-
D-BLANK
Decora® Wall Plate with No Jack Cut Out
- All-Steel Construction
- Compatible with Decora®-Style Mounting Accessories
- Customizable Front-Panel Text
D-BNC
BNC Jack on Decora® Wall Plate - Solder type
- All-Steel Construction
- Compatible with Decora®-Style Mounting Accessories
- Customizable Front-Panel Text
D-BNC/D
Insulated Double BNC Jack on Decora® Wall Plate
- All-Steel Construction
- Compatible with Decora®-Style Mounting Accessories
- Customizable Front-Panel Text
D-BT1A
Wall-Mounted Bluetooth® Audio Format-A Interface
- Bluetooth Audio Input for Installed Sound System
- Intuitive Single Button Pairing with LED Status Indication
- Special Software Not Required for Module Setup
- Customize the Module ID Name and Programming Password through the Bluetooth Connection
- Sends Received Bluetooth Audio to RDL Format-A Receivers
- Mono Summed or Stereo Audio Input Mode is Switch-Selectable on Rear Panel
- Rear-Panel Switch Selects which RJ45 Pair (A, B or C) is Fed in Mono Summed Mode
- Daisy-Chain up to Three D SERIES-BT1A modules to One Format-A Receiver in Mono Mode
- Remotely Powered through Twisted Pair Cable
- Signal and Power Pair Pass-Through on RJ45 Jacks
Requirements: - To complete a Bluetooth setup using the D SERIES-BT1A Wall-Mounted Bluetooth® Audio Format-A Interface, at least one compatible Format-A receiver and its recommended power supply must be used.
D-BTN21
Bluetooth® Audio Dante Network Interface
- Bluetooth Audio Input for Dante or AES67 Networked System
- Bluetooth Stereo or Mono Sum Feeds Two Network Channels
- Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
- Intuitive Single Button Bluetooth Pairing with LED Status Indication
- Bluetooth Functions are Controllable in RDL CONSOLE Software
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Bluetooth Functions are Controllable using Compatible RDL Remote Controls
- Controllable Functions Include Pairing/Un-pairing, Media Source Track Selection and Level
- Bluetooth Track Title and Artist Data are Multicast on the Network to Compatible Devices
- Customize the Module ID Name, Settings and Mono/Stereo Mode using RDL CONSOLE Software
- Module is PoE Powered
- Available in Stainless Steel, Black and White
D-BZR
Piezo Alert Module
- Provides an Audible Alert of a Remote Condition
- LED Alarm Indicator
- Front-Panel Reset Button
- Remote Reset Provision
- Momentary or Latching Operation
- Selectable Audio Level
D-CIJ3
Consumer Input Jacks - Mono
- Stereo Inputs to Mono Output
- Stereo Inputs on RCA Jacks and Stereo Mini-Jack
- Unbalanced to Balanced Conversion Without Gain
- Transformer Isolation for Unbalanced Line Inputs
- Hum Cancellation on Unbalanced Line Inputs
- Line-Level Output to Feed 10 kΩ Equipment Inputs
- Output Connections on Detachable Terminal Block
- Mix Stereo Inputs to Mono Balanced
- Available in RDL White/Gray (D-CIJ3)
- Available in Stainless Steel (DS-CIJ3)
D-CIJ3D
Consumer Input Jacks - Stereo
- Stereo Inputs to Stereo Outputs
- Stereo Inputs on RCA Jacks and Stereo Mini-Jack
- Unbalanced to Balanced Conversion Without Gain
- Transformer Isolation for Unbalanced Line Inputs
- Hum Cancellation on Unbalanced Line Inputs
- Line-Level Output to Feed 10 kΩ Equipment Inputs
- Output Connections on Detachable Terminal Block
- Available in RDL White/Gray (D-CIJ3D)
- Available in Stainless Steel (DS-CIJ3D)
D-D1
Single plate for standard and specialty connectors
- All-Steel Construction
- Compatible with Decora®-Style Mounting Accessories
- Customizable Front-Panel Text
D-D1T
Single plate for standard and specialty connectors
- All-Steel Construction
- Compatible with Decora®-Style Mounting Accessories
- Customizable Front-Panel Text
D-D2
Double plate for standard and specialty connectors
- All-Steel Construction
- Compatible with Decora®-Style Mounting Accessories
- Customizable Front-Panel Text
D-F
Double Type F Jack on Decora® Wall Plate
- All-Steel Construction
- Compatible with Decora®-Style Mounting Accessories
- Customizable Front-Panel Text
D-HA1A
Format-A Stereo Headphone Amplifier
- Headphone Amplifier with User Level Control
- Output on Standard Mini-Jack
- Mounts in a Wall or Cabinet
- Input and Power Connection on RJ45
- Connects to Format-A Sender using Twisted-Pair Cable
- Powered from RDL Twisted Pair Format-A Sender
- RJ45 Loop-Thru for Connecting Additional Modules
- Protected by Automatically Resetting Fuse
- Decora® Design with All Steel Panel and Rear Enclosure
- Available in White, Black, and Stainless Steel
D-HPA3
3.5 Watt Audio Power and Headphone Amplifier
- Wall-Mounted Amplifier with 2 Outputs
- Balanced Input on the Rear Panel
- Speaker Output on the Rear Panel
- Mini-Jack Headphone Output on the Front Panel
- Setting to Turn Off Power Amplifier upon Headphone Connection
- Amplifier Muting Using Solid-State Switching
- Single Gain Adjustment for the Speaker and Headphone Amplifiers
- 3.5 Watt RMS Audio Amplifier into 8 Ohms
- 6.5 Watt RMS Audio Amplifier into 4 Ohms
- Output Drives 4 or 8 Ohm Speaker
- High-Efficiency Class D Operation
- Speaker Output Connection on Detachable Terminal Block
- Ultra-Compact All Metal Construction
- Thermal and Short-Circuit Protection
D-J1
Microphone Input Assembly
- Wall Mounted Microphone Input Panel
- XLR Input Connector with Gold Contacts
- Barrier Block Wiring Connections
- Ground-Lift Terminals on Barrier Block
D-J2
Line Input Assembly
- Wall Mounted Line-Level Audio Input Panel
- Gold Plated Phono Jacks
- Hum Cancellation on Unbalanced Line Inputs
- Transformer Isolation for Unbalanced Line Inputs
- Balanced Output for Unbalanced Line Inputs
Sign inTopShopping cart close