-Jack or ¼” Jack
      • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
      • Front-Panel Output Level Control
      • Special Software Not Required for Module Setup
      • Exceptional Low-Noise and Low-Distortion Performance
      • High Resolution 24 Bit Digital to Analog Conversion
      • Legendary RDL Analog Filtering Enhances Superb Audio Performance
      • LED Indicator for Valid Power and Network Sync
      • Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
      • Mounts on a Microphone Stand using an RDL SF-MSM1
  • 2 channel Dante Audio Interface

    AV-NL2

    Dante to Two Channel Line/Mic Audio Interface

      • Converts Two Dante Network Audio Signals to Balanced Analog
      • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
      • Each Output Switch-Selectable for Mic or Line Level
      • Normal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom
      • Microphone Output Level is Attenuated 50 dB
      • Each Output is Protected Against Phantom Voltage up to 48 Vdc
      • Special Software Not Required for Module Setup
      • Exceptional Low-Noise and Low-Distortion Performance
      • High Resolution 24 Bit Digital to Analog Conversion
      • Legendary RDL Analog Filtering Enhances Superb Audio Performance
      • LED Indicator for Valid Power and Network Sync
      • Operation from PoE Power (Class 0, IEEE 802.3af)
      • Equipped for SysFlex® Rack Mounting or Surface Mounting
  • AV-NL4

    AV-NL4

    Dante to Four Channel Line/Mic Audio Interface

      • Converts Four Dante Network Audio Signals to Balanced Analog
      • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
      • Each Output Switch-Selectable for Mic or Line Level
      • Normal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom
      • Microphone Output Level is Attenuated 50 dB
      • Each Output is Protected Against Phantom Voltage up to 48 Vdc
      • Special Software Not Required for Module Setup
      • Exceptional Low-Noise and Low-Distortion Performance
      • High Resolution 24 Bit Digital to Analog Conversion
      • Legendary RDL Analog Filtering Enhances Superb Audio Performance
      • LED Indicator for Valid Power and Network Sync
      • Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
      • Mounts on a Microphone Stand using an RDL SF-MSM1
  • Metal microphone to Dante interface box

    AV-XMN4

    Four Channel Mic to Dante Interface

      • Dante Network Interface for Four Audio Mic Inputs
      • Each XLR Input Provides Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
      • 48 V Mic Phantom (P48) on each input
      • Four XLR Front-Panel Inputs
      • Converts Four Standard XLR Mic Audio Sources to Dante Network Channels
      • Special Software Not Required for Module Setup
      • High Resolution 24 Bit Analog to Digital Conversion
      • LED Indicator for Valid Power and Network Sync
      • Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
      • Mounts on a Microphone Stand using an RDL SF-MSM1
  • CP-1

    CP-1

    Single Cover Plate - White

      • All-Steel Construction
      • Durable Powder Coated Finish
      • Compatible with Decora®-Style Products
      • Mounting Hardware Included
  • CP-1B

    CP-1B

    Single Cover Plate - Black

      • All-Steel Construction
      • Durable Powder Coated Finish
      • Compatible with Decora®-Style Products
      • Mounting Hardware Included
  • CP-1G

    CP-1G

    Single Cover Plate - Gray

      • All-Steel Construction
      • Durable Powder Coated Finish
      • Compatible with Decora®-Style Products
      • Mounting Hardware Included
  • Main menu
Shopping cart close