STICK-ONs are the original application-specific modules for the A/V, recording and broadcast industries. Module functions include signal detection, switching, pre-amplification, format conversion, line driving, power amplification, mixing, distribution, gain control, equalization, routing and more. Each STICK-ON® is an ultra-compact module engineered to provide higher performance and longer life than other industry products. STICK-ON modules are solid encapsulated hybrid circuits in durable industrial black plastic enclosures (1.55″, 3.94 cm x 3″, 7.62 cm x 0.65″, 1.65 cm) with clear bold white lettering for the terminal block connections, recessed trimming controls and switches.
Since RDL first originated application-specific modules, STICK-ONs have led the industry in economical, high-performance and cost-effective long life solutions in system designs. Multiple STICK-ON® modules can be interconnected to form all or part of an A/V system. A single STICK-ON® module may be mounted right where its function is needed, often to add an input, output, or gain adjustment to existing equipment. STICK-ON® modules allow customizing an A/V system to precisely match users’ needs. Adding STICK-ONs to an existing system can extend system life by adding updated features, resulting in considerable cost savings. A complete range of backboard and rack mounting options is available for systems comprised of multiple STICK-ON modules.
The technology used in STICK-ON® modules has been regularly updated over the years to insure industry-leading performance. Functions and features provided by STICK-ONs, since their introduction, are still available today. This continuity in product offering and support makes STICK-ON® modules the preferred long-term resource for system design solutions. STICK-ON® SERIES modules are designed and manufactured in the U.S.A.
DRA-35S
STICK-ON DIN Rail Adapter - 1 module
- Mounts One RDL STICK-ON® Module to 35 mm DIN Rail
- Compact Design Permits Mounting Multiple Modules to a Single DIN Rail
- Ideal for Use when Traditional Rack Mounting is Not Desired
DRA-35S6
STICK-ON DIN Rail Adapter - 6 modules
- Mounts Six RDL STICK-ON® Module to 35 mm DIN Rail
- Removable Shelves for Easy Installation and Module Adjustment
- Ideal for Use when Traditional Rack Mounting is Not Desired
MSR-1
Snap Rail Adapter - STICK-ON Series
- Mounts One RDL STICK-ON® to a 3.2 Inch Snap Rail
- Provides Easy, Secure Mounting
- All-Steel Construction
ST-ACR1
Line-Level Audio Controlled Relay - 0.5 to 5 s
- Switching Controlled by Audio Signal
- Sensing of Line-Level Signal
- Silence Sensing
- DPDT Switching Contacts
- Open-Collector SLAVE Output
ST-ACR1M
Microphone Level Audio Controlled Relay - 0.5 to 5 s delay
- Switching Controlled by Audio Signal
- Sensing of Microphone-Level Signal
- Silence Sensing
- DPDT Switching Contacts
- Open-Collector SLAVE Output
ST-ACR2
Line-Level Audio Controlled Relay - 5 to 50 s delay
- Switching Controlled by Audio Signal
- Sensing of Line-Level Signal
- Silence Sensing
- DPDT Switching Contacts
- Open-Collector SLAVE Output
ST-CL2
Compressor/Limiter - Line Level
- Positive Audio Level Protection
- Smooth Inaudible Gain Reduction
- Tight Audio Peak Control
- Very Low Noise Compressor
- Multi Stage Incremental Gain Reduction
- Fully Automatic Operation
- Superb Performance with Minimal Setup
- RDL® SupplyFlex™ Power Input Configuration
ST-CX2
Two Band Active Line-level Crossover
- Active Low-Frequency Woofer Equalization
- Active Full-Range Equalization
- Adjustable Equalization
- Crossover with Loop-through Output
- Low-Noise and Low-Distortion Crossover
- RDL® SupplyFlex™ Power Input Configuration
ST-CX2S
Subwoofer Crossover Filter
- Active Subwoofer Equalization
- Subwoofer Signal from Stereo Source
- Adjustable Low-Frequency Boost
- Low-Noise and Low-Distortion Crossover
- Active Crossover Component
- RDL® SupplyFlex™ Power Input Configuration
ST-DA3
Line Level Distribution Amplifier - 1x3
- Audio Distribution with up to 3 Outputs
- Balanced or Unbalanced Input and Outputs
- Bridge an Audio Line for Local Distribution
- Distribution with Impedance Conversion
- Distribution with Gain or Loss
- Inputs and Outputs RF-Protected
- 1×3 Mono or Use Two Units for Stereo
- RDL® SupplyFlex™ Power Input Configuration
ST-EQ3
3 Band Equalizer - Line Level
- 3-Band Audio Equalization
- Custom Tailored Audio Bandwidth
- Adjust To Pass Voice-Band Audio
- Adjust To Produce Smile-Curve for Music
- Low Noise and Low Distortion Equalization
ST-FS6
Ferrite Suppressor / RF Filter
- RF Suppression in Audio or Control Circuits
- Suppression with no Capacitance to Ground
- Suppression without Series Resistance
- Six Audio Conductors Suppressed
- Attenuation > 10 dB @ 10 MHz
- Attenuation > 25 dB @ 200 MHz
ST-GCA3
Gain Control Amplifier - Line Level
- Automatic Gain Control
- Wide Dynamic Range AGC
- Slow Inaudible Gain-Reduction
- Tight Dynamic Control
- Positive, Fast Gain Reduction
- Low-Noise and Low-Distortion AGC
- RDL® SupplyFlex™ Power Input Configuration
ST-GLA1
Gated Line Amplifier - Noise Gate
- Gated Line-level Preamplifier
- Self-Gating to Suppress Unwanted Noise
- Fast, Silent Audio Switching
- Integral Single-ended Noise Reduction
- Adjustable Gain and Threshold
- Balanced or Unbalanced Input / Output
- Open-Collector Logic Output
ST-GSP1
Gated Speech Preamplifier - Microphone to Line
- Gated Mic to Line Preamplifier
- Speech Activated Gating
- Fast, Silent Audio Switching
- Integral Single-Ended Noise Reduction
- Adjustable Gain and Threshold
- Balanced or Unbalanced Input / Output
- Phantom Power Provision
- Open-Collector Logic Output
ST-HP3
High Pass Filter - 300 Hz and 500 Hz
- Horn Loudspeaker Protection
- Low-Frequency Attenuation below 300 Hz
- Low-Frequency Attenuation below 500 Hz
- Line-Level Input and Outputs
- Filtering Requiring no Field Adjustment
- RDL® SupplyFlex™ Power Input Configuration
Sign inShopping cart close