SAS-HC8
Headphone Amplifier with Source Selection for SourceFlex Distributed Audio System
- Headphone listening station for exercise equipment or countertop
- Source selection and volume adjustment buttons
- Sealed touch controls protect internal circuitry
- ULTRASTYLE ™ design rugged metal enclosure
- Mounts to support pipe, handlebar or tabletop
- Automatic volume reduction to safe level when headphones left disconnected
SF-BNC2
Bidirectional Unbalanced Stereo Audio Network Interface
- Dante Network Interface for Two Audio Inputs and Two Audio Outputs
- Inputs and Outputs on Front-Panel RCA Jacks and Stereo 3.5 mm Mini-Jacks
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Converts Two Unbalanced Line-Level Audio Sources to Dante Network Channels
- Converts Two Dante Network Audio Signals to Unbalanced Line Level
- Special Software Not Required for Module Setup
- Exceptional Low-Noise and Low-Distortion Performance
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af)
- Equipped for SysFlex® Rack Mounting or Surface Mounting
SF-DN4
Digital Audio to Network Interface
- Converts Two Left/Right Digital Audio Sources to Four Dante Network Audio Signals
- AES/EBU or S/PDIF Coaxial or Optical Inputs
- Supports Input Sampling Rates from 32 kHz to 192 kHz
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Digital Signal Lock Indicator for Valid Inputs
- Transformer-Isolated AES/EBU Input
- Digital Audio Sources Remain in the Digital Domain through the Dante Network Output
- Special Software Not Required for Module Setup
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af)
- Equipped for SysFlex® Rack Mounting or Surface Mounting
SF-MSM1
SysFlex® Microphone Stand Mounting Adapter
- Mounts any SysFlex® Module on a Mic Stand (Standard 5/8″ 27 TPI)
- Compatible with All SysFlex® Modules
- Each SysFlex® Module Secured by One Single Screw
SF-ND2
Network to Digital Audio Interface
- Converts Two Dante Network Audio Signals to Left/Right Digital Audio
- AES/EBU or S/PDIF Coaxial or Optical Output
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Digital Audio Output Sample Rate Equals Dante Sample Rate
- Transformer-Isolated AES/EBU Output
- Dante Audio Signals Remain in the Digital Domain through the Output
- Special Software Not Required for Module Setup
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af)
- Equipped for SysFlex® Rack Mounting or Surface Mounting
SF-NH1
Dante to Stereo Headphone Amplifier
- Converts Two Dante Network Audio Signals to a Stereo Headphone
- Output on Professional Quality 3.5 mm stereo Mini-Jack
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Front-Panel Output Level Control
- Special Software Not Required for Module Setup
- Exceptional Low-Noise and Low-Distortion Performance
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af)
- Equipped for SysFlex® Rack Mounting or Surface Mounting
SF-NL2
Network to Audio Interface
- Converts Two Dante Network Audio Signals to Balanced Analog
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Each Output Switch-Selectable for Mic or Line Level
- Normal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom
- Microphone Output Level is Attenuated 50 dB
- Each Output is Protected Against Phantom Voltage up to 48 Vdc
- Special Software Not Required for Module Setup
- Exceptional Low-Noise and Low-Distortion Performance
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af)
- Equipped for SysFlex® Rack Mounting or Surface Mounting
SF-NP16E
PoE+ Dante to 16 W Mono Audio Amplifier - 70 V or 100 V
- 16 Watts RMS Constant Voltage Amplifier
- 70 V or 100 V Output
- Converts One Dante Network Audio Signal to a Mono Constant Voltage Output
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- 0 dBFS Input for 16 W Output
- Automatically limits supply current to protect against PoE+ port shutdown
- VCA Control on Detachable Terminal Block
- External Control Using 10 KΩ Potentiometer or 0 to 10 Vdc
- Compatible with RDL Remote Level Controls
- Special Software Not Required for Module Setup
- LED Indicator for Network Sync
- High-Efficiency Class D Operation
- Thermal and Short-Circuit Protection
- Plenum Rated per UL 2043 Standard
SF-NP35E
PoE++ Network to 35 W Mono Audio Amplifier - 70 V or 100 V
- 35 Watts RMS Constant Voltage Amplifier
- 70 V or 100 V Output
- Converts One Dante Network Audio Signal to a Mono Constant Voltage Output
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- 0 dBFS Input for 35 W Output
- Automatically limits supply current to protect against PoE++ port shutdown
- VCA Control on Detachable Terminal Block
- External Control Using 10 KΩ Potentiometer or 0 to 10 Vdc
- Compatible with RDL Remote Level Controls
- Special Software Not Required for Module Setup
- LED Indicator for Network Sync
- High-Efficiency Class D Operation
- Thermal and Short-Circuit Protection
- Plenum Rated per UL 2043 Standard
SF-NP40D
Network to 40 W Stereo Power Amplifier
- Converts Two Dante Network Audio Signals to two 20 W Outputs into 8 Ohms
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- 0 dBFS Input for 20 W per channel into 8 Ohms or 15 W per channel into 4 Ohms
- Special Software Not Required for Module Setup
- LED Indicator for Network Sync
- High-Efficiency Class D Operation
- Thermal and Short-Circuit Protection
- Included Power Supply 100 to 240 VAC, 50/60 Hz, 1.5A Input; 24 Vdc Output
- SF-NP40D includes North American Cord; SF-NP40DE excludes Power Cord
SF-NP50A
Network to 50 W Mono Audio Amplifier - 70 V or 100 V
- 50 Watts RMS Constant Voltage Amplifier
- 70 V or 100 V Output
- Plenum Rated per UL 2043 Standard
- Converts One Dante Network Audio Signal to a Mono Constant Voltage Output
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- 0 dBFS Input for 50 W Output
- Analog Balanced Mono Input or Unbalanced Stereo Mini-Jack Input
- Automatic Ducking Controlled by Network or Analog Input (Switch-Selectable)
- Ducking Attenuation -25 dB or “off” (Switch-Selectable)
- Balanced Line Output from Network Audio Source
- Automatically Limits Supply Current to Protect Against Power Supply Shutdown
- VCA Control on Detachable Terminal Block
- External Control Using 10 kΩ Potentiometer or 0 to 10 Vdc
- Compatible with RDL Remote Level Controls
- Special Software Not Required for Module Setup
- LED Indicators: Network Sync, Amplifier Mute, Analog Input Level, Ducking Threshold
- High-Efficiency Class D Operation
- Thermal and Short-Circuit Protection
SF-PA50A
50 W Mono Audio Amplifier - 70 V or 100 V
- 50 Watts RMS Constant Voltage Amplifier
- 70 V or 100 V Output
- Plenum Rated per UL 2043 Standard
- Analog Balanced Mono Input or Unbalanced Stereo Mini-Jack Input
- Adjustable Gain with Dual-LED VU Metering
- Automatically Limits Supply Current to Protect Against Power Supply Shutdown
- VCA Control on Detachable Terminal Block
- External Control Using 10 kΩ Potentiometer or 0 to 10 Vdc
- Compatible with RDL Remote Level Controls
- LED Indicators: Power, Amplifier Mute, Analog Input Level
- High-Efficiency Class D Operation
- Thermal and Short-Circuit Protection
SF-RA1
SysFlex® Rack Adapter
- 1 RU 19″ Rack Chassis for Mounting Multiple SysFlex® Modules
- Compatible with All SysFlex® Modules
- Each SysFlex® Module Secured by One Single Screw
- Easy Installation with provision for cable harnessing
SF-TPR24A
Line-Level Receiver
- Eight Separate Three-Pair Format-A Receiver Sections
- Receives up to 24 Audio Channels
- Three +4 dBu Balanced Outputs per Section
- Detachable Terminal Block Outputs
- Audio Outputs for All Three Pairs (A, B and C) per Section
- Local Power Feeds all Modules Connected to INPUTs
- Wiring Fault Protection by Automatic Resetting Fuse
- Local Power Input on Terminal Block or dc Power Jack
- Green LED per Section Indicates Validity of Module Remote Power
- Studio-Quality Precision Active Balanced Circuitry
SF-TPRS12A
Line-Level Sender / Receiver
- Four Separate Three-Pair Format-A Sender Sections
- Four Separate Three-Pair Format-A Receiver Sections
- Up to 24 Audio Channels, 12 Sender; 12 Receiver
- +4 dBu Balanced Audio Inputs and Outputs
- Local Audio Connections on Detachable Terminal Blocks
- Utilizes All Three Format-A Pairs
- Local Power Feeds all Modules Connected to RJ45 Connectors
- Wiring Fault Protection by Automatic Resetting Fuse
- Local Power Input on Terminal Block or dc Power Jack
- Green LED per Section Indicates Validity of Module Remote Power
- Studio-Quality Precision Active Balanced Circuitry
SF-TPS24A
Line-Level Sender
- Eight Separate Three-Pair Format-A Sender Sections
- Sends up to 24 Audio Channels
- Three +4 dBu Balanced Inputs per Section
- Detachable Terminal Block Inputs
- Audio Inputs to Feed Pairs A, B and C per Section
- Utilizes All Three Format-A Pairs
- Local Power Feeds all Modules Connected to OUTPUTs
- Wiring Fault Protection by Automatic Resetting Fuse
- Local Power Input on Terminal Block or dc Power Jack
- Green LED per Section Indicates Validity of Module Remote Power
- Studio-Quality Precision Active Balanced Circuitry
Sign inTopShopping cart close